VMware 2V0-33.22 Practice Test - Questions Answers

Compute Gateway (CGW) The CGW is a Tier 1 router that handles network traffic for workload VMs connected to routed compute network segments. Compute gateway firewall rules, along with NAT rules, run on the Tier 0 router. In the default configuration, these rules block all traffic to and from compute network segments (see Configure Compute Gateway Networking and Security).

https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/vmc-on-aws-networking-security.pdf

The best solution for improving application performance in this situation is to deploy VMware HCX.VMware HCX provides efficient replication and data mobility between VMware Cloud on AWS and the on-premises data center. It also provides advanced traffic engineering capabilities, which allows the administrator to shape the traffic and prioritize applications based on the needs. This will help ensure that the replication traffic does not impact the performance of other applications.Additionally, VMware HCX supports a much larger bandwidth than an IPSec VPN connection, so it can provide a more reliable connection for replicating larger amounts of data.For more information about deploying VMware HCX, please refer to the official VMwaredocumentation: https://docs.vmware.com/en/VMware-HCX/index.html.

VMware vSAN is a distributed storage platform that is integrated into the VMware Cloud software- defined data center (SDDC). It provides policy-based storage management, allowing cloud administrators to define storage policies that can be applied to virtual machines and other workloads. These policies govern how data is stored, replicated, and secured, and are used to ensure that data is stored in a consistent and compliant manner.

Hybrid Linked Mode can tolerate a time skew of up to ten minutes between the on-premises data center and the cloud SDDC. The maximum latency between your cloud SDDC and on-premises data center cannot exceed 100 msec roundtrip.

https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vsphere.vmc-aws- manage-data-center-vms.doc/GUID-BE75F0F1-2864-4926-97FE-37E635471C43.html

According to the VMware documentation you provided, it is possible to change a VM storage policy for an ISO image by modifying the default VM storage policy.To change the storage policy for an ISO image, the administrator can follow these steps: Go to the vSphere Web Client and navigate to the ISO image in question.Right-click the ISO image and select "Manage"Select "Storage Policies"Select a new storage policy from the list or create a new policy Click on the "Change Policy" button to apply the new storage policy to the ISO image.It's important to note that when you modify the default storage policy, all new files created after the change will be created with the new storage policy. However, this change doesn't affect the existing files that were created with the previous default storage policy. Please accept my apologies for any confusion caused by my previous response.

Planning for the Deployment: During the planning process, you take the following steps to identify and gather information needed for your deployment: Identify the subscription that you plan to use to deploy Azure VMware Solution.Identify the resource group that you want to use for your deployment.Identify the region in which you want Azure VMware Solution deployed.Define the resource name for your Azure VMware Solution private cloud.Identify the size of the hosts that you want to use when deploying Azure VMware Solution.Define the number of hosts that you want to deploy to the first cluster for your deployment.Request a host quota (capacity) early so that you will be ready to deploy your Azure VMware Solution private cloud.Identify the /22 CIDR IP segment for your private cloud management.Define the IP address network segment for your VM workloads.Define the virtual network gateway.Define VMware HCX® network segments.

Reference:https://learn.microsoft.com/en-us/azure/azure-vmware/deploy-azure-vmware-solution?tabs=azure- portal

https://kubernetes.io/docs/concepts/overview/components/#control-plane-components

https://docs.vmware.com/en/VMware-vSphere/7.0/vmware-vsphere-with-tanzu/GUID-4D0D375F- C001-4F1D-AAB1-1789C5577A94.htmlTanzu CLI is a command-line interface used to create, scale, upgrade, and delete workload clusters that are part of the Tanzu Kubernetes Grid [1]. Tanzu CLI also allows you to manage the components of the Tanzu Kubernetes Grid [1], such as the Tanzu Kubernetes cluster and the Tanzu Supervisor cluster. It also provides access to the Tanzu Kubernetes Grid extensions [1], which allow you to extend the functionality of the Tanzu Kubernetes cluster.

https://docs.vmware.com/en/VMware-Cloud-on-AWS/services/com.vmware.vmc-aws- operations/GUID-1A175E91-2317-4261-A63E-B398D92ECE8D.html vMotion Requirements for SDDCs With NSX: Networking speed and latency: Migration with vMotion requires sustained minimum bandwidth of 250 Mbps between source and destination vMotion vMkernel interfaces, and a maximum latency of 100 ms round trip between source and destination.On-premises vSphere version: Your on-premises vSphere installation must be vSphere 6.7U2 or higher. See VMware Knowledge Base article 56991 for more information.On-premises DVS version: 6.0 or higher.On-premises NSX version: any Note: SDDCs configured with NSX do not support hot vMotion to or from on-premises VXLAN encapsulated networks (NSX for vSphere) or Geneve Datacenter Overlay networks (NSX).IPsec VPN: Configure an IPsec VPN for the management gateway.See Configure a VPN Connection Between Your SDDC and On-Premises Data Center in the VMwareCloud on AWS Networking and Security guide.Direct Connect: Direct Connect over a private virtual interface between your on-premise data center and your VMware Cloud on AWS SDDC is required for migration with vMotion.See Using AWS Direct Connect with VMware Cloud on AWS.Hybrid Linked Mode: Hybrid Linked Mode is required to initiate migration from the vSphere Client. It is not required to initiate migration using the API or PowerCLI.See "Hybrid Linked Mode" in Managing the VMware Cloud on AWS Data Center.L2 VPN: Configure a Layer 2 VPN to extend virtual machine networks between your on-premises data center and cloud SDDC. Routed networks are not supported. See VMware Cloud on AWS Networking and Security. VMware Cloud on AWS firewall rules Ensure that you have created the necessaryfirewall rules as described in Required Firewall Rules for vMotion.On-premises firewall rules: Ensure that you have created the necessary firewall rules as describedin Required Firewall Rules for vMotion.Virtual machine hardware and settings: Ensure that these requirements are met for virtual machine hardware.Virtual machine hardware version 9 or later is required for migration with vMotion from the on- premises data center to the cloud SDDC.EVC is not supported in the VMware Cloud on AWS SDDC.VMs that are created in the cloud SDDC or that have been power-cycled after migration to the cloud SDDC can't be migrated back to the on-premises data center with vMotion unless the on-premises EVC baseline is Broadwell. You can relocate these VMs after powering them off, as long as their virtual machine hardware version is compatible with the on-premises data center.Migration of VMs with DRS or HA VM overrides is not supported. For more information on VMoverrides, see Customize an Individual Virtual Machine.Important: Source switch configurations (including NIOC, spoofguard, distributed firewall, and Switch Security) and runtime state are not applied at the destination as part of migration in either direction.Before you initiate vMotion, apply the source switch configuration to the destination network.In order for a virtual machine to be migrated using VMware vSphere vMotion, the versions of VMware vSphere need to match between the on-premises data center and the cloud SDDC, and a Layer 2 connection needs to be configured between them. Additionally, cluster-level Enhanced vMotion Compatibility (EVC) must be configured in both the on-premises data center and the cloud SDDC. IPsec VPN and AWS Direct Connect do not need to be configured for the migration to occur.