Consider the following flow in an object: Which of these statements is true?

The wait stages after read and write stages should be removed they are not required and are lowing the flow down

The flow shown in the diagram is correct, the wart stages are all adding a high level of robustness to the action

The wait stages after read and write stages should be removed they are not required and are lowing the flow down

The wait stages after read stages should be removed, the wart stages after write stages should be left because the application will have been changed

Only the first wait stage in this flow is required, all the other wait stages should be removed.

What is the syntax for using a collection field in an expression?

Like this [MyCollection.MyField]

Like this MyCollection(MyField)

Like this MyCollection[MyField]

Like this [MyCollection[MyField]]

Like this [MyCollection.MyField]

When configuring an object's run mode which of the following is true?

Setting the run mode to background will enable the object to run at the same time as foreground and background objects on the same resource.

Setting the run mode to foreground will give the object priority over the target system ahead of any other Business Object.

Setting the run mode to exclusive will ensure only one process runs on that resource at a time.

Setting the run mode to background will enable the object to run at the same time as foreground and background objects on the same resource.

Leaving the run mode blank will allow any number of processes and objects to run at the same time on the same resource.

When considering an element's attributes in Application Modeller which of the following statements are true? (select all that apply)

The attributes are provided to Blue Prism by the Target System

The list of attributes may vary from application type to application type

Selected attributes are shown as ticks in the Match column of Application Modeller

The attributes are provided to Blue Prism by the Target System

The initial selection of attributes made by Blue Prism will always be the optimum attribute set for the element

The list of attributes may vary from application type to application type

Selected attributes are shown as ticks in the Match column of Application Modeller

How can a session variable value be updated when a process is running? (select all that apply)

By updating the value in Control Room.

By using the Internal - Session Variables business object.

By pausing the Session Variables work queue.

By updating the value in Credential Manager.

By updating the value in Control Room.

If you change a session variable when will the new value be available to the process?

Next time a new case is taken from a WQ

An action called Get Account details' fails with the following exception detail: Which of the following could cause this exception?

The Business Object has not been coupled to the application by either launching it or attaching to it.

An internal error always indicates a problem with the Blue Prism product. The Blue Prism support team should be contacted for assistance

The Read Details action is not connected to another stage so cannot execute.

The Business Object has not been coupled to the application by either launching it or attaching to it.

The Read Details action in the Get Account Details Business Object no longer exists but the Process is attempting to use it.

Consider the following process flow: What is the problem with this flow?

There is nothing wrong with this flow.

The exception handling in this flow can be removed because an Attach action in a navigate stage should always work if configured correctly

The Attach Block should be enlarged to also include the Waited Long Enough decision stage.

The flow contains a recover stage and a route from it without a resume stage. This will cause internal errors on future exceptions thrown in the same session.

The 0.5 second wait stage should be removed so that the retries can be performed at full speed.

Study the following process flow on the Main Page of a process where the intention is to preserve the current exception. What is wrong with the design?

The exception caught by Recover2 will not be preserved by the Re-Throw Exception stage

The exception handling is not within an Exception Block.

The exception caught by Recover2 will not be preserved by the Re-Throw Exception stage

The Send Alerts process will never be run

Because the flow is on the Main Page of the process there should not be a 'Re-Throw' Exception stage as there are no parent/calling pages for the exception to bubble up' to.

Refer to the exhibit. What is wrong with the flow shown in the image?

The retry loop logic does not include any navigation after the resume stage to ensure the application is ready to try the 'Search Screen -Perform Search' action again.

Sub-pages should not have retry logic, exception handling should be in the object level rather than in the process.

The resume stage must also be within the exception block

The retry loop logic does not include any navigation after the resume stage to ensure the application is ready to try the 'Search Screen -Perform Search' action again.

The retry loop logic shown in the image is incorrect because it uses multiple action stages. There should be a retry loop around every action.

Study the following image showing pan: of the flow within a process:

The Retry Count is not being incremented for each retry.

If an exception is thrown in the Cancel Reservation page and is allowed to bubble up to be caught by the Recover stage, the Create Reservation action won't be retried.

There is a missing Recover stage on one of the routes through the flow.

There is a missing Resume stage on one of the routes through the flow.

The Retry Count is not being incremented for each retry.

If an exception is thrown in the Cancel Reservation page and is allowed to bubble up to be caught by the Recover stage, the Create Reservation action won't be retried.

Look at this flow diagram from the Main Page of a process in Process Studio: Thinking about the standard Blue Prism Process Templates, what is wrong with how this Mam Page is handling exceptions?

There is nothing wrong with the Main Page flow shown in the image, it is a copy of Blue Prism's standard Process Template.

The Exception Block in the image should be extended to cover all stages in the flow rather than just 4 sub-pages.

It would be better to remove the Exception Block and recover, resume logic, and instead handle any exceptions in the sub-pages. Flag data items could instead be passed up as output parameters from the sub-pages informing the Main Page flow if an exception has occurred.

The exception handling in the image does not contain any concurrent exception logic. This means there is nothing stopping every item in the Work Queue being marked with the exact same System Exception.

Between the Recover and Resume stages there should be logic to reset the application ready for the next case to be worked For example, this could call the Close Down and Start Up pages.

Consider the following flow within an Object Studio action: The developer of this flow found that writing some credentials to the target application sometimes failed with an exception even though the element exists on the screen. He found that simply catching the exception, waiting for 2 seconds and then retrying fixed the problem.What problems do you see within the flow? (select 2 responses)

A block has not been placed around the Write stage and the Recover stage, meaning the credentials action could be unnecessarily retried if another stage further into this action throws an exception.

There is a potential for an infinite loop if the 'Credentials' stage keeps throwing an exception for some unforeseen reason.

A block has not been placed around the Write stage and the Recover stage, meaning the credentials action could be unnecessarily retried if another stage further into this action throws an exception.

There is a potential for an infinite loop if the 'Credentials' stage keeps throwing an exception for some unforeseen reason.

The credentials stage is a read stage not a write stage

There is not a Resume stage following the timeout of the Wait stage

Consider the following diagram from an object studio action: What is the problem with this flow?

The Exception Block should be removed from the page so that all exceptions on that page can be recovered.

There is a risk of the flow causing an infinite loop

There should be a wait stage at the end of the flow, before the end stage to ensure the flow logic has worked correctly

There is nothing wrong with the object flow shown in this image.

The Exception Block should be removed from the page so that all exceptions on that page can be recovered.

Examine the Process below: An error has been encountered on Page 1 and the exception has bubbled up to be recovered in the Recover 1 stage. If there is an error in the Calc 1 stage which path will the Process take?

The Error will cause the Process to terminate

The Process will continue to the Resume 1 Stage

The Error will cause the Process to terminate

The Error will be recovered in the Recover2 Stage

The Error will cause the Process to jump to the End Stage

Examine the flow below: An error has been encountered on Page 1 and the exception has bubbled up to be recovered in the Recoverd stage The Yes' path has been taken from the 'Throw new Exception?' decision stage. Consider the Throw Exception stage properties below: How should the properties be configured for the Process to throw a new Business exception, i.e. a different exception to the one encountered in Page?

Type Business Exception in the Exception Type field and type a custom message in the Exception Detail field.

Configure ExceptionType() in the Exception Type field and ExceptionDetail() in the Exception Detail field. Leave the Preserve the type and detail of the current exception checkbox un-ticked.

Tick the Preserve the type and detail of the current exception checkbox. Leave the Exception Type and Exception Detail fields blank

Leave the Exception Type field blank and type 'Business Exception' in the Exception Detail field.

Type Business Exception in the Exception Type field and type a custom message in the Exception Detail field.

Consider the following process flow from a sub-page of a process: What is the problem with this sub-page flow?

There is nothing wrong with the sub-page flow shown in this image

The sub-page process flow is missing any retry exception handling that should exist where a process calls object actions that interface with an application.

For better visibility of the process logic the flow steps shown in the image should be on the main page rather than in a sub-page of the process.

The exception stage within the flow should be removed and replaced with an End stage that returns the found data item as an output parameter.

What is the Blue Prism Application Navigator

It is Application Modeller functionality to create an application's entire element tree that when selected will highlight individual elements in the application.

It is the spy tool that you drag around the application to identify attributes.

It is part of the zoom tool in Process and Object Studio that allows you to instantly jump to different parts of the process map

It is the Studio list side-bar of Process and Objects.

It is Application Modeller functionality to create an application's entire element tree that when selected will highlight individual elements in the application.

A Blue Prism solution interfaces with an internet application called HappyWeb. There is a test website available for development, and a training site available for user acceptance testing, and there is the production she available for processing live cases in HappyWeb.Which of the following is true?

All development and testing MUST be done using the production site. This is because the test and training websites might not mirror production exactly.

A local text file should be used to easily configure the details of the HappyWeb website to be used in each Blue Prism environment.

An Environment variable should be used to store the HappyWeb URL.

Three different versions of object that launches the HappyWeb website will need to be created and maintained, one for each environment.

When building a solution to use Tags within a Work Queue, which of the following statements is correct true?

Adding a tag does not require an item to be locked

Adding a tag requires an item to be locked

Adding a tag requires an item to be locked if there are multiple resources working the same queue

Adding a tag does not require an item to be locked

According to Blue Prism best practice which of the following information would be appropriate to store in a Work Queue tag? (select 3 responses)

Something that identifies the type of work that was performed Example tags might be: Funds Transferred, SIM Card Requested, Account, Closed, Account Suspended, Account Noted

Something that identifies the source of work. Example of tags might include: Email, Web Form, Excel Adhoc. Database

Something that identifies the type of process scenario. Example of tags might include: Invalid Product, Unrecognised customer, Goneaway Marker, Invalid Status

Something that identifies the type of work that was performed Example tags might be: Funds Transferred, SIM Card Requested, Account, Closed, Account Suspended, Account Noted

Something that identifies exact datetime of a step in the process. Example of tags might include Account Closed 20/03/2017 12:12:16, Work Completed 20/03/2017 12:12:16: Request Loaded 20/03/2017 12:12:16

Something that identifies the source of work. Example of tags might include: Email, Web Form, Excel Adhoc. Database

Something that identifies the client record to make work queue items easier to search. Example tags might be a phone number, customer reference number or ID, customer full name. For example: +4407994446767, 00023231 A; Mr John A Smith

Something that identifies the type of process scenario. Example of tags might include: Invalid Product, Unrecognised customer, Goneaway Marker, Invalid Status

Details of an exception that has occurred. For example: The Login Screen was not found.

The Work Queue 'Customer Onboarding' has a number of Pending Items which may be tagged as 'Domestic', 'Retail' or 'Business' There is also a tag for the 8 digit product code formatted as 'Product Code: {product code}' e.g. Product Code: CA123456.What is the correct configuration to get the next item from the queue that:* Isn't applying for a loan product i.e. Product Code doesn't begin with 'LN'And* Is a domestic customer

Configure 'Domestic; -Product Code: LN?' in the Tag Filter parameter

Configure 'Domestic; -Product Code: I_N'' in the Tag Filter parameter

Configure 'Domestic; -Product Code: LN?' in the Tag Filter parameter

Configure 'Domestic and Product Code <> LN?' in the Tag Filter parameter

Configure 'Domestic + [Product Code] <> LN*'''' in the Tag Filter parameter

Which of the following statements regarding the use of Worker Queues are correct? (select 2 responses)

Control Room allows filtering of the displayed queue items using exact tags and by using wildcards

Work Queue item Status can only be set to Completed or Exception

Control Room allows filtering of the displayed queue items using exact tags and by using wildcards

Wildcards are not allowed in the Tag Fitter property of the Work Queues business object Get Next Item action

Work Queue item Status can only be set to Completed or Exception

Tags can be used allow flexibility in the order items are worked within a single Work Queue

Which of the following statements regarding the use of Work Queues are correct? (select 2 responses)

Control Room allows filtering of the displayed queue items using exact tags and by using wildcards

Work Queue item Status can only be set to Completed or Exception

Control Room allows filtering of the displayed queue items using exact tags and by using wildcards

Wildcards are not allowed in the Tag Fitter property of the Work Queues business object Get Next Item action

Work Queue item Status can only be set to Completed or Exception

Tags can be used allow flexibility in the order items are worked within a single Work Queue

The Work Queue 'Account Closure has a number of Pending Items which may be tagged as 'Current', 'Saving' or 'Loan' What is the correct configuration to get the next item from the queue that is tagged either 'Current' or 'Loan'?

Configure 'Current or Loan' in the Tag Filter parameter

Configure '-Saving' in the Tag Filter parameter

Configure 'Current; Loan: in the Tag Filter parameter

Configure 'Current + Loan'' in the Tag Filter parameter

In which of these scenarios is it ok not to use a Blue Prism work queue as part of your Blue Prism solution?

A Blue Prism work queue is not required if the business process interfaces with a Work List system with in-built capability to ensure multiple users cannot work the same case at the same time

A Blue Prism work queue is not required for simple linear processes that do not work multiple cases.

A Blue Prism work queue should always be used. It eliminates the risk of contention and allows you to gracefully pause the queue at any time.

A Blue Prism work queue is not required if the business process interfaces with a Work List system with in-built capability to ensure multiple users cannot work the same case at the same time

A Blue Prism Work Queue decreases the scalability of the solution and therefore should only be used for complex scenarios such as multi-day processing.

Consider the following process flow: Decision 'A' properties are: Decision 'B' properties are: Decision 'C' properties are: What will happen when the process runs?

The flow will pass through calculation stage 'B'

The flow will pass through calculation stage 'A'

The flow will pass through calculation stage 'B'

The flow will pass through calculation stage 'C'

A process contains only 4 stages Study the following process flow: The data Item Result' is a number data item with an initial value of 2.The calculation stage is configured as follows: Following the execution of the Perform Calculation stage, which of the following is true?

The data item Result will contain 3

The data item Result will contain 5

The process will throw an exception

None of these statements are correct

Blue Prism AD01 Practice Test 2 - Free Online Exam Questions 41-80

You identify an element in Application Modeller and it highlights uniquely and can be used in your object flow diagram. The next day you find that Blue Prism cannot no longer identify the same element, your object flow is giving you 'Element not found' exceptions. Which of the following statements is true?

Become a Premium Member for full access

Unlock Premium Member

Blue Prism AD01 Practice Test 2

Question

Blue Prism AD01 Practice Tests

Practice Tests