ExamGecko
Search Search Login
Home Home / HP / HPE6-A72
Question list
Search
Search

List of questions

Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

You need to remote into an AOS-CX switch using SSH in order to update the management IP address for future connections. Unfortunately, you mis-configured the IP address and are now locked out of the switch. What command could you have issued before making changes that would have recovered the original switch configuration after ten minutes?
Refer to the exhibit. The above command was applied to an Aruba AOS-CX 6300M 24-port switch with 4-port SFP56 uplinks. All ports are set as access switchports. Which ports carry VLAN 1 traffic?
What is the process where a compute device converts logical data bits into the correct physical representation depending on the media?
Refer to the exhibit. What change on Core-1 will result in a successful ping to 10.1.1.254 from the management interface?
What is an available command on an Aruba AOS-CX switch that would back up the secondary image to a secure remote repository?
What connectivity commands are available on AOS-CX switches? (Choose two.)
Refer to the exhibit. You are in the process of configuring VSF between Access-1 and Access-2. Access-1 has been configured as the VSF Master. What is a valid configuration for Access-2 to join the VSF stack?
Refer to the exhibit. Traffic is failing between Core-1 and Host-B. IP addressing has correctly been applied, and all interfaces are attached to the vrf GREEN. Which configuration will correct the issue?
Which two port characteristics must match between LAG interfaces? (Choose two.)
Core(config)# user admin password Core(config)# interface mgmt Core(config-if-mgmt)# ip static 10.254.16.89/22 Core(config-if-mgmt)# default-gateway 10.254.19.129 Core(config)# ssh server vrf mgmt Core(config)# https-server vrf mgmt You are tasked with configuring the Core switch to be managed by NetEdit. Currently, the Core switch is at factory-default settings. Which two steps are missing? (Choose two.)

Question 49 - HPE6-A72 discussion

Report
Export

Core(config)# user admin password

Core(config)# interface mgmt

Core(config-if-mgmt)# ip static 10.254.16.89/22

Core(config-if-mgmt)# default-gateway 10.254.19.129

Core(config)# ssh server vrf mgmt

Core(config)# https-server vrf mgmt

You are tasked with configuring the Core switch to be managed by NetEdit. Currently, the Core switch is at factory-default settings.

Which two steps are missing? (Choose two.)

A.
Core(config)# https-server rest access-mode read-write
Answers
A.
Core(config)# https-server rest access-mode read-write
B.
Core(config-if-mgmt)# no shutdown
Answers
B.
Core(config-if-mgmt)# no shutdown
C.
Core(config-if-mgmt)# no tftp-server
Answers
C.
Core(config-if-mgmt)# no tftp-server
D.
Core(config-if-mgmt)# enable
Answers
D.
Core(config-if-mgmt)# enable
E.
Core(config)# https-server rest access-mode read-only
Answers
E.
Core(config)# https-server rest access-mode read-only
Suggested answer: A, B
Show Answer
asked 16/09/2024
Karl Newick
31 questions
PreviousPreviousNextNext
User
Your answer:
0 comments
Sorted by

Leave a comment first

ExamGecko

Copyright @2023 ExamGecko | All right reserved

Mail us: [email protected]
About us
Contact us
Twitter X
Facebook
Medium
Convert VPLUS to PDF
Open VPLUS files Easily and Quickly
Privacy Policy
Disclaimer
Terms