Which component is upgraded when using the SDDC Manager management domain upgrade workflow in VMware Cloud Foundation?

VMware vRealize Network Insight

Which three requirements are needed to provision an additional cluster within VMware Cloud Foundation? (Choose three.)

Minimum of three hosts using vSAN as a principal storage

Valid license specified in SDDC Manager

Minimum of three hosts using NFS, VMFS on FC, or vVols as a principal storage

Minimum of three hosts using vSAN as a principal storage

Valid license specified in SDDC Manager

All hosts in maintenance mode with no patches applied

Minimum of three hosts using NFS, VMFS on FC, or vVols as a principal storage

A new vCenter license to accommodate the additional cluster

Minimum of five hosts for any type of principal storage

An administrator is tasked with replacing the default, self-signed certificates in a VMware Cloud Foundation environment.The administrator begins by completing the three tasks which must be executed to prepare a Microsoft Active Directory Certificate Services authority to integrate with VMware Cloud Foundation.Which three tasks were executed by the administrator? (Choose three.)

Assign the ''Issue and Manage Certificates'' permission to the SDDC Manager service account.

Create a new template that supports Server Authentication and proof of origin.

Enable Basic authentication for Certificate Services.

Join the vCenter server instances to the Active Directory domain.

Modify the ''Web Server'' template to include User Authentication.

Enable Active Directory authentication for Certificate Services.

Assign the ''Issue and Manage Certificates'' permission to the SDDC Manager service account.

Create a new template that supports Server Authentication and proof of origin.

Enable Basic authentication for Certificate Services.

Which type of IP subnets are required when enabling Workload Management in VMware Cloud Foundation?

Non-routable subnets for pod networking and Service IP addresses, routable subnets for ingress and egress

Routable subnets for pod networking, Service IP addresses, ingress and egress

Routable subnets for pod networking and Service IP addresses, non-routable subnets for ingress and egress

Non-routable subnets for pod networking, Service IP addresses, ingress and egress

An administrator is creating a VI Workload Domain where NSX-T must be configured to allow for dynamic routing.Which pre-requisites are required?

Two BGP peers on ToR switches with an interface IP and BGP Autonomous System Number

Two MPLS peers on ToR switches with an interface IP and an iBGP Autonomous System Number

Two BGP peers on ToR switches with an interface IP and BGP Autonomous System Number

Separate VLANs and subnets available for NSX-T Host Overlay TEP VLAN and NSX-T Edge Overlay TEP VLAN

Reserved BGP Autonomous System Number to use for the NSX-T Edge cluster's Tier-0 gateway

An administrator wants to scale an existing VMware Cloud Foundation (VCF) environment by adding a new VI Workload Domain. Which two storage options can be used for the new VI Workload Domain? (Choose two.)

vSAN principal storage with VMFS on FC supplemental storage

vSAN principal storage with NFS supplemental storage

iSCSI principal storage with SMB supplemental storage

vSAN principal storage with VMFS on FC supplemental storage

vSAN principal storage with SMB supplemental storage

vSAN principal storage with NFS supplemental storage

vVOL principal storage with SCSI supplemental storage

An administrator wants to delete a VMware Cloud Foundation Workload Domain and re-use the attached ESXi hosts by returning them to the list of unassigned hosts in the SDDC Manager inventory.Which action needs to be taken to complete this task?

ESXi hosts need to be decommissioned and re-imaged.

ESXi hosts need to be re-imaged and updated.

ESXi hosts need to be decommissioned and re-imaged.

ESXi hosts need to be re-imaged and rejoined.

ESXi hosts need to be decommissioned and updated

VCF design workshops were conducted, and the architect collected the following customer requirements for the newly planned VCF infrastructure:* The new VCF infrastructure must target two zones: DEV/UAT and DMZ.* The security team would like to have full management and network isolation between these two zones* 12 hosts have been ordered for the solution.* DEV/UAT workloads must comply with an erasure coding vSAN storage policy with the ability to tolerate the failure of two hosts.Which workload domain sizing will be required to achieve these requirements?

8-hosts DEV/UAT workload domain, having an 8-hosts DEV/UAT cluster, and a 4-hosts DMZ workload domain, having a 4-hosts DMZ cluster

12-hosts workload domain for both zones, having a 4-hosts DEV cluster a 4-hosts UAT cluster, and a 4-hosts DMZ cluster

12-hosts workload domain for both zones, having an 8-hosts DEV/UAT cluster, and a 4-hosts DMZ cluster

8-hosts DEV/UAT workload domain, having a 4-hosts DEV cluster and a 4-hosts UAT cluster, in addition to a 4-hosts DMZ workload domain, having a 4-hosts DMZ cluster

8-hosts DEV/UAT workload domain, having an 8-hosts DEV/UAT cluster, and a 4-hosts DMZ workload domain, having a 4-hosts DMZ cluster

A VMware administrator is tasked to upgrade a VMware Cloud Foundation (VCF) environment that is running on DellEMC PowerEdge servers.During the ESXi software upgrade for the VI Workload Domain hosts, the administrator receives an error stating that the correct storage driver is not available, although the storage adapters are enabled in the BIOS.Which action should the administrator take to fix this issue?

Use the Dell EMC customized image for the ESXi build in the VCF bill of materials.

Upgrade the storage adapter firmware to the latest version.

Use the image for the ESXi build in the VCF bill of materials.

Upgrade the BIOS firmware to the latest version.

An architect needs to enable the workload management for a VCF VI workload domain and plans on using the minimum requirement for deploying a highly available NSX edge cluster.What is the minimum requirement for this deployment?

A cluster of two large NSX edge nodes

A cluster of three large NSX edge node

A cluster of one large NSX edge node

A cluster of two large NSX edge nodes

A cluster of two small NSX edge nodes

A systems administrator wants to integrate Microsoft Certificate Authority with SDDC Manager and has already established a connection between the components.Which pre-requisite step is required for this integration to work?

Verify that the Microsoft Certificate Authority Server has been configured for basic authentication

Verify that the self-signed certificates have been replaced with signed certificates from Microsoft Certificate Authority.

Verify that a customized certificate template has been configured on the SDDC Manager

Verify that the Microsoft Certificate Authority Server has the RBAC roles configured on the same machine where the Certificate Authority role is installed.

Verify that the Microsoft Certificate Authority Server has been configured for basic authentication

An administrator is tasked with preparing hosts for the deployment of a new Workload Domain in a VMware Cloud Foundation environment. The ESXi hosts have HBA cards that require the installation of a separate and the most recent VMware Installation Bundles (VIBs).Which ESXi imaging method should the administrator use?

Download and burn the base ESXi Installer ISO Image to a DVD

VMware vSphere Lifecycle Manager Images

A customer purchased six new HPE ProLiant DL380 Gen10 hosts and is interested in deploying a VCF infrastructure that will coexist with the current VMware on AWS cloud DR solution in a hybrid model.The architect suggests the VCF architecture that will help the customer run the workloads while offering workload isolation.Which VCF architecture was suggested for this customer?

3-node management domain and 3-node VI workload domain in a VCF standard model

node management domain and 3-node VI workload domain in a VCF standard model, while leveraging resource pools

3-node management domain and 3-node VI workload domain in a VCF standard model

node management/workload domain in a VCF consolidated model, while leveraging resource pools

node management/workload domain in a VCF consolidated model

The architect of a multi-site VMware Cloud Foundation solution is tasked with ensuring that the prerequisites for vSAN data at rest encryption have been achieved. The existing design calls for use of the vSphere Native Key Provider. NSX-T is configured with Federation, and both sites benefit from a stretched TO and T1 network topology.A new security policy requires the use of vSphere Virtual Machine encryption, in addition to the at-rest encryption already configured. During a failover test from Site-A to Site-B using Site Recovery Manager, the virtual machines were unable to power-on.How does the design need to be changed to support the new requirement?

Use a third-party KMS solution that allows for key replication.

Use a third-party KMS solution at each site.

Ensure that a TPM 2.0 certified module is installed on all ESXi hosts at Site-B.

Ensure that the Site Recovery Manager service account has Cryptographer ReadKeyServerslnfo privileges.

An administrator needs to upgrade the current VMware Cloud Foundation (VCF) environment from version 4.1 to 4.3, knowing that the environment has direct access to the internet.Which steps should be performed to download the online bundles?

1. SDDC Manager checks depot.vmware com. 2. The administrator accesses SDDC Manager. 3. The administrator downloads the bundles from SDDC Manager.

1 vSphere Lifecycle Manager checks depot.vmware.com. 2. The administrator accesses vSphere Lifecycle Manager. 3. The administrator downloads the bundles from vSphere Lifecycle Manager.

1 SDDC Manager checks depot.vmware com. 2. The administrator accesses vSphere Lifecycle Manager 3. The administrator downloads the bundles from vSphere Lifecycle Manager

1. vSphere Lifecycle Manager checks depot vmware.com 2. The administrator accesses SDDC Manager. 3. The administrator downloads the bundles from SDDC Manager.

1. SDDC Manager checks depot.vmware com. 2. The administrator accesses SDDC Manager. 3. The administrator downloads the bundles from SDDC Manager.

In which order should the VMware Cloud Foundation components in a Management Domain be upgraded?

SDDC Manager and VMware Cloud Foundation services, vRealize Suite, NSX-T Datacenter, ESXi servers, vCenter Server

vRealize Suite, SDDC Manager and VMware Cloud Foundation services, NSX-T Datacenter, vCenter Server, ESXi servers

SDDC Manager and VMware Cloud Foundation services, vRealize Suite, NSX-T Datacenter, ESXi servers, vCenter Server

SDDC Manager and VMware Cloud Foundation services, vRealize Suite, NSX-T Datacenter, vCenter Server, ESXi servers

SDDC Manager and VMware Cloud Foundation services. NSX-T Datacenter, vCenter Server, ESXi servers, vRealize Suite

Which two use cases would require the creation of multiple clusters in a workload domain? (Choose two.)

Different virtual machine workload types

Different application licensing models

Different virtual machine workload types

Bare-Metal vs. virtual workloads

What limits can an administrator configure on a vSphere Namespace for a VMware Cloud Foundation Developer-Ready Workload Domain?

Tanzu Kubemetes Cluster master nodes

Tanzu Kubernetes Cluster worker nodes

An administrator successfully finished restoring a SDDC Manager and now needs to verify its operation. Which tool should the administrator use for this verification?

Support and Serviceability (SoS) tool

vRealize Operation plugin tool forVCF

Support and Serviceability (SoS) tool

SDDC Manager GUI restore health tool

Ruby vSphere Console VCF check tool

A systems administrator is implementing stretched clusters in an environment with multiple Availability Zones (AZs). Which statement accurately describes this design?

If VLAN is stretched between AZ1 and AZ2, the Layer 3 network must also be stretched between the two AZs.

For VLANs that are stretched between AZs, configure load balancing in the Layer 3 gateway between AZs

Layer 3 networks must be stretched between the AZs by the physical infrastructure

The Layer 3 gateway for the workload domain and Edge overlay networks must be highly available across the AZs.

If VLAN is stretched between AZ1 and AZ2, the Layer 3 network must also be stretched between the two AZs.

An architect is designing overlay networking and routing for two VMware Cloud Foundation VI workload domains The following requirements must be met in the design:* NSX-T Bare Metal Edge nodes are required to satisfy a requirement for extremely low latency.* The costs must be kept to a minimum.Which design meets these customer requirements?

Share an NSX-T Manager cluster between both workload domains, and then add the NSX-T Bare Metal Edge cluster to the shared NSX-T Manager cluster.

Create separate NSX-T Manager clusters for each workload domain, and then create a single NSX-T Bare Metal Edge cluster to be shared between NSX-T Manager clusters.

Place the Bare Metal Edge nodes in the same rack as the management domain hosts, and then add the NSX-T Bare Metal Edge cluster to the management domain NSX-T Manager cluster.

Share an NSX-T Manager cluster between both workload domains, and then add the NSX-T Bare Metal Edge cluster to the shared NSX-T Manager cluster.

Create separate NSX-T Manager clusters for each workload domain, and then create separate NSX-T Bare Metal Edge clusters for each workload domain.

Which three options are valid use cases for multiple clusters in a workload domain? (Choose three.)

Workload domain with multiple availability zones each containing clusters

Workload domain with multiple clusters in one rack

Two clusters forming one stretched workload domain

Workload domain with multiple availability zones each containing clusters

Workload domain with multiple clusters in one rack

One cluster stretching two workload domains

Two clusters forming one stretched workload domain

One stretched cluster across two regions and two workload domains

One cluster distributed across two racks and one workload domain

An administrator is planning to deploy an edge cluster in a VMware Cloud Foundation environment.Which three NSX components are automated during this deployment? (Choose three.)

Edge Uplink Profile configuration

Tier-0 and Tier-1 gateway configuration

Tier-0 VRF gateway configuration

Edge Uplink Profile configuration

Tier-0 and Tier-1 gateway configuration

Transport Node Profile configuration

An architect is presented with a Bill of Material for different vSAN ready nodes:* 8 identical nodes with 1 vSAN disk group* 8 identical nodes with 2 vSAN disk groupsWhat is the ideal design of VMware Cloud Foundation domains that the architect should recommend?

1 Management Domain of 4 nodes, 1 Workload Domain of 4 nodes, and 1 Workload Domain of 8 nodes

1 Domain of 16 nodes deployed on a Consolidated Architecture model

1 Management Domain of 6 Nodes, 1 Workload Domain of 4 nodes, and 1 Workload Domain of 6 nodes

1 Management Domain of 6 nodes and 1 Workload Domain of 10 nodes

An administrator is tasked with providing additional North-South throughput to the workloads hosted on overlay-backed networks in a VI Workload Domain stretched cluster. A two-node NSX Edge cluster was previously deployed through SDDC Manager before the cluster was stretched.Which option is valid to add two nodes to the existing edge cluster while maintaining password rotation capability?

Expand the existing NSX Edge cluster using SDDC Manager, and place the additional NSX Edge nodes on the same stretched Workload Domain cluster.

Expand the existing NSX Edge cluster using NSX Manager, and import the additional nodes in SDDC Manager.

Create a new NSX Edge cluster using SDDC Manager on the same stretched Workload Domain cluster.

Expand the existing NSX Edge cluster using SDDC Manager, and place the additional NSX Edge nodes on the same stretched Workload Domain cluster.

Expand the existing NSX Edge cluster using SDDC Manager, and place the additional NSX Edge nodes on a different stretched Workload Domain cluster.

An administrator is tasked with deploying a VMware Cloud Foundation environment that consists of three VI Workload Domains. Each VI Workload Domain is comprised of two clusters, with 18 hosts in each cluster.Which option fulfills this requirement while minimizing the number of NSX-T Manager instances?

Deploy one medium-sized NSX-T Manager cluster for all VI Workload Domains.

Deploy one large-sized NSX-T Manager cluster for all VI Workload Domains.

Deploy one medium-sized NSX-T Manager cluster for all VI Workload Domains.

Deploy one medium-sized NSX-T Manager cluster per VI Workload Domain

Deploy one large-sized NSX-T Manager cluster per VI Workload Domain.

VMware 5V0-31.22 Practice Test 2 - Free Online Exam Prep & Questions

An administrator is tasked with enabling workload management for a VMware Cloud Foundation Management Workload Domain. This set of requirements was collected during the design workshops:

* Developers should be able to utilize vSphere Pods feature.

* Embedded harbor registry feature should be supported.

* Developers need to utilize persistent volumes across multiple provisioned vSphere Pods.

Which three actions will meet the requirements for this deployment? (Choose three.)

Become a Premium Member for full access

Unlock Premium Member

VMware 5V0-31.22 Practice Test 2

Question

VMware 5V0-31.22 Practice Tests

Practice Tests