ExamGecko
Search Search Login
Home Home / CWNP / CWNA-109
Question list
Search
Search

List of questions

Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

When using a spectrum to look for non Wi-Fi interference sources, you notice significant interference across the entire 2.4 GHz band (not on a few select frequencies) within the desktop area of a users workspace, but the interference disappears quickly after just 2 meters. What is the most likely cause of this interference?
ABC Company is planning a point-to-multipoint outdoor bridge deployment with standalone (autonomous) 802.11 bridge units. 802.1X/EAP will be used for bridge authentication. A Linux-based RADIUS server will be used for authentication. What device in the bridge implementation acts as the 802.1X Authenticator?
Which one of the following channels can be used for VHT transmissions according to the 802.11 specification?
What statement describes the authorization component of a AAA implementation?
A WLAN is implemented using wireless controllers. The APs must locate the controllers when powered on and connected to the network. Which one of the following methods is commonly used to locate the controllers by the APs?
In an 802.11n (H T) 2.4 GHz BSS, what prevents each station from using all the airtime when other client stations are actively communicating in the same BSS?
An IEEE 802.11 amendment is in the daft state. What impact does this draft amendment have on the 802.11 standard?
You must plan for POE in an office environment. Which one of these devices is least likely to be a POE PSE?
Which one of the following is not a factor considered when calculating the Link Budget for an outdoor point-to- point WLAN bridge link?
You have received a report of poor wireless connections on the third floor of a building under your administration. Three individuals have reported the problem. Apparently, the connections are reporting a strong signal, but the users cannot access the Internet. With the problem identified, what is the next logical step in the troubleshooting process?

Question 8 - CWNA-109 discussion

Report
Export

A dual-band 802.11ac AP must be powered by PoE. As a class 4 device, what power level should be received at the AP?

A.
30 W
Answers
A.
30 W
B.
12.95 W
Answers
B.
12.95 W
C.
25.5 W
Answers
C.
25.5 W
D.
15.4 W
Answers
D.
15.4 W
Suggested answer: C

Explanation:

PoE has different standards that define different power levels for PSEs and PDs. The original standard, IEEE 802.3af, defines two classes of PSEs: Class 3 (15.4 W) and Class 4 (30 W). The newer standard, IEEE 802.3at, also known as PoE+, defines four classes of PSEs: Class 0 (15.4 W), Class 1 (4 W), Class 2 (7 W), and Class 3 (12.95 W). The power level received at the PD is always lower than the power level provided by the PSE, due to cable resistance and power dissipation. The IEEE standards specify the minimum power level that must be received at the PD for each class of PSE.For a Class 4 PSE, the minimum power level received at the PD is 25.5 W910.Reference:CWNA-109 Study Guide, Chapter 7: Power over Ethernet (PoE), page 295;CWNA-109 Study Guide, Chapter 7: Power over Ethernet (PoE), page 289.

Show Answer
asked 16/09/2024
piera d'addelfio
33 questions
PreviousPreviousNextNext
User
Your answer:
0 comments
Sorted by

Leave a comment first

ExamGecko

Copyright @2023 ExamGecko | All right reserved

Mail us: [email protected]
About us
Contact us
Twitter X
Facebook
Medium
Convert VPLUS to PDF
Open VPLUS files Easily and Quickly
Privacy Policy
Disclaimer
Terms