ExamGecko
Search Search Login
Home Home / CWNP / CWNA-109
Question list
Search
Search

List of questions

Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

When using a spectrum to look for non Wi-Fi interference sources, you notice significant interference across the entire 2.4 GHz band (not on a few select frequencies) within the desktop area of a users workspace, but the interference disappears quickly after just 2 meters. What is the most likely cause of this interference?
ABC Company is planning a point-to-multipoint outdoor bridge deployment with standalone (autonomous) 802.11 bridge units. 802.1X/EAP will be used for bridge authentication. A Linux-based RADIUS server will be used for authentication. What device in the bridge implementation acts as the 802.1X Authenticator?
Which one of the following channels can be used for VHT transmissions according to the 802.11 specification?
What statement describes the authorization component of a AAA implementation?
A WLAN is implemented using wireless controllers. The APs must locate the controllers when powered on and connected to the network. Which one of the following methods is commonly used to locate the controllers by the APs?
An IEEE 802.11 amendment is in the daft state. What impact does this draft amendment have on the 802.11 standard?
You must plan for POE in an office environment. Which one of these devices is least likely to be a POE PSE?
Which one of the following is not a factor considered when calculating the Link Budget for an outdoor point-to- point WLAN bridge link?
You have received a report of poor wireless connections on the third floor of a building under your administration. Three individuals have reported the problem. Apparently, the connections are reporting a strong signal, but the users cannot access the Internet. With the problem identified, what is the next logical step in the troubleshooting process?
A dual-band 802.11ac AP must be powered by PoE. As a class 4 device, what power level should be received at the AP?

Question 98 - CWNA-109 discussion

Report
Export

ABC Company is planning to install a new 802.11ac WLAN, but wants to upgrade its wired infrastructure first to provide the best user experience possible. ABC Company has hired you to perform the RF site survey. During the interview with the network manager, you are told that the new Ethernet edge switches will support VoIP phones and 802.11 access points, both using 802.3 PoE.

After hearing this information, what immediate concerns do you note?

A.
The power budget in the edge switches must be carefully planned and monitored based on the number of supported PoE devices.
Answers
A.
The power budget in the edge switches must be carefully planned and monitored based on the number of supported PoE devices.
B.
The edge Ethernet switches should support Ether-channel to get the best results out of the network.
Answers
B.
The edge Ethernet switches should support Ether-channel to get the best results out of the network.
C.
VoIP phones and 802.11 access points should not be powered by the same edge switch due to distortion.
Answers
C.
VoIP phones and 802.11 access points should not be powered by the same edge switch due to distortion.
D.
If the switches are in optimal locations for VoIP phones, they are likely to be suboptimal locations for 802.11 APs
Answers
D.
If the switches are in optimal locations for VoIP phones, they are likely to be suboptimal locations for 802.11 APs
Suggested answer: A

Explanation:

An immediate concern that you note after hearing this information is thatthe power budget in the edge switches must be carefully planned and monitored based on the number of supported PoE devices. PoE stands for Power over Ethernet and is a technology that allows Ethernet switches to deliver power along with data to devices such as VoIP phones and 802.11 access points. PoE devices are classified into different classes based on their power consumption and output. The edge switches have a limited power budget that determines how many PoE devices they can support simultaneously. If the power budget is exceeded, some PoE devices may not receive enough power or may shut down unexpectedly. Therefore, it is important to plan and monitor the power budget in the edge switches based on the number and class of PoE devices connected to them. Using Ether-channel, placing switches in optimal locations, or avoiding distortion are not immediate concerns related to PoE devices.Reference:[CWNP Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 234; [CWNA: Certified Wireless Network Administrator Official Study Guide: Exam CWNA-109], page 224.

Show Answer
asked 16/09/2024
SERGIO FREITAS
38 questions
PreviousPreviousNextNext
User
Your answer:
0 comments
Sorted by

Leave a comment first

ExamGecko

Copyright @2023 ExamGecko | All right reserved

Mail us: [email protected]
About us
Contact us
Twitter X
Facebook
Medium
Convert VPLUS to PDF
Open VPLUS files Easily and Quickly
Privacy Policy
Disclaimer
Terms