Refer to the exhibit. An engineer verifies the configured of an MGCP gateway. The commands are already configured.Which command is necessary to enable MGCP?

Device(config)# ccm-manager enable

Device (config) # com-manager active

What are two key features of the Expressway series? (Choose two.)

Device registration over the internet

VPN connect toward the internal UC resources

Device registration over the internet

An engineer is configuring a Cisco Unified Border Element to allow the video endpoints to negotiate without the Cisco Unified Border Element interfering in the process. What should the engineer configure on the Cisco Unified BorderElement to support this process?

Configure codec transparent on the dial peers.

Configure path-thru content sdp on the voice service.

Configure a hardcoded codec on the dial peers.

Configure a transcoder for video protocols.

Configure codec transparent on the dial peers.

What is the function of the Cisco Unity Connection Call Handler?

routes calls to a user based on caller input

searches a list of extensions until the call is answered

allows customized scripts for IVR capabilities

A company deploys centralized cisco UCM architecture for a hub location and two remote sites.The company has only one ITSP connection at the hub connection, and ITSP supports only G.711 calls Remote site A has a 1-Gbps fiber connection to the hub connection and calls to and from remote side A use G.711 codec Remote site B has a 1 T1 connection to the hub location and calls to and from remote site B use

configure the hardware transcoder on the site A router.

729 codecBased on the provided guidance, a Cisco voice engineer must design media resource management for the customer. What is the method that needs to be followed?

configure the hardware transcoder on the site B router.

configure the hardware transcoder on the site A router.

configure the hardware transcoder on the hub location router.

configure the software transcoder on Cisco UCM to support voice calls to and from both remote sites.

What happens to voice packets from a Cisco 8845 IP phone in the QoS trust boundary?

Cisco UCM determines how the voice packets are classified.

The voice packets are not trusted, and the access layer switch reclassifies the packets.

The voice packets are classified by the phone, and the classification is accepted.

The phone and access layer switch negotiate the classification of packets.

Cisco UCM determines how the voice packets are classified.

How is bandwidth allocated to traffic flows in a flow-based WFQ solution?

Each type of traffic flow has equal bandwidth.

Bandwidth is divided among traffic flows. Voice has priority.

Voice has priority and the other types of traffic share the remaining bandwidth

All the bandwidth is divided based on the QoS marking of the packets.

Which task is required when configuring self-provisioning for an end user in Cisco UCM?

Associate the end user to the Standard CCM Super Users group.

Associate the end user to a SIP Profile.

Which action enables Cisco MRA?

Clients such as Cisco Jabber can use call control on Cisco UCM.

Cisco UCC Express clients can obtain VPN connectivity to Cisco UCC Enterprise.

VPN connectivity can be established to Cisco UCM.

Clients such as Cisco Jabber can use call control on Cisco UCM.

Internal SIP clients registered to Cisco UCM can call external companies

End users report bad video quality and voice choppiness on Cisco Collaboration endpoints. The engineer changed the device pool the users were in but did not correct the problem. Which action should be taken to troubleshoot this issue?

Set the service parameter Use Video Bandwidth Pool for Immersive Video Calls to "false".

Check for duplex/speed mismatches between the network port settings of the system and network switch.

Restart the Cisco Location Bandwidth Manager service on the Cisco UCM publisher.

Use direct IP address calls between two endpoints to troubleshoot call quality issues.

Refer to the exhibit. What is the result of applying these two rules to a voice translation-profile for use with an ISDT1 PRI on a Cisco Voice gateway?

The ISDN Type is modified to the administrators defined value.

The ISDN Plan is modified to the administrators defined value.

The leading Plus is stripped from the numeric phone number.

Any Zero is stripped from the numeric phone number.

An administrator would like to set several Cisco Jabber configuration parameters to only apply to mobile clients (iOS and Android). How does the administrator accomplish this with Cisco Jabber 12.9 and Cisco UCM 12.5?

Assign the desired configuration file to "Mobile" Jabber Client Configuration in the Service Profile.

Deploy jabber-config-user.xml on iOS and Android devices.

Upload the jabber-config.enc file to TFTP

Create a user profile in Jabber Policies.

What is a QoS requirement for VoIP calls?

= 150 ms of one-way latency from mouth to ear

= 150 bps per phone of guaranteed bandwidth

A customer wants to deploy Cisco Jabber Phone Mode with contacts. Which two configurations are needed to accomplish this goal? (Choose two)

Disable Instant Messaging on IM and Presence.

Enable Cisco UCM end-users for IM and Presence.

Add the Application Client Users role to the Cisco UCM end users.

Remove the IM and Presence servers from the Cisco UCM service profile.

Disable Instant Messaging on IM and Presence.

Import Contacts.xml into Jabber.

Enable Cisco UCM end-users for IM and Presence.

Refer to the Exhibit. Which command is required to allow this media resource to handle Video Media streams?

associate application Cisco Unified Border Element

Refer to the exhibit. Calls to Cisco Unity Connection are failing across Cisco Unified Border Element when callers try to select a menu prompt. Why is this happening and how is it fixed?

Cisco Unified Border Element is not sending any support for DTMF. DTMF configuration must be added to the appropriate dial peer.

The Cisco Unity Connection Call Handler is configured for a -Release to Switch" transfer type.Transfers must be disabled for the Cisco Unity Connection Call Handler.

Cisco Unity Connection is configured on G.729 only. Cisco Unity Connection must be reconfigured to support iLBC.

Cisco Unified Border Element is sending the incorrect media IP address. The IP address of the loopback interface must be advertised in the SDP.

Which datastore and protocol is used for saving back-up files within the Disaster Recovery System of Cisco UCM?

local disk on the Cisco UCM server

An engineer troubleshoots a Cisco Jabber login problem on a Windows PC in the corporate network.The login fails with the error message "Cannot find your services automatically. Click advanced settings to set up manually.'' Which action should the engineer take first?

Perform a manual DNS lookup of SRV record _cisco-uds.tcp.domain.com.

Verify the username and password and try again

Verify whether the cup-xmpp certificates are valid.

Perform a manual DNS lookup of SRV record _collab-edge._tls.domain.com.

Perform a manual DNS lookup of SRV record _cisco-uds.tcp.domain.com.

Refer to the exhibit. An administrator is attempting to register a SIP phone to a Cisco UCM but the registration is failing.The IP address of the SIP Phone is 10.117.34 222 and the IP 1 address of the Cisco UCM is 10.0.101.10. Pings from the SIP phone to the Cisco UCM are successful. What is the cause of this issue and how should it be resolved?

An network device is blocking TCP port 5060 from the SIP phone to the Cisco UCM. This device must be reconfigured to allow traffic from the IP phone.

The certificates on the SIP phone are not trusted by the Cisco UCM. The SIP phone must generate new certificates.

DNS lookup for the Cisco UCM FQDN is failing. The SIP phone must be reconfigured with the proper DNS server.

An NTP mismatch is preventing connection of the TCP session between the SIP phone and the Cisco UCM. The SIP phone and Cisco UCM must be set with identical NTP sources.

An network device is blocking TCP port 5060 from the SIP phone to the Cisco UCM. This device must be reconfigured to allow traffic from the IP phone.

Which two steps should be taken to provision after the Self-Provisioning feature was configured for end users?

Dial the self-provisioning IVR extension and associate the phone to an end user.

Plug the phone into the network.

Dial the self-provisioning IVR extension and associate the phone to an end user.

Plug the phone into the network.

Ask the Cisco UCM administrator to associate the phone to an end user.

Enter settings menu on the phone and press *,*,# (star, star, pound).

Dial the hunt pilot extension and associate the phone to an end user.

On a cisco catalyst switch which command is required to send CDP packets on a switch port that configures a cisco IP phone to transmit voice traffic in 802.1q frames tagged with the voice VLAN ID 221?

Device(config-if)# switchport voice vlan 221

Device(config-if)# switchport access vlan 221

Device(config-if)# switchport trunk allowed vlan 221

Device(config-if)# switchport vlan voice 221

Device(config-if)# switchport voice vlan 221

Cisco 350-801 Practice Test 4 - Free Online Exam Prep & Questions

Home / Cisco / 350-801 / Practice Test 4

Ask Question

00:00:00

Show Answer

Training mode

Report Issue

Restart test

Question 1 / 40

Refer to the exhibit.

Cisco 350-801 image Question 121 117973 10102024233110000000

A customer submits this output, captured on a Cisco IOS router. Assuming that an MGCP gateway is configured with a ISDN BRI interface, which BRI changes resolve the issue?

Cisco 350-801 image Question 121 Answer 1 117973 10102024233110000000

Cisco 350-801 image Question 121 Answer 2 117973 10102024233110000000

Cisco 350-801 image Question 121 Answer 3 117973 10102024233110000000

Cisco 350-801 image Question 121 Answer 4 117973 10102024233110000000

Comment (0)

Cisco 350-801 Practice Test 4

Question

Cisco 350-801 Practice Tests

Practice Tests