A network engineer finds an error that says, "BIOS failed power-on self-test." When the engineer checks the console, they discover that the Cisco UCS Blade firmware upgrade process stopped at the "Configuring and testing memory" stage.Which set of actions resolves the issue?A. 1. Add the CIMC firmware on a server.

1. Update the BIOS firmware on a server.

Initialize the CIMC firmware on a server.

1. Update the BIOS firmware on a server.

Activate the BIOS firmware on a server

1. Create a new host firmware package.

Assign the host firmware package to the service profile template.

1. Upgrade the firmware on an adapter.2. Enable the firmware on an adapter.

Refer to the exhibit. A blade that is connected to FI-B fails to boot from a SAN LUN. The boot policy is configured to boot by using vHBA1 as the SAN Primary. Which set of actions resolves the issue?A. • Set ESX01_B zone to VSAN 20.• Create a new vHBA and assign VSAN 20.

• vHBA1 to VSAN 20 in Service Profile.• VMware Adapter Policy on vHBA1.

•Apply VMware Adapter Policy on vHBA1•Change vHBA1 to VSAN 20 in Service Profile

• Set ESX01_B zone to VSAN 20.• Change vHBA1 to VSAN 20 in Service Profile

Refer to the exhibit. An engineer performs a POST operation using REST API on the Cisco Nexus switch to retrieve a managed object, but the operation fails. Which configuration resolves the issue?

https://172.16.10.1/api/node/mo/uni/tn-Test1.xml? rsp-subtree=full&rsp-prop-include=configonly

icurl -k-v https:// 172.16.10.1/api/node/mo/uni/tn-Test1.xml? rsp-subtree=modified=config-only

https:/ 172.16.10.1/api/node/mo/uni/tn-Test1.xml? rsp-subtree=modified=config-only

icurl -k -v https://172.16.10.1/api/mo/uni.xml?rsp-subtree=no<fv Tenant name="Test1" />

Refer to the exhibit. The cURL command fails to complete. Which action resolves the problem?

Include -p "password" in the command.

Add -H "X-Auth-Token" to the command.

Change ".json" to ".xml" at the end of the URL.

Refer to the exhibit. A blade that is connected to FI-A fails to boot from a SAN LUN. The boot policy is configured to boot by using vHBA0 as the SAN Primary. Which action resolves the issue?

Configure vHBA_SAN_A zone to VSAN 10

Change Adapter Policy to VMWare on vHBA0

Change vHBA0 to VSAN 11 in Service Profile

Configure vHBA_SAN_A zone to VSAN 10

Refer to the exhibit. A certificate is implemented on the security configuration on the Cisco ACI controller. A customer receives a "Connection Not Secure" error in a browser every time the customer logs in to the Cisco APIC GUI. Which action resolves the issue?

Use a browser that supports keys of 2048 bits.

Include a private key with the certificate.

Use a browser that supports keys of 2048 bits.

Configure a corporate certificate authority for the certificate.

Add a 1536-bit key to the APIC GUI.

Refer to the exhibit. The scheduler job fails to run. Which action resolves the issue?

Configure the authentication credentials.

Change the TFTP server address.

Configure the RBAC authentication.

Refer to the exhibit A network administrator must provide Bash shell access to the support team for all of the Cisco Nexus 9000 Series Switches. The newly created user that is named "bashusers" fails to access the Bash shell. Which action resolves the issue?

Associate bashusers with the Cisco NX-OS dev-ops role and activate the bash-shell feature.

Associate bashusers with the Cisco NX-OS vdc-admin role and activate the nxapi feature.

Associate bashusers with the Cisco NX-OS dev-ops role and activate the bash-shell feature.

Associate bashusers with the Cisco NX-OS network-admin role and activate the guestshell feature.

Associate bashusers with the Cisco NX-OS network-operator role and activate the bash-shell feature.

Refer to the exhibit. The OTV overlay is deployed in multicast mode. After an unexpected reload of N7K-SITE1-OTV1, the network administrator observed that on N7K-SITE1-OTV2 the OTV site adjacency went into the partial state. Which action resolves the issue?

Enable IP IGMP version 3 on the join interface on N7K-SITE1-OTV1.

Configure the Site-Identifier on N7K-SITE1-OTV1 to 0002.0002.0002.

Enable IP IGMP version 3 on the join interface on N7K-SITE1-OTV1.

Change the Site-VLAN on N7K-SITE1-OTV2 to VLAN 1.

Modify the multicast data-group on N7K-SITE1-OTV1 to match N7K-SITE1-OTV2.

An FSM failed during an uparade with the auto-install feature enabled. The engineer must remove the service pack from the subordinate fabric interconnect (FI) to recover the Fls. Which set of commands resolves the issue?A. UCS-A# scope orgUCS-A/org # scope fw-infra-pack defaultUCS-A /org/fw-infra-pack # set infra-bundle-version ""UCS-A/org/fw-infra-pack* # commit-buffer

UCS-A# scope fabric-interconnect bUCS-A# /fabric-interconnect # remove service-packUCS-A# /fabric-interconnect* # commit-buffer

UCS-A# scope orgUCS-A/org # scope fw-infra-pack defaultUCS-A /org/fw-infra-pack # set infra-bundle-versionUCS-A# /fabric-interconnect # remove service-pack securityUCS-A# /fabric-interconnect* # commit-buffer

UCS-A# scope fabric-interconnect bUCS-A# /fabric-interconnect # remove service-pack securityUCS-A# /fabric-interconnect* # commit-buffer

Refer to the exhibit. A recent configuration change removes the HSRP adjacency between the SW-1 and SW-2 Cisco Nexus switches. The change causes the servers on this subnet to lose Internet access. Which action restores the connectivity of all servers on VLAN 13?

Disable HSRP IP redirects on SW-1.

Set the HSRP priority to 70 on SW-1.

Refer to the exhibit. A network engineer configures OSPF protocol between two Cisco Nexus 7000 Series Switches. The OSPF neighbors fail to synchronize OSPF databases. Which action resolves the issue?

Set the same MTU values on both sides of the link.

Match the OSPF area between the two devices.

Configure the IP addresses of the interface in the same subnet.

Change the OSPF area type to 2 on n7k-1.

Set the same MTU values on both sides of the link.

Refer to the exhibit. A network engineer is implementing a pair of Cisco Nexus 9000 Series Switches. During the OSPF configuration, the engineer discovers unstable routing in the network. The investigation shows flapping routes after the new switches were introduced. Which set of actions resolves the issue?

Configure a new IP address on the Ethernet interface toward the OSPF neighbor. Clear the OSPF neighbor.

Configure a new IP address on the Ethernet interface toward the OSPF neighbor. Clear the OSPF process.

Configure a new OSPF priority on the Ethernet interface toward the OSPF neighbor. Clear the OSPF neighbor.

Configure a new IP address on the Loopback interface for the OSPF process. Clear the OSPF process

Refer to the exhibit. A network engineer needs to capture traffic from the VMs that utilize the IOM host interface Eth1/1/23 of a Cisco UCS B-Series chassis. A traffic analyzer is used to get traffic captured from the Eth1/4 interface of the subordinate fabric interconnect. The network engineer notices that traffic is not captured on the traffic analyzer. Which action resolves the issue?

Span the traffic from the Eth 1/4 of the primary fabric interconnect.

Span the traffic from the Eth 1/2 of the subordinate fabric interconnect.

Span the traffic from the Eth 1/4 of the subordinate fabric interconnect.

Span the traffic from the Eth 1/2 of the primary fabric interconnect.

Span the traffic from the Eth 1/4 of the primary fabric interconnect.

Refer to the exhibit. An engineer must save the running configuration to startup-config and generate a syslog message indicating that the configuration was modified, but an error was received. Which action resolves the issue?

Add event-default as a second action of the EEM script.

Change the syslog action number to 1.

Save the configuration using a user with network-admin role.

Use the extended command copy running-config startup-config.

Add event-default as a second action of the EEM script.

A network engineer must connect a Cisco UCS Fabric Interconnect cluster to the Cisco ACI. VMware ESXi hypervisors have been installed on Cisco UCS blades and a VMware VMM domain has been configured. However, virtual machines fail to reach their default gateway in the Cisco ACI Fabric. The engineer investigates the issue and notices that the VMware Distributed Switch (VDS) teaming policy is set to "Route based on IP hash". Which action resolves the issue?

Configure the vSwitch Policy on the VMM domain.

Disable the On-demand EPG resolution immediacy setting in ACI.

Disable the VMware Network I/O Control on the VDS.

Configure the vSwitch Policy on a VDS.

Refer to the exhibit. An administrator directly connects a Fibre Channel storage array to ports 1 through 4 on a Cisco UCS 6454 Fabric Interconnect. The administrator configures a service profile to boot directly from the new Fibre Channel storage array, but the service profile fails to boot. When the administrator checks the output of the show flogi database command on the fabric interconnect, it shows the output presented in the exhibit. Which action resolves the issue?

Configure the fabric interconnects in Fibre Channel switch mode.

Configure the Zoning Type in vHBA Initiator Group as Multiple Initiator Single Target.

Configure the fabric interconnects in Fibre Channel switch mode.

Configure the Zoning Type in vHBA Initiator Group as Multiple Initiator Multiple Target.

Configure the fabric interconnects in Fibre Channel end-host mode

Refer to the exhibit. A network engineer notices packet drops on FCoE traffic from the servers. Which action resolves the issue?

Enable priority flow control on the interface.

Apply flowcontrol receive on the interface.

Apply flowcontrol transmit on the interface.

Enable priority flow control on the interface.

Disable priority flow control on the interface.

Refer to the exhibit. Refer to the exhibit. customer reports that all Intra-EPG isolation stopped working within a baremetal tenant. Postman is running on a machine to get information from the APIC in case of orchestration failure. Which action resolves the issue?.

Remove primaryEncap="vlan-110" from the specific port path.

Match encap="vlan-10" and primaryEncap="vlan-110"

Modify the GET command to reference the valid path for the managed object

Change pcEnfPref="unenforced" to pcEnfPref="enforced".

Refer to the exhibit. Refer to the exhibit. During a maintenance window of the Nexus switch pair, one of the Cisco Nexus chassis was brought offline for maintenance. The primary Cisco Nexus switch was stable during the maintenance window. After finishing the tasks on the chassis, the administrator wanted to bring the second switch online. The administrator checked the status of the disconnected switch that was removed from the vPC during the maintenance. The engineer must connect the peer chassis seamlessly with the primary vPC peer without experiencing traffic interruption. Which action accomplishes this goal?

Change the auto timer to a higher value, then connect the peer switch.

Change the role priority, then connect the peer switch.

Change the auto recovery to disabled, and enable auto recovery.

Change the auto recovery timer to active if not already set, then re-establish the connectivity.

Change the auto timer to a higher value, then connect the peer switch.

Refer to the exhibit. Refer to the exhibit. The monitoring team reports an inability to access the devices after a new centralized management integration. Which action resolves the issue?

Modifly the SNMP ACL to allow the incoming request packets.

Enable SHA authentication for the admin user.

Change the admin user permissions to write.

Refer to the exhibit. Refer to the exhibit. The administrator set up two pairs of Cisco Nexus switches. The administrator set dfferent vPC priorities on all four Nexus switches. As soon as the administrator activates the vPC between the two pairs the network faces different issues. The problems range from both Nexus pairs declare themselves as root bridge, as well as spanning-tree inconsistencies and traffic forwarding issues. Which action resolves these issues?

Change domain ID on one pair to a diferent ID.

Change the role priority on one pair.

Configure peer-config-check-bypass on both pairs.

Configure a vPC peer link between both peers.

Change domain ID on one pair to a diferent ID.

Refer to the exhibit. Refer to the exhibit. The expected routes are not being leaked as expected from VRF RED to VRF BLUE. Which action resolves the issue?

Set the community to 65000:65000 under the route map.

Include the "le 32" knob under the RED_TO_BLUE_ACL prefix list.

Change the route targets under the VRFs.

Configure VRF BLUE under the BGP configuration.

Set the community to 65000:65000 under the route map.

Refer to the exhibit. Refer to the exhibit. UCS- 1 fails to connect to the storage array. Which action resolves the issue?

Enable N9K-1 mode to N-Port ID Virtualization.

Set the FI-A mode to FC End Host mode.

Enable N9K-1 mode to N-Port ID Virtualization.

Configure N-Port ID Virtualization on FI-A.

Implement N-Port Mirtualization on N9K-1.

A Cisco uCs C-Series Server powers off due to a power outage. The server should turn on when the power is restored with a fixed delay of 3 minutes. However, it remained powered off for more than 3 minutes after the engineer powered it back online. Which two actions resolve the issue (Choose two.)

Configure the power-restore-policy.

Configure the power restore last-state policy.

Set the delay fixed value to 3.

Refer to the exhibit. Refer to the exhibit The EEM applet must generate a syslog message whena BGP adjacency faps. This message must be displayed to the console of the switch. However, when a BGP adjacency failure is simulated, no syslog message is displayed. Which action resolves the issue?

Add the event-default action statement.

Modify the policy to use the snmp trap action.

Adjust the policy to match an SNMP OID.

Set the logging priority to Wamings.

Refer to the exhibit Refer to the exhibit. To avoid service disruption, an engineer must move the_ server from LEAF_ 1 to LEAF_ _2. After running the test, the engineer noticed that L EAF_ 2 failed to forward network traffic into the VXL AN fabric. The BGP, interface NVE, and VNI were confirmed to be configured as expected. Which two actions must be taken on L EAF_ 2 to resolve the issue? (Choose two.)

Change the fabric forwarding anycast-gateway-mac MAC address.

Enable HMM tracking to advertise host routes into the VXL AN fabric.

Change the fabric forwarding anycast-gateway-mac MAC address.

Add fabric forwarding mode anycast-gateway on interface Vlan100.

Configure correspondent IP addressing on every interface.

Remove ip forward from interface VIan30 and add it on interface Vlan100.

Enable HMM tracking to advertise host routes into the VXL AN fabric.

An engineer upgrades Cisco UCS firmware from release 3. 1(2) to release 3. 1(3) using Autolnstall.Both fabric interconnects go ofline during the software upgrade installation and issue multiple F SM retries in the DeployPollActivate stage. Which set of actions resolves the issue?

Clear the startup version of the default infrastructure and server pack. Remove the service pack from the subordinate node. Upgrade with the Force attribute through Autolnstall.

Fix the rights to 666 with the debug plugin on the primary fabric interconnet Save the current configuration on the running fabric interconnect. Continue the upgrade on both fabric interconnects.

Enable the management interface monitoring policy on the fabric interconnects. Initiate a configuration backup on both fabric interconnects. Commit the pending fabric interconnect reboot activity.

Acknowledge the error and reboot the primary fabric interconnect. Clear the default firmware version and upload a new one. Restart the upgrade process manually.

Clear the startup version of the default infrastructure and server pack. Remove the service pack from the subordinate node. Upgrade with the Force attribute through Autolnstall.