Refer to the exhibit. The BIG-IP Administrator has modified an iRule on one device of an HA pair. The BIG-IP Administrator notices there is NO traffic on the BIG-IP device in which they are logged into.What should the BIG-IP Administrator do to verify if the iRule works correctly?

Log in to the other device in the cluster, pull configuration to it, and start to monitor traffic on that device

Push configuration from this device to the group and start to monitor traffic on this device

Pull configuration to this device to the cluster and start to monitor traffic on this device

Log in to the other device in the cluster, push configuration from it, and start to monitor traffic on that device

Log in to the other device in the cluster, pull configuration to it, and start to monitor traffic on that device

A configuration change is made on the standby member of a device group.What is displayed as 'Recommended Action' on the Device Management Overview screen?

Synchronize the standby member configuration to the group

Force active member of device group to standby

Activate device with the most recent configuration

Synchronize the active member configuration to the group.

Synchronize the standby member configuration to the group

Refer to the exhibit. <a target='_blank' href='http://remote'>A user notifies the BIG-IP Administrator that http://remote company.com is NOT accessible. Remote</a>access to company resources must be encrypted.What should the BIG-IP Administrator do to fix the issue?

Add an iRule to remote.company.com_vs to redirect Traffic to HTTPS

Change the Listening Port on remote.company.com_vs to Port 80

Add a Pool to the Virtual Server remote.company.com_VS

Add an iRule to remote.company.com_vs to redirect Traffic to HTTPS

Change the Type of the Virtual Server remote.company.com_vs to Forwarding Requiring all traffic to be HTTPS access requires HTTP requests to be redirected directly to HTTPS.

A node is a member of various pools and hosts different web applications. If a web application is unavailable, the BIG-IP appliance needs to mark the pool member down for that application pool. What should a BIG-IP Administrator deploy at the pool level to accomplish this?

An HTTP monitor with custom send/receive strings

A UDP monitor with a custom interval/timeout

A combination of ICMP + TCP monitor

An HTTP monitor with custom send/receive strings

A TCP monitor with a custom interval/timeout

A Standard Virtual Server configured for an application reports poor network performance. This application is accessed mainly from computers on the Internet.What should the BIG-IP Administrator configure on the Virtual Server to achieve better network performance?

Protocol Profile (Client) with f5-tcp-wan and Protocol Profile (Server) with f5-tcp-lan

Protocol Profile (Client) with f5-tcp-lan

Protocol Profile (Client) with fS-tcp-lan and Protocol Profile (Server) with f5-tcp-wan

Protocol Profile (Client) with f5-tcp-optimized

Interface 1.2 on a BIG-IP VE has a status of UNINITIALIZED. What is the reason for this status?

Interface 1.2 has NOT been assigned to a VLAN.

Interface 1.2 has been added to a trunk.

Interface 1.2 has NOT been assigned to a VLAN.

Interface 1.2 has been disabled.

No default route has been created.

A BIG-IP Administrator is unable to connect to the management interface via HTTPS. What is a possible reason for this issue?

The IP address of the device used to access the management interface is NOT included in the 'httpd Allow' list in the CLI.

The port lockdown setting is configured to Allow None.

An incorrect management route is specified.

The IP address of the device used to access the management interface is NOT included in the 'P Allow' list in the Configuration Utility.

The IP address of the device used to access the management interface is NOT included in the 'httpd Allow' list in the CLI.

Refer to the exhibit. A BIG-IP Administrator needs to deploy an application on the BIG-IP system to perform SSL offload and re-encrypt the traffic to pool members.During testing, users are unable to connect to the application.What must the BIG-IP Administrator do to resolve the issue?

Configure an SSL Profile (Server)

Remove the configured SSL Profile (Client)

Configure Protocol Profile (Server) as splitsession-default-tcp

Enable Forward Proxy in the SSL Profile (Client)

Configure an SSL Profile (Server)

During a high-demand traffic event, the BIG-IP Administrator needs to limit the number of new connections per second allowed to a Virtual Server.What should the administrator apply to accomplish this task?

A connection rate limit to the Virtual Server

An HTTP Compression profile to the Virtual Server

A connection rate limit to the Virtual Server

A connection limit to the Virtual Server

A OneConnect profile to the Virtual Server

Users are unable to reach an application. The BIG-IP Administrator checks the Configuration Utility and observes that the Virtual Server has a red diamond in front of the status. What is causing this issue?

The Virtual Server is receiving HTTPS traffic over HTTP virtual.

The Virtual Server is disabled.

All pool members have been disabled.

A BIG-IP Administrator is conducting maintenance on one BIG-IP appliance in an HA Pair. Why should the BIG-IP Administrator put the appliance into FORCED_OFFLINE state?

To terminate existing connections to Virtual Servers and prevent the appliance from becoming active

To preserve existing connections to Virtual Servers and reduce the CPU load

To allow new connections to Virtual Servers and ensure the appliance becomes active

To terminate connections to the management IP and decrease persistent connections

To terminate existing connections to Virtual Servers and prevent the appliance from becoming active

An ecommerce company is experiencing latency issues with online shops during Black Friday's peak season.The BIG-IP Administrator detects an overall high CPU load on the BIG-IP device and wants to move the top utilized Virtual Servers to a dedicated BIG-IP device.Where should the BIG-IP Administrator determine the problematic Virtual Servers?

Statistics > Module Statistics > Local Traffic > Virtual Servers

Local Traffic > Virtual Servers > Virtual Server List

Statistics > Module Statistics > Local Traffic > Virtual Servers

One of the two members of a device group has been decommissioned. The BIG-IP Administrator tries to delete the device group, but is unsuccessful.Prior to removing the device group, which action should be performed?

Remove all members from the device group

Remove the decommissioned device from the device group

Make sure all members of the device group are in sync

Refer to the exhibit. A BIG-IP Administrator needs to configure health monitors for a newly configured server pool named Pool_B.Which health monitor settings will ensure that all pool members will be accurately marked as available or unavailable?

HTTPS, HTTP, FTP, and SSH, with the Availability Requirement of at least one monitor

HTTPS, HTTP, FTP, and ICMP, with the Availability Requirement of all health monitors

HTTPS, HTTP, FTP, and SSH, with the Availability Requirement of at least one monitor

HTTPS and HTTP with the Availability Requirement of at least one health monitor

HTTPS, HTTP, FTP, and SSH with the Availability Requirement of all health monitors

A BIG-IP Administrator is configuring a pool with members who have differing capabilities. Connections to pool members must be load balanced appropriately.Which load balancing method should the BIG-IP Administrator use?

Weighted Least Connections (member)

A BIG-IP Administrator needs to install a HotFix on a standalone BIG-IP device, which has HD1.1 as the Active Boot Location. The BIG-IP Administrator has already re-activated the license and created an UCS archive of the configuration. In which sequence should the BIG-IP Administrator perform the remaining steps?

Install base Image in HD1.2, Install HotFix in HD1.2, Activate HD 1.2

Install HotFix in HD 1.1, Reboot the BIG-IP device. Install UCS Archive

Install HotFix in HO 1.2, Install base Image in HD 1.2, Activate HD1.2

Install base Image in HD1.2, Install HotFix in HD1.2, Activate HD 1.2

Activate HD 1.2, Install base image in HD 1.2. Install HotFix in HD 1.2

For a given Virtual Server, the BIG-IP must perform SSL Offload and negotiate secure communication overTLSvl.2only.What should the BIG-IP Administrator do to meet this requirement?

Configure a custom SSL Profile (Client) with a custom TLSV1.2 cipher string

Configure a custom SSL Profile (Client) and select no TLSvl in the options list

Configure a custom SSL Profile (Client) with a custom TLSV1.2 cipher string

Configure a custom SSL Profile (Server) and select no TLSvl in the options list

Configure a custom SSL Profile (Server) with a custom TLSV1.2 cipher string

All pool members are online. All other virtual server settings are at default What might after the load balancing behavior?

enabing a falback host in the http profile

A custom HTTP monitor is failing to a pool member 10.10.3.75:8080 that serves up www.example.com.A ping works to the pool member address.The SEND string that the monitor is using is: GET/HTTP/l.l/r/n/Host.www.example.com/r/n/ConnectionClose/r/n/r/nWhich CLI tool syntax will show that the web server returns the correct HTTP response?

curl-header 'Host:www.example.com' http://10.10.3.75:8080/

curlhttp://10.10.10.3.75:8080/www.example.com/index.html

curl-header 'Host:www.example.com' http://10.10.3.75:8080/

tracepath 'http://www.example.com:80

tracepath 10.10.3.75:8080 GET /index

A BIG-IP Administrator reviews the log files to determine the cause of a recent problem and finds the following entry.Mar 27.07.58.48 local/BIG-IP notice mcpd {5140} 010707275 Pool member 172.16.20.1.10029 monitor status down.What is the cause of this log message?

The monitor attached to the pool member has failed.

The pool member has been disabled.

The pool member has been marked as Down by the BIG-IP Administrator.

The monitor attached to the pool member needs a higher timeout value.

The monitor attached to the pool member has failed.

Which method is recommended for creating a new user from the CLI?

Run tmsh create auth user username prompt for password' from bash

Run f5adduser username' then 'f5passwd username' from bash or tmsh

Run tmsh create auth user username prompt for password' from bash

edit bigip.conf to add the new user and the user's clear-text password

Run useradd username' then 'passwd username' from bash tmsh

How should a BIG-IP Administrator persistent sessions from being sent to a pool member so that the server administrator can perform maintenance?

add an additional monitor to the poor

A BIG-IP Administrator defines a device Self IP . The Self IP is NOT reachable from the network. What should the BIG-IP Administrator verify first?

The correct VLAN has been selected.

The correct interface has been selected.

The correct VLAN has been selected.

Verify if auto last hop is disabled.

The correct Trunk has been selected.

F5 201 Practice Test 2 - Free Online Exam Questions 41-80

The interface 1.1 of the BIG-IP device has been connected to a link dedicated to traffic on VLAN 120. What should the BIG-IP Administrator do to receive traffic from the VLAN?

Create a new VLAN object and set Customer Tag to 120

Create a new VLAN object and assign the interface 1.1 untagged

Create a new trunk object with interface 1.1 assigned

Create a new trunk object and assign it to the VLAN

Comment (0)

F5 201 Practice Test 2

Question

F5 201 Practice Tests

Practice Tests