Question 117 - CWNA-109 discussion

TWT is the feature of 802.11ax (HE) that is managed with beacon and trigger frames and is primarily a power management method, but also provides more efficient access to the channel used within a BSS. TWT stands for target wake time, which is a mechanism that allows an access point and a client device to negotiate and schedule specific times for data transmission and reception. This enables the client device to enter a low-power sleep mode when it is not expected to communicate with the access point, which saves battery life and reduces power consumption. TWT also reduces contention and interference on the channel used within a BSS, as it coordinates the transmissions of multiple client devices and avoids collisions. TWT is managed with beacon and trigger frames, which are two types of management frames that are used to announce and initiate data exchanges. A beacon frame is a frame that is periodically sent by an access point to advertise its presence, capabilities, and parameters to client devices. A trigger frame is a frame that is sent by an access point or a client device to request or initiate a data transmission with another device. BSS color, UL-MU-MIMO, and OFDMA are other features of 802.11ax (HE) that are not primarily power management methods, but rather performance enhancement methods. BSS color is a feature that assigns a color code to each BSS to differentiate it from other BSSs that use the same channel. This reduces interference and improves spatial reuse of the channel. UL-MU-MIMO is a feature that allows an access point to receive multiple simultaneous transmissions from different client devices using multiple spatial streams. This increases capacity and throughput of the uplink direction. OFDMA is a feature that divides a channel into smaller subchannels called resource units (RUs) that can be allocated to different devices for concurrent transmissions. This increases efficiency and flexibility of the channel utilization.Reference:CWNA-109 Study Guide, Chapter 10: Wireless LAN Operation, page 323