A technician is preparing to set up a gaming computer with the following components:A technician is preparing to set up a gaming computer with the following components:Discrete, high-end graphics cardVideo capture cardHigh-end processorMultiple hard drivesUSB 3.0 hubSound cardWhich of the following options is the MOST important for the technician to consider before building the gaming computer?

20-pin vs. 24-pin power adapter

A technician is troubleshooting an old desktop system that randomly shows a Windows BSOD or powers off unexpectedly. All system temperatures are within normal limits. Which of the following should the technician do NEXT?

Visually inspect the motherboard capacitors.

Verify all case fans are operational.

Check that the BIOS version supports the installed CPU.

Compare the software requirements with the installed RAM.

A new employee has been issued a company laptop. The employee requests an accessory with a single power source that has wired network connectivity and supports a keyboard, mouse, speakers, and dual monitors. Which of the following accessories should the systems administrator deploy to BEST meet the new user's needs?

Docking station with DisplayPort

A technician is troubleshooting a computer that is not completing POST and gets stuck at the manufacturer logo screen. All internal, removable parts have been disconnected and only the minimum parts necessary to POST were reconnected. However, the symptoms remain the same.Which of the following should the technician try NEXT?

Test the RAM in different slots, one at a time.

Remove and test the power supply.

A technician is replacing the RAM on an entry-level server with hot-swappabte components. Which of the following should the technician do NEXT?

Verify that the OS supports hot swapping the RAM

Replace the RAM while the server is at a cool temperature

Replace the RAM while the server is running

Power down the server completely and then replace the RAM

Verify that the OS supports hot swapping the RAM

A user who works with sensitive data has a computer configured with hard drive encryption The TPM is active and hosting the encrypted key. After an upgrade to the motherboard. RAM and video card the hard drive is not booting and data cannot be accessed from the hard drive. Which of the following should the technician do to enable the system to boot again and get access to the stored data?

Boot into the BIOS and enable the TPM on the new motherboard.

Use data recovery software to find and recover the hard drive information

Access the BIOS and select to rebuild the degraded RAID array

Boot into the BIOS and enable the TPM on the new motherboard.

Return the replaced motherboard back to the computer

Which of the following is the SAFEST way to replace RAM on a server that has a redundant power supply?

Replace the RAM while the server is running.

To control costs a company provides a limited number or users with company phones One of these users opens a support ticket because the phone no longer allows internet Drowsing over a cellular connection The user acknowledges that the phone worked before the user's child streamed several movies using the device Which of the following describes why the phone cannot browse the Internet?

The device has a data cap and has reached that limit

The child accidentally connected to a neighbor's WLAN

The company's group policy disabled the device

The device has a data cap and has reached that limit

The device's plan has been unpaid

A technician just finished assembling a new PC for a client. Upon POST, the device presents an unspecified beep code and turns off automatically after five seconds. The technician double-checks the bill of materials for the new build and confirms all items have been installed. Which of the following should the technician do NEXT?

Verify the header panel connector is properly connected.

Ensure thermal paste is being used on the CPU.

Check to make sure that any video cards have auxiliary power cabling connected.

Verify the header panel connector is properly connected.

Spot-check that the I/O shield for the motherboard is properly installed.

The IT department issued a corporate smartphone to a user, but the user returned the device stating it had connectivity Issues. The user claimed the device functioned on WI-FI but all connectivity to cloud services was lost as soon as the device was taken off site. Which of the following issues was MOST likely affecting the device?

The device never had a proper SIM card installed.

MDM was never properly set up on the device.

S/MIME certificates were corrupted and needed to be reloaded.

Bluetooth on the device was disabled by mistake.

The device never had a proper SIM card installed.

A technician is working on a help desk ticket for a user who wants the filament replaced in a 3-D printer. Which of the following should the technician do to remove the old filament and load the new one?

Preheat the nozzle to melting temperature.

Cut a sharp angle on the end of the strand.

Push the filament along until resistance is felt.

Withdraw the filament and remove the spool.

A user is unable to plug a USB 3.0 device into a USB port. Upon inspection, a technician notices the USB 3.0 port appears to be slightly smaller than the other connections. Which of the following Is the MOST likely cause?

The USB port belongs to a different form factor.

A foreign object Is stuck Inside the port

The cable connection utilized the wrong orientation.

The USB cable is physically damaged.

The USB port belongs to a different form factor.

A technician has set up a new conference room with a TV and a video soundbar. The technician wants to test the system with a conference call. During the test, the TV speaker produces sound, but the soundbar does not. Which of the following is the MOST likely cause of the issue?

The TV's HDMI-ARC port is not being used.

The volume on the TV needs to be turned up.

The conference call needs to be unmuted for audio.

An incorrect HDMI cable is being used.

The TV's HDMI-ARC port is not being used.

Which of the following is the SAFEST way to replace RAM on a server that has a redundant power supply?

Replace the RAM while the server is running.

A technician responds to a help desk ticket that indicates a user's workstation is not booting. The technician initially suspects a failed hard drive. The technician performs diagnostics and confirms the hard drive is fully operational.Which of the following steps should the technician complete NEXT?

Consider another possible cause of the issue.

Reinstall the operating system.

Report the status of the drive and close the ticket.

Consider another possible cause of the issue.

Restore the latest backup of the system.

The owner of a restaurant reports that wireless network connections are lost intermittently throughout the day. Which of the following steps should a technician take to troubleshoot the issue?(Select TWO).

Identify the location of devices that utilize 2.4GHz.

Map all of the wireless signals in the restaurant.

Identify the location of devices that utilize 2.4GHz.

Check to see if the phones are IJTP or STP lines.

Test to see if the copper electrical Wires are causing interference.

Map all of the wireless signals in the restaurant.

Verify T568B is being used in the wiring closet patch panel.

Schedule timed router reboots throughout the day.

Which of the following options provides correct information about 2.4GHz and 5GHz wireless frequencies? (Select TWO)

2.4GHz penetrates solid objects more effectively. 5GHz provides faster data connections.

2.4GHz has a higher coverage area. 5GHz has higher bandwidth.

2.4GHz has less interference. 5GHz transmits inlower speed.

2.4GHz penetrates solid objects more effectively. 5GHz provides faster data connections.

2.4GHz has a higher data rate. 5GHz has 23 channels.

2.4GHz has Il channels. 5GHz has no data interference.

2.4GHz has a higher coverage area. 5GHz has higher bandwidth.

2.4GHz has a higher bandwidth. 5GHz has lower transmit power.

CompTIA 220-1101 Practice Test 5 - Free Online Exam Prep & Questions

A user is unable to access the internet on a PC. A technician examines the PC and runs the following commands:

CompTIA 220-1101 image Question 161 92753 10022024175002000000

Which of the following steps in the troubleshooting process does this series of commands represent?

Establish a theory.

Verify full system functionality.

Establish a plan of action.

Identify the problem.

Comment (1)

CompTIA 220-1101 Practice Test 5

Question

CompTIA 220-1101 Practice Tests

Practice Tests