Cisco 350-601 Practice Test - Questions Answers, Page 46
Question list
List of questions
Related questions
An engineer must create a new Cisco UCS user account to perform these actions:
* Modify systems logs, faults, and power management settings.
* View access to all other configuration in the UCS domain.
Which two roles must be assigned to the user to permit these actions? (Choose two.)
Server Compute
Read-Only
Operations
Facility Manager
Administrator
Refer to the exhibit. A source is sending a multicast traffic stream to the receiver. How is the multicast traffic expected to flow through the network when it reaches a vPC peer?
* The multicast traffic is not replicated to the ports that joined a multicast group (224.0.0.13) or the peer link. * The multicast traffic stream flows over the vPC link to ensure that orphan ports get the multicast stream in failure scenarios.
* The multicast traffic is replicated to the ports that joined a given multicast group and the peer link. * The multicast traffic stream flows from Agg-1 to Agg-2 over the M1-to-M2 peer link and forwards the traffic over Layer 4 to Access-2.
* The multicast traffic is replicated to the ports that joined a given multicast group and the peer link. * The multicast traffic stream flows over the peer link to ensure that orphan ports receive the multicast stream in failure scenarios.
* The multicast traffic is not replicated to the ports that joined a multicast group (224.0.0.13) or the peer link. * The multicast traffic stream flows from Agg-1 to Agg-2 over the M1-to-M2 peer link and forwards the traffic over Layer 4 to Access-2.
DRAG DROP
Drag and drop the Hyperflex characteristics from the left onto the appropriate Hyper Hex node types on the right.
DRAG DROP
Refer to the exhibit.
The server is sending traffic to the storage server using Fiber Channel protocol. The requirement is for the N5K-1 to forward traffic to MDS9k-1. Drag and drop the configuration steps from the right to complete the configuration for N5K-1 on the left. Not all configuration steps are used.
DRAG DROP
Refer to the exhibit.
Refer to the exhibit An engineer must provision a VXLAN deployment The OSPF has already been configured as the underlay protocol All BGP configurations will be performed using the template method The deployment must meet these requirements The local update source for leaf switches must be loopback 1 The router ID must be the local loopback IP address The external BGP connections must use a template name Drag and drop the configuration snippets from the bottom to complete the configuration
Refer to the exhibit.
An engineer runs a Python script from a newly enabled guest shell on a Cisco Nexus 93108 Series Switch. The script needs an additional package called 'Markdown' installed from the Python package manager. Which set of tasks must the engineer perform to install the required package?
Set the NAMESERVER variable in /etc/sysconfig/network. Clone the Markdown repository with the git clone command.
Add nameserver configuration to /etc/resolv.conf. Run sudo chvrf management pip install Markdown.
Enable ip domain-lookup in startup-config. Enter python install Markdown as root.
Configure ip name-server in configuration mode. Execute sudo yum -y install Markdown.
Refer to the exhibit.
An engineer is configuring Cisco Data Center Network Manager to automate the provisioning of Cisco Nexus 9000 Series Switches. The engineer must configure user access for network engineers to permit device operations in Interface Manager. The solution must hide Admin and Config Menu items in Interface Manager. Which two roles must be assigned to the network engineers to meet these requirements? (Choose two.)
network-admin
global-admin
access-admin
network-operator
san-admin
Refer to the exhibit. An engineer is performing a Cisco Nexus 3000 Series Switch configuration backup with a TFTP server that is reachable in the global routing table. Which action completes the scheduler configuration?
Use the default VRF for the scheduler job.
Configure the scheduler authentication password.
Define the scheduler start time as required.
Make the size of the job output lower than the size of the log file.
Refer to the exhibit.
An engineer configures FCoE in a newly installed data center. Which configuration must be applied to activate VSAN 100 on VFC100?
Map an FCoE VLAN to VSAN 100.
Allow VSAN 100 on interface eth1/12.
Issue the shutdown Ian command on VFC 100.
Configure a VLAN on VFC 100.
An engineer is designing a cloud solution for an organization. The security requirements mandate that the cloud must be hosted in a local data center but leverage the remote data center for remote backups. Additionally, the workloads in the data center must be scaled out to a known cloud provider in the future. Which cloud deployment model must be used to meet these requirements?
public cloud
hybrid cloud
private cloud
edge cloud
Question