Ask Question
VMware 2V0-41.24 Practice Test - Questions Answers
Question list
List of questions
Related questions
Question 1
An NSX administrator is reviewing syslog and notices that Distributed Firewall Rules hit counts are not being logged.
What could cause this issue?
Zero Trust Security is not enabled.
Syslog is not configured on the NSX Manager.
Syslog is not configured on the ESXi transport node.
Distributed Firewall Rule logging is not enabled.
Explanation:
If Distributed Firewall Rule hit counts are not being logged, it is likely because Distributed Firewall Rule logging is not enabled. For hit counts to appear in the logs, logging must be explicitly enabled on each firewall rule where tracking is required. Without enabling logging at the rule level, no hit count information will be recorded in syslog.
Question 2
How is the RouterLink port created between a Tier-1 Gateway and Tier-0 Gateway?
Automatically created when Tier-1 is created.
Manually create a Logical Switch and connect to bother Tier-1 and Tier-0 Gateways.
Manually create a Segment and connect to both Tier-1 and Tier-0 Gateways.
Automatically created when Tier-1 is connected with Tier-0 from NSX Ul.
Explanation:
The RouterLink port between a Tier-1 Gateway and a Tier-0 Gateway is automatically created when the Tier-1 Gateway is connected to the Tier-0 Gateway through the NSX UI. This link enables routing between the Tier-1 and Tier-0 gateways without the need for manual configuration of segments or logical switches.
Question 3
An administrator needs to download the support bundle for NSX Manager.
Where does the administrator download the log bundle from?
System > Support Bundle
System > Settings
System > Utilities > Tools
System > Settings > Support Bundle
Explanation:
To download the support bundle for NSX Manager, an administrator navigates to System > Support Bundle in the NSX Manager UI. This section provides options to generate and download the log bundle, which contains diagnostic information useful for troubleshooting and support.
Question 4
Which two statements are true for IPSec VPN? (Choose two.)
IPSec VPN services can be configured at Tier-0 and Tier-1 gateways.
Dynamic routing is supported for any IPSec mode in NSX.
IPSec VPNs use the DPDK accelerated performance library.
VPNs can be configured on the command line interface on the NSX manager.
Explanation:
IPSec VPN services can be configured at Tier-0 and Tier-1 gateways: In NSX, IPSec VPN services can be applied to both Tier-0 and Tier-1 gateways, allowing secure site-to-site connections from these gateway levels.
IPSec VPNs use the DPDK accelerated performance library: NSX leverages the Data Plane Development Kit (DPDK) for optimized performance, which accelerates packet processing for IPSec VPNs and improves throughput.
Question 5
An NSX administrator noticed that the nsxcli command times out after 600secs of idle time.
Which CLI command disables the nsxcli time out value on NSX Manager?
set cli-timeout 1
set cli-timeout enabled
set cli-timeout disabled
set cli-timeout 0
Explanation:
Setting the cli-timeout value to 0 disables the CLI timeout on NSX Manager, preventing the nsxcli session from timing out due to inactivity. This ensures that the session remains active indefinitely until manually closed.
Question 6
Which tool could be used to configure BGP on a Tier-0 Gateway?
ESX CLI
NSX CLI
API
iPerf3
Question 7
Which two of the following parameters are required for deploying the NSX Application Platform? (Choose two.)
Interface Name
Upload XML File
Cluster Format Type
Interface Service Name
Upload Kubernetes Configuration File
Explanation:
Cluster Format Type: This parameter specifies the type of cluster format that will be used for the NSX Application Platform deployment.
Upload Kubernetes Configuration File: NSX Application Platform requires a Kubernetes environment, and the configuration file for Kubernetes must be uploaded to facilitate the deployment.
Question 8
Which three of the following describe the Border Gateway Routing Protocol (BGP) configuration on a Tier-0 Gateway? (Choose three.)
It supports a 4-byte autonomous system number.
Can be used as an Exterior Gateway Protocol.
The network is divided into areas that are logical groups.
EIGRP is disabled by default.
BGP is enabled by default.
Explanation:
It supports a 4-byte autonomous system number: BGP on a Tier-0 Gateway supports 4-byte AS (Autonomous System) numbers, which are necessary for larger routing domains.
Can be used as an Exterior Gateway Protocol: BGP is commonly used as an Exterior Gateway Protocol to establish routing between different autonomous systems (AS).
BGP is enabled by default: On a Tier-0 Gateway, BGP is typically enabled by default, allowing administrators to configure it for external routing.
Question 9
Which CLI command on NSX Manager and NSX Edge is used to change NTP settings?
set timezone
set ntp-server
get timezone
get time-server
Explanation:
The set ntp-server command is used on NSX Manager and NSX Edge to configure the NTP (Network Time Protocol) settings. This command allows administrators to specify the NTP server, ensuring that the NSX components synchronize their time accurately with the designated time server.
Question 10
What is the VMware recommended way to deploy a virtual NSX Edge Node?
Through the NSX Ul
Through automated or interactive mode using an ISO
Through the vSphere Web Client
Through the OVF command line tool
Explanation:
VMware recommends deploying a virtual NSX Edge Node using an ISO in either automated or interactive mode. This method provides flexibility and ensures that the NSX Edge node is deployed properly with all the necessary configurations. Using an ISO allows for a more streamlined and controlled deployment process, especially in larger environments.
Question