Cisco 350-601 Practice Test - Questions Answers, Page 6

On Nexus switches, the equivalent command to save the configuration to NVRAM is 'copy running-config startup-config'. The 'write memory' command is specific to Catalyst switches and is not used on Nexus switches.

https://community.cisco.com/t5/switching/write-command-on-nexus-switchs/td-p/1958386

The data interchange format presented in the output is JSON (JavaScript Object Notation), which is commonly used for transmitting data in web applications and for configuration files. It is easily readable both by humans and machines.

For detailed explanations and references, it's best to consult the official Cisco documentation or the Cisco Data Center Core Technologies study guide.

The command 'aaa authentication login default fallback error local' is used to ensure that if RADIUS servers are unreachable, the system will fall back to using the local user database for SSH access to the Cisco MDS 9000 Series Switch.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/mds9000/sw/6_2/configuration/guides/security/nx-os/sec_cli_6-x/cradtac1.html

The configuration that applies the changes for module 1 only, setting the Generic Online Diagnostics policy for a PortLoopback test to error disable the port after 5 consecutive failures, would be Option C based on the provided options.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus7000/sw/system-management/guide/b_Cisco_Nexus_7000_Series_NX-OS_System_Management_Configuration_Guide-RI/configuring_online_diagnostics.html

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus9000/sw/93x/system-management/bcisco-nexus-9000-series-nx-os-system-management-configuration-guide-93x/b-cisco-nexus-9000-seriesnx-os-system-management-configuration-guide-93x_chapter_011010.html

https://www.ciscolive.com/c/dam/r/ciscolive/us/docs/2017/pdf/BRKDCN-3234.pdf

Starting a software upgrade on a Cisco Nexus 5000 Series Switch during a zone merge will result in the zone merge process stopping. This is to prevent any conflicts or issues that may arise from performing two significant operations simultaneously.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5500/sw/upgrade/602_N2_2/n5500_upgrade_downgrade_602_n2_2.html

To configure HSRP on a Nexus 7000 series switch for VLAN 100 and ensure the router is the active master, you would typically use thehsrpcommand within the VLAN configuration mode, set the priority higher than the default to make it the preferred active router, and use thepreemptcommand to allow the router to take over as the active router if it has a higher priority.

https://www.google.com/search?q=hsrp+priority&oq=hsrp+priority&aqs=chrome..69i57j0l2j0i20i263i395j0i395l6.5307j1j4&sourceid=chrome&ie=UTF-8

When configuring a vHBA template in UCS Manager, you need to specify the WWPN (World Wide Port Name) from a WWPN pool (B) to uniquely identify the port in the fabric, and the Fabric ID (E) to define the path through which the SAN traffic will flow.

https://www.cisco.com/c/en/us/products/collateral/servers-unified-computing/ucs-manager/whitepaper_c11-697337.html

he Python code provided suggests that it is reading a JSON file and storing its contents in a variable. JSON files are typically represented as dictionaries in Python, so the resulting data structure would be a Dictionary

To configure a SPAN session on a Cisco Nexus 5600 Series Switch that monitors ingress traffic on interface Ethernet 1/3 without impacting the traffic analyzer on Ethernet 1/5, you would typically use themonitor sessioncommand to create a new session, specify the source interface with thesourcekeyword, and the destination interface with thedestinationkeyword. Additionally, you would apply a rate limit to the session to adhere to the traffic budget of 1 Gbps.

https://www.cisco.com/c/en/us/td/docs/switches/datacenter/nexus5600/sw/system_management/7x/

b_5600_System_Mgmt_Config_7x/configuring_span.html