What are two requirements when planning a Cisco HyperFlex All Flash standard cluster installation using three HX240c M5 servers? (Choose Two)

If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames must also be enabled on the upstream switches.

The servers must be discovered, unassociated, and connected to each fabric interconnect.

If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames do not have to be enabled on the upstream switches.

The hypervisors must be installed to Cisco FlexFlash SD cards.

If the Jumbo MTU option in the HyperFlex installer is enabled, then jumbo frames must also be enabled on the upstream switches.

The cluster deployment type must support a mix of HDD and SSD.

The servers must be discovered, unassociated, and connected to each fabric interconnect.

An engineer must implement a Cisco UCS system at a customer site. One of the requirements is to implement SAN boot. The storage system maps the source WWPN to a unique LUN. Which method does Cisco recommend to configure the SAN boot?

Create a SAN boot policy in which every initiator is mapped to a different target LUN.

Create a SAN boot policy in which every initiator is mapped to the same target LUN.

Define the vHBAs as bootable and leave the default values on the target definition.

Define the vHBAs as bootable and leave the boot target definition empty.

Create a SAN boot policy in which every initiator is mapped to a different target LUN.

Refer to the exhibit. An engineer must distribute all the host ports to use all eight configured FEX uplinks. The solution must minimize disruption if an uplink fails Which action accomplishes this objective?

Set the pinning max-links value to 8

Statically assign each host interface to a fabric uplink

Configure the eight uplinks in a port channel

An engineer is implementing Cisco Intersight in a secure environment. The environment must use LDAP directory service and ensure information integrity and confidentiality. Which two steps must be taken to implement the solution? (Choose two.)

Add a trusted root LDAP certificate to Cisco Intersight

Add a self-signed LDAP certificate to Cisco Intersight.

Enable Certificate Signing Request in Cisco Intersight.

Add a trusted root LDAP certificate to Cisco Intersight

Add a trusted OAuth token to Cisco Intersight

Port security is statically configured on a Cisco Nexus 7700 Series switch and F3 line card. The switch is configured with an Advanced Services license. Which two actions delete secured MAC addresses from the interface? (Choose Two)

The address must be removed from the configuration.

The address must reach the age limit that is configured for the interface.

The address must be removed from the configuration.

The address must reach the age limit that is configured for the interface.

The interface must be converted to a routed port.

The device must be restarted manually.

Shutdown and then no shutdown must be run on the interface.

A network engineer repeatedly saves a configuration on Catalyst switches to NVRAM using the write memory command. What action should be taken to implement the same action on Nexus switches?

Use the wri command to use the copy running-config startup-config command.

Use the write memory command to save the configuration.

Use the alias command to use the write memory command.

Use the exit command to leave the configuration mode and save the configuration automatically.

Use the wri command to use the copy running-config startup-config command.

Refer to the exhibit. A network engineer requires remote access via SSH to a Cisco MDS 9000 Series Switch. The solution must support secure access using the local user database when the RADIUS servers are unreachable from the switches. Which command meets these requirements?

aaa authentication login default fallback error local

aaa authentication login default group radius

aaa authentication login default group local

aaa authentication login default fallback error local

An engineer must start a software upgrade on a Cisco Nexus 5000 Series Switch during a zone merge. What is the result of this action?

The zone merge pauses until the upgrade completes

The zone merge executes and then the upgrade completes.

What are two types of FC/FCoE oversubscription ratios? (Choose two.)

port bandwidth to uplink bandwidth

host bandwidth to storage bandwidth

server storage to end-node count

port bandwidth to uplink bandwidth

edge ISL bandwidth to core ISL bandwidth

host bandwidth to storage bandwidth

switch processing power to end-node processing power

Due to a domain name change at a customer site, a Cisco UCS cluster must be renamed. An engineer must recommend a solution to ensure that the Cisco UCS Manager is available over HTTPS. Which action accomplishes this goal?

Generate a new default key ring certificate from the Cisco UCS Manager

Reinstall the cluster to generate the default key ring certificate

Generate a new default key ring certificate from the Cisco UCS Manager

Reboot the SSO component of the Cisco UCS Manager

Regenerate the default key ring certificate manually

Which configuration generates a syslog message when CPU utilization is higher than 60%?

event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op gt 60 poll-interval 5 action 1.0 syslog priority notifications msg 'cpu high'

event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type exact entry-op lt 60 poll-interval 5 action 1.0 syslog priority notifications msg 'cpu high'

event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type next entry-op gt 60 poll-interval 5 action 1.0 syslog priority notifications msg 'cpu high'

event manager applet HIGH-CPU event snmp oid 1.3.6.1.4.1.9.9.109.1.1.1.1.6.1 get-type next entry-op lt 60 poll-interval 5 action 1.0 syslog priority notifications msg 'cpu high'

A host EPG Client wants to talk to a webserver in EGP Web. A contract with default settings is defined between EPG Client and EPG Web, which allows TCP communication initiated by the client toward the webserver with TCP destination port 80. Which statement is true?

The host in EPG Client is allowed to connect to TCP destination port 80 on the webserver in EPG Web. The webserver will not be allowed to initiate a separate TCP connection to a host port with TCP source port 80.

If EPG Web is made a preferred group member, a contract between EPG Client and EPG Web is no longer required for the host in EPG Client to reach the webserver in EPG Web.

If vzAny is configured to consume and provide a 'deny all' contract, traffic between EPG Client and EPG Web is no longer allowed.

The host in EPG Client is allowed to connect to TCP destination port 80 on the webserver in EPG Web. The webserver will not be allowed to initiate a separate TCP connection to a host port with TCP source port 80.

The host in EPG Client is allowed to connect to TCP destination port 80 on the webserver in EPG Web. The webserver is allowed to initiate a separate TCP connection to a host port with TCP source port 80.

An engineer is enabling port security on a Cisco MDS 9000 Series Switch. Which feature of enabling port security on a Cisco MDS 9000 Series Switch must be considered?

It authorizes only the configured sWWN to participate in the fabric.

It always learns about switches that are logging in.

It can be distributed by using Cisco Fabric services.

It authorizes only the configured sWWN to participate in the fabric.

It binds the fabric at the switch level.

Cisco 350-601 Practice Test 2 - Free Online Exam Prep & Questions

Which two firmware packages are included in the Cisco UCS C-Series Rack-Mount UCS-Managed Server Software bundle? (Choose two.)

A.

system

B.

third-party

C.

PSU

D.

CIMC

E.

BIOS

Cisco 350-601 Practice Test 2

Question

Cisco 350-601 Practice Tests

Practice Tests