Blue Prism Enterprise is shipped with Visual Business Objects (VBO) However these need to be imported into the Environment Where can these VBOs be found?

[Root Directory] AProgram Files\Blue Prism Limited\Blue Prism Automate\VBO\

[Root Directory] \BluePrism\VBO\lnstall'.

[Root Directory] \Blue Pnsm Training'*

[Root Directory] AProgram Files\Blue Prism Limited\Blue Prism Automate\VBO\

[Root Directory] AProgram Files\Blue Prism Limited\

Examine the following Process flow which calculates the total of all customer credit transactions: The 'Customer Transactions' Collection contains the following data Debit transactions can be identified using the Transaction Code column, which will contain a value between 01 and 49. Credit transactions can be identified using the Transaction Code column, which will contain a value between 50 and 99 The 'Loop Customer Transactions' loop is configured to loop through the 'Customer Transactions' CollectionWhat is the correct expression for the 'Credit Transaction?' Decision stage, to ensure that only credit transactions are included when calculating the total of customer credits'?

ToNumber([Customer Transactions Transaction Code]) >= 50

MakeNumber([Transaction Code]) >- 50

ToNumber([Transaction Code]) >= 50

[Customer Transactions Transaction Code] >= 50

ToNumber([Customer Transactions Transaction Code]) >= 50

MakeNumber([Customer Transactions.Transaction Code]) >= 50

Study the following Action flow in a Blue Prism Business Object: Which of the following statements are true about this flow'?

To correct this Action, intelligent Wait stages should be added after the start stage and after any stage that will cause the application we are interfacing with to change

If during testing the Action flow completes as expected, then no additional Wait stages are required as this will slow down the execution of the Acton flow

A single intelligent Wait stage should be added between the 'Start' stage and the 'Write Customer ID' stage to correct this Action

To correct this Action, intelligent Wait stages should be added after the start stage and after any stage that will cause the application we are interfacing with to change

Intelligent Wait stages should be added after every stage in the flow (i.e. after any Navigate Write or Read stages), to correct this Action

After launching the order processing application, the following login screen is displayed to the user, requesting their login details: The following Launch Action has been created in Blue Prism: According to Blue Prism best practice, what should be configured between the Launch and End stages?

A Wait Stage to check for an element on the Login screen

A Navigate stage to Attach to the application

A Write stage to enter the Staff Number and Password

A Read Stage to read an element from the Login screen

Which of the following statements are correct when considering an elements attributes in Application Modeller?(Select all items which apply)

The attributes displayed in Application Modeller are provided to Blue Prism by the target business application

Attributes which are included in the element match criteria contain a tick in the Match column of Application Modeller

The attribute list will always contain the same entries regardless of the target application or element

The initial selection of attributes made by Blue Prism will always be the optimum attribute set to use to match the element

The attributes displayed in Application Modeller are provided to Blue Prism by the target business application

Attributes which are included in the element match criteria contain a tick in the Match column of Application Modeller

Which of the following options can be used to update the value of a data item exposed as a 'Session Variable', whilst the process is running?(Select all items which apply)

Through a Calculation stage in the same process

Selecting the running Process in Control Room and then using the menu options to push a new value to the data item

By updating the data item value in the Variable Repository in System Manager

By updating the data item value in System Manager

Through a Calculation stage in the same process

Selecting the running Process in Control Room and then using the menu options to push a new value to the data item

Consider the following process flow: Decision JA' properties are: Decision 'B' properties are. Decision 'C' properties are What will happen when the process runs?

The flow will pass through calculation stage 'A'

The flow will pass through calculation stage 'B'

The flow will pass through calculation stage 'C'

The following Calculation Stage uses the Today function to get the current date as a date value and place it in a data item entitled 'Today'. Which of the following statements is correct?

If the data item 'Today' is configured with a Data Type of DateTime, an exception will be thrown on execution of the calculation stage

If the data item 'Today' is configured with a Data Type of Text, an exception will be thrown on execution of the calculation stage

If the data item 'Today' is configured with a Data Type of Date, an exception will be thrown on execution of the calculation stage

If the data item 'Today' is configured with a Data Type of DateTime, an exception will be thrown on execution of the calculation stage

None of these statements are correct

Study at the following diagram which is an extract from a sub-page of a process being tested in Process Studio: There are no breakpoints in the 'Access Customer Account' subpage however there is an error.What will happen if you choose to step out (SHIFT+ F11) when debugging the process?

The process will work all stages in the 'Access Customer Account' page until the error is thrown and then focus would move to the 'Exception 1 stage.

The process will work all stages in the 'Access Customer Account page until the error is thrown and then focus would move to the breakpoint at 'Get Customer Details' stage.

The process will work all stages in the 'Access Customer Account1 page until the error is thrown and then focus would move to the 'Recover 1 stage

The process will work all stages in the 'Access Customer Account' page until the error is thrown and then focus would move to the stage containing the error on the 'Access Customer Account' page,

The process will work all stages in the 'Access Customer Account' page until the error is thrown and then focus would move to the 'Exception 1 stage.

Study at the following diagram which is an extract from a process being tested in Process Studio: There are no breakpoints in the 'Access Customer Account' subpage however there is an errorWhat will happen if you choose to step over (F10) when debugging the process?

The process will work all stages in the 'Access Customer Account' page until the error is thrown and then focus will move to the 'Recover 1 stage.

The process will work all stages in the; Access Customer Account' page until the error is thrown and then focus will move to the 'Get Customer Details' stage.

The process will work all stages in the 'Access Customer Account' page until the error is thrown and then focus will move to the 'Recover 1 stage.

The process would will all stages in the 'Access Customer Account' page until the error is thrown and then focus will move to the stage containing the error on the ''Access Customer Account' page.

The process will work all stages in the 'Access Customer Account' page until the error is thrown and then focus would move to the appropriate recover stage on the 'Access Customer Account' page.

Which of the following about an object's run mode is true?

A run mode of exclusive cannot at the same time as any other business object

A run mode of background will enable the business object to run at the same time as other foreground business objects

A run mode of background will enable the business object to run at the time a other background, foreground and exclusive business objects

A run mode of exclusive cannot at the same time as any other business object

The run mode of a business object has no influence on how many business objects can be run at the same time

How can an environment variable value be updated? (select all that apply)

By updating the value in System Manager

By using the Internal - Environment Variables business object

By changing the Blue Prism Server configuration

By updating the value in Control Room

By updating the value in Credential Manager.

By updating the value in System Manager

Consider the following process flow from the Main Page of a process in Process Studio: Thinking about the standard Blue Prism Process Templates, what is wrong with this Main Page process flow?

There is no exception handling on this Main Page so any exceptions that 'bubble up' will cause the process to terminate rather than exceptions being handled correctly.

There is nothing wrong with the Main Page flow shown in the image, it is a copy of Blue Prism's standard Process Template

The Stop? decision stage should be removed from the process flow, as Stop time is Configured either within the Scheduler process are stopped via Control Room.

The Mam Page process flow is too high level For better visibility of the process logic the flow steps hidden m the sub-pages should al be on the main page instead.

There is no exception handling on this Main Page so any exceptions that 'bubble up' will cause the process to terminate rather than exceptions being handled correctly.

The Reset Global Data page is not required because sub-page within a process should always use input parameter rather than global data items. There should be no global data to reset.

Which of the following can you perform in me System -> Workflow area of Blue Prism? (select all that apply)

View the contents of a Work Queue

Consider the following flow within an Object Studio action: The developer of this flow found that writing some credentials to the target application sometimes failed with an exception even though the element exists on the screen. He found that simply catching the exception, waiting for 2 seconds and then retrying fixed the problem.What problems do you see within the flow?

There is a potential for an infinite loop if the Credentials' stage keeps throwing an exception for some unforeseen reason

The Resume stage is not within the same Exception Block as the Recover stage and therefore will not work

There is a potential for an infinite loop if the Credentials' stage keeps throwing an exception for some unforeseen reason

The credentials stage is a read stage not a write stage

There is no need for a wait stage in the flow

Please refer to the exhibit. Here's one of the Actions in a Business Object that is used to place orders in an application.What best practice for Object Design is NOT followed in this Action page?

Avoid applying business rules and decision-making logic in an Action

Use a conditional Wait stage to confirm the screen change

The timeout of the Wart stage should lead to a System Exception

An action page should first confirm if the application is connected

Avoid applying business rules and decision-making logic in an Action

There are multiple rows of conditions in the Properties window of the Wait Stage. Which of the following is TRUE?

If all conditions are met before the TimeOut penrid expires, the process will continue

The Wait Stage will sequentially check each condition, it does not require all conditions to be met

If all conditions are met before the TimeOut penrid expires, the process will continue

If no conditions are met, an internal error will appear and terminate the process

The Wait Stage will simultaneously check all conditions and follow the logic of whichever condition is met first

Please refer to the exhibit. When clicking the drop-down on Identify in the Application Modeller, what is the difference between the Spy Element option and the Navigator options?

Spy Element enables you to manually identify an element to use in the Application Modeller, and the Navigator options displays a tree of elements available to choose from

Spy Element enables you to identify an element using their attributes, and the Navigator options are used for visible elements on the screen

Spy Element enables you to identify an element to use in the Application Modeller and the Navigator options are used for debugging when a match cannot be found

Spy Element enables you to choose from a tree of possible elements to use in the Application Modeller, and the Navigator options require you to visually find and manually select the element to identify

Spy Element enables you to manually identify an element to use in the Application Modeller, and the Navigator options displays a tree of elements available to choose from

The Developer is debugging an action page in a Business Object by stepping through the stages which interact with the application. What will happen when they click Reset on an Action page in the Business Object?

Focus will move to the Start stage on the Launch action

Focus will return to the Start stage in the Process Studio

Focus will move to the Start stage on the Launch action

Application window will be closed

Application window will remain open

A Blue Prism Process works successfully when testing in the Process Studio but terminates in Control Room due to the exception stating screen elements were not found What should the Developer check first?

The correct Spy mode was used to identify elements

Application Modeller has a unique match for the screen element

Wait Stages have been used effectively

The Attach page is published in the Business Object

How can input data be added to a Startup Parameter before the process runs?

Right-click the session in Control Room and select Startup Parameters

Navigate to Startup Parameters in the Control Room Scheduler

Navigate to Startup Parameters in the System area and select the correct Process

Right-click the item in the Work Queue and select Startup Parameters

Right-click the session in Control Room and select Startup Parameters

The Developer is importing a Blue Prism release file.What will happen if there is already a Business Object or VBO with the same name in the environment they are importing into?

User will be prompted to rename new object or overwrite old object

It will be imported with a suffix (2> on the file name

The existing Object will be updated with the imported details

A conflict error message will advise user to rename file before importing

User will be prompted to rename new object or overwrite old object

Please refer to the exhibit. How should the Wait Stages be configured in this scenario?

Conditional Wait stage after the Attach page and the Navigate stage

Conditional Wait stage after the Attach page and the Write stage

Conditional Wait stage after the Attach page and the Navigate stage

Unconditional Wait stage after the Attach page and a Conditional Wait after the Write stage

Unconditional Wait stage before the Attach' page and a Conditional Wait after the Navigate stage

Examine the following extract taken from an Action in Object Studio: What will happen if an Exception occurs in the 'Read Nasdaq Data' stage?

The 'Nasdaq Error1 Recover stage will receive Error1 Exceptions, and the 'Nasdaq Error2' Recover stage will receive Error2 Exceptions

The 'Nasdaq Error' Recover stage will receive the Exception as stages and the order of priority are decided using the stage name, which are sorted in ascending order

An Exception Block will allow multiple Recover stages to be placed in the block, however only one of them will be responsive to receiving exceptions, therefore it is impossible to predict what will happen

The 'Nasdaq Error2' Recover stage will receive the Exception as it placed above the 'Nasdaq1 Error' Recover stage in the Action flow

An Internal Exception will be thrown as an Exception Block cannot contain 2 blocks

A Blue Prism Process has been developed which contains steps to extract data from a delimited file.During development, the Developer saves the delimited file to C:\BP_Proc\Temp folder on their virtual desktop and adds a data item to the process to store this file path. This data item is then used in the process steps to extract the file data.The production Process must read this file from a network folder, and as the Blue Prism production environment is locked down, the Process configuration cannot be edited in this environment.How could the data item 'exposure' be updated, so that the process can read the data item containing the relevant file path, regardless of the environment the process is being executed in?

Update the data item exposure to 'Environment'

Update the data item exposure to 'Statistic'

Update the data item exposure to 'Environment'

Update the data item exposure to 'Session'

Update the data item exposure to 'Shared'

Examine the following sub-page of a Blue Prism Process: The 'Decision A' stage properties window is displayed below: The 'Decision B' stage properties window is displayed below: The Calculation stages will output A, B or C to the Result data item.What will the value of the Result data item be after this page has been run?

Blank - an internal exception will be thrown

Examine the following Blue Prism Process diagram: The 'Calculation Result' data item is configured as a number data item with an initial value of 100.The Calculation stage Properties window is displayed below: After the Process flow has run, which of the following statements are true?

The 'Calculation Result' data item value item will be 125

The 'Calculation Result' data item value will be 25

The 'Perform Calculation' Calculation stage will throw an exception

The 'Calculation Result' data item value item will be 125

None of these statements are true

Blue Prism AD01 Practice Test 3 - Free Online Exam Prep & Questions

Question 1 / 40

A process contains only 4 stages. Study the following process flow.

Blue Prism AD01 image Question 81 20572 09162024192226000000

The data item New Date is a date data item with no initial value.

The calculation stage is configured as follows:

Blue Prism AD01 image Question 81 20572 09162024192226000000

What will happen when you execute the Create Date stage?

5 days will be added to today's date and the result stored in the New Date data item.

1 month will be added to today's date and the result stored in the New Date data item.

1 week will be added to today's date and the result stored in the New Date data item.

The process will throw an exception as the New Date data item is null.

Comment (0)

Blue Prism AD01 Practice Test 3

Question

Blue Prism AD01 Practice Tests

Practice Tests