Home

Home / HP / HPE0-V15

Question list

List of questions

Question 1

(0)

What does the term composable mean when applied to HPE infrastructure?

Question 2

(0)

When configuring a single ProLiant Gen10 server, which embedded tool can be used to deploy a reliable and consistent configuration?

Question 3

(0)

Read the question, and then refer to the exhibit. <Switch-A>display int Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: UP Line protocol state: UP IP packet frame type: Ethe

Question 4

(0)

You are reviewing a series of MSA2052 storage designs for a customer's remote locations. Their largest remote site requires the highest possible level of internal data protection with at least 20 TB

Question 5

(0)

What is the correct cable type to use when connecting a server to a switch using 10 Gbps Short Range (SR) SFP+ optical connections?

Question 6

(0)

A customer needs a server memory subsystem that meets the following requirements: approaches the speed of traditional DRAM ensures high capacity, high performance, and ongoing data safety in case of

Question 7

(0)

DRAG DROP Match the speed and protocol with the appropriate component.

Question 8

(0)

Refer to the exhibit. You are validating a Nimble HF40 configuration created in OCA, and you receive an error when you run a CLIC check. Which Nimble component needs to be added to the configura

Question 9

(0)

Which storage array feature records only changes made to the base volume and keeps an earlier state of the original volume?

Question 10

(0)

A local state college is implementing a new VDI cluster to support computer and testing labs. They have the following requirements: Three VMware ESXi Hosts, each with one AMD processor, 1 TB of RAM

Open VPLUS File

Convert VPLUS to PDF

Related questions

What does the term composable mean when applied to HPE infrastructure?

A customer needs to add storage capacity to a host In a remote branch office. They have limited IT resources, so the solution requires ease of integration at a low price point Which HPE Storage family best meets these needs?

Which network protocol is used to build a loop-free logical topology for Ethernet networks?

You are discussing storage types with a customer that is configuring their NAS solution. The company's application developers use user-generated media and image files. For which type of data should this customer use file storage?

An administrator has two switches connected with a single link. The administrator observes that, during hours of peak activity, the storage traffic tends to consume the link. The link is shared with other types of traffic that is time sensitive. What technology can the administrator use to help alleviate the situation while they are working towards a long-term solution?

A customer requires an entry-level, all-flash system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency. Which HPE storage system needs the customer's requirements?

A customer has a single HPE ProLiant Gen 10 server. Which embedded management tool should they use to monitor the server?

A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports. They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating. Which architecture meets the customer requirements?

You are reviewing a series of MSA2052 storage designs for a customer's remote locations. Their largest remote site requires the highest possible level of internal data protection with at least 20 TB of storage. Which disk drive design is adequate for this site?

Read the question, and then refer to the exhibit. <Switch-A>display int Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: UP Line protocol state: UP IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK SFP_PLUS 10Gbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10 VLAN permitted: 10 Trunk port encapsulation: IEEE 802.1q Port priority: 0 <SNIP> An administrator connected a hypervisor to interface Ten-Gigabit Ethernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. These VLANs are configured to be tagged on the hypervisor. The administrator found that all the virtual machines within VLAN 20 can communicate with each other, but not to any resource on VLAN 20 outside the hypervisor. What must you do to resolve this issue?

Question 75 - HPE0-V15 discussion

Report

Which feature in a block storage array is effective in decreasing the size of blocks?

A.

thin provisioning

B.

thick provisioning

C.

compression

D.

deduplication

Show Answer

asked 16/09/2024

Angela Stevens

59 questions

User

Your answer: A B C D

0 comments

Sorted by

Leave a comment first