ExamGecko
Search Search Login
Home Home / HP / HPE6-A69
Question list
Search
Search

List of questions

Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

A customer wants to implement a new Aruba 6300M 48-port iGbE Class 4 PoE and d-port SFP56 Switch solution. The customer wants to automatically provision devices, connected to the switch with correct settings. VoIP phones need to be placed in VLAN 10, send out traffic with a VLAN tag. The phone is LLDP-MED capable How can you accomplish this with the least amount of administrative effort? A) B) C) D)
With the given topology, the customer Has ArubaOS-CX 6300 switches and Aruba Gateway in use. What is required for the client traffic to be tunneled as per best practice between the connected switch port and the Aruba Gateway'' (Select two.)
(Scenarios may contain multiple errors which may or may not impact the solution) Refer to the Exhibit. An engineer has attempted to configure two pairs of switches m the referenced configuration it Is required to implement Multi-Chassis Link Aggregation for each pair of switches The ports of the Aruba 8325 switches used for Agg01 and Agg02 are populated as follows The configuration includes: There is an error message stating "mismatched group speed" What should you add to the configuration to correct the error?
Which statements are true with regards to Strict Priority scheduling? (Select two.)
The customer is considering Implemented the following VSX configuration that will host an Aruba mobility cluster servicing 9000 dual stack employee devices. The client's default gateways will be hosted on the VSX stack. The customer is seeking advice about how to ensure ArubaOS-CX VSX best practices have been applied. What advice can you offer the customer? (Select two)
You have created an OSPF neighbor configuration with ArubaOS-CX 8320 VSX and a third-party switch The OSPF peering falls. In the event togs you see the following entries. 2020-10-28:03:14 20.371489|hpe-routlng|LOG_WARN|AMM|1/5jOSPFV2|OSPFV2iOSPF 268698624 Packet received with unexpected authentication type 2020-10-28:03:14.20.371503|hperouting| LOG_WARN|AMM|1/5|OSPFV2|OSPFV2|Expected authentication type = 0 Which statement is true about the above events?
Refer to the exhibit. Aruba CX 6300 switch has routes in three different VRFs as per the example above. The user needs to leak routes between VRF Secure and VRF Dev. and also between VRF default and VRF Dev The customer Is not able to establish routing between directly connected networks 10.100.50.0/24 and 10.102.26.0/24 Which statement is true regarding the routing troubleshooting?
Refer to the exhibit. • For all traffic within VLAN 10. a remark action or DSCP value EF must be set • For all traffic exiting VLAN 10, a remark action of DSCP value AF41 must be set Which is the correct configuration? A) B) C) D)
A customer with an ArubaOS-CX 6300M switch is having a performance issue on the network and has received complaints about users experiencing intermittent connectivity. After performing troubleshooting it is determined that many of the local websites on the LAN that users are unable to reach are resolved to an invalid MAC address What are the minimum steps that should be performed to mitigate this condition? (Select two.)
Company A and Company B are merging their BGP routed networks The companies have overlapping IP ranges and security concerns during the migration phase. Which Aruba CX 8325 functionality would help the merging of networks in a secure way?

Question 20 - HPE6-A69 discussion

Report
Export

A client connected to Aruba CX 6300 on Port vt/2 Is having issues connecting to a remote destination 10 100 10 62 port 443. How should you get session-specific diagnostic information about this connection?

A.
Use diag utilities tcpdump desttnation-ip 10 10010.62 to capture the session
Answers
A.
Use diag utilities tcpdump desttnation-ip 10 10010.62 to capture the session
B.
Use diag utilities tcpdump destination-prefix 10 100 10.62/32 to capture the session
Answers
B.
Use diag utilities tcpdump destination-prefix 10 100 10.62/32 to capture the session
C.
Run tcpdump -interface "1/1/2" host 10.100 10.62 to capture the session
Answers
C.
Run tcpdump -interface "1/1/2" host 10.100 10.62 to capture the session
D.
Enter diag-mode and execute tcpdump ip.addr==10.100.10.62.
Answers
D.
Enter diag-mode and execute tcpdump ip.addr==10.100.10.62.
Suggested answer: B
Show Answer
asked 16/09/2024
Jason Smith
36 questions
PreviousPreviousNextNext
User
Your answer:
0 comments
Sorted by

Leave a comment first

ExamGecko

Copyright @2023 ExamGecko | All right reserved

Mail us: [email protected]
About us
Contact us
Twitter X
Facebook
Medium
Convert VPLUS to PDF
Open VPLUS files Easily and Quickly
Privacy Policy
Disclaimer
Terms