Home / Amazon / ANS-C01

Amazon ANS-C01 Practice Test - Questions Answers, Page 2

Question list

List of questions

Question 11

(0)

A company is using custom DNS servers that run BIND for name resolution in its VPCs. The VPCs are deployed across multiple AWS accounts that are part of the same organization in AWS Organizations.

Question 12

(0)

An ecommerce company is hosting a web application on Amazon EC2 instances to handle continuously changing customer demand. The EC2 instances are part of an Auto Scaling group. The company wants to i

Question 13

(0)

A company has two on-premises data center locations. There is a company-managed router at each data center. Each data center has a dedicated AWS Direct Connect connection to a Direct Connect gateway

Question 14

(0)

A company has expanded its network to the AWS Cloud by using a hybrid architecture with multiple AWS accounts. The company has set up a shared AWS account for the connection to its on-premises data

Question 15

(0)

A company has multiple AWS accounts. Each account contains one or more VPCs. A new security guideline requires the inspection of all traffic between VPCs. The company has deployed a transit gateway

Question 16

(0)

A company is using a NAT gateway to allow internet connectivity for private subnets in a VPC in the us-west-2 Region. After a security audit, the company needs to remove the NAT gateway. In the pri

Question 17

(0)

An international company provides early warning about tsunamis. The company plans to use IoT devices to monitor sea waves around the world. The data that is collected by the IoT devices must reach t

Question 18

(0)

A company is planning a migration of its critical workloads from an on-premises data center to Amazon EC2 instances. The plan includes a new 10 Gbps AWS Direct Connect dedicated connection from the

Question 19

(0)

A network engineer must develop an AWS CloudFormation template that can create a virtual private gateway, a customer gateway, a VPN connection, and static routes in a route table. During testing of

Question 20

(0)

A company operates its IT services through a multi-site hybrid infrastructure. The company deploys resources on AWS in the us-east-1 Region and in the eu-west-2 Region. The company also deploys reso

Related questions

A banking company is successfully operating its public mobile banking stack on AWS. The mobile banking stack is deployed in a VPC that includes private subnets and public subnets. The company is using IPv4 networking and has not deployed or supported IPv6 in the environment. The company has decided to adopt a third-party service provider's API and must integrate the API with the existing environment. The service provider’s API requires the use of IPv6. A network engineer must turn on IPv6 connectivity for the existing workload that is deployed in a private subnet. The company does not want to permit IPv6 traffic from the public internet and mandates that the company's servers must initiate all IPv6 connectivity. The network engineer turns on IPv6 in the VPC and in the private subnets. Which solution will meet these requirements?

A bank built a new version of its banking application in AWS using containers that content to an onpremises database over VPN connection. This application version requires users to also update their client application. The bank plans to deprecate the earlier client version. However, the company wants to keep supporting earlier clients through their on-premises version of the application to serve a small portion of the customers who haven’t yet upgraded. What design will allow the company to serve both newer and earlier clients in the MOST efficient way?

A company is using an Amazon CloudFront distribution that is configured with an Application Load Balancer (ALB) as an origin. A network engineer needs to implement a solution that requires all inbound traffic to the ALB to come from CloudFront. The network engineer must implement the solution at the network layer rather than in the application. Which solution will meet these requirements in the MOST operationally efficient way?

A company has an AWS Site-to-Site VPN connection between its existing VPC and on-premises network. The default DHCP options set is associated with the VPC. The company has an application that is running on an Amazon Linux 2 Amazon EC2 instance in the VPC. The application must retrieve an Amazon RDS database secret that is stored in AWS Secrets Manager through a private VPC endpoint. An on-premises application provides internal RESTful API service that can be reached by URL ( https://api.example.internal ). Two on-premises Windows DNS servers provide internal DNS resolution. The application on the EC2 instance needs to call the internal API service that is deployed in the onpremises environment. When the application on the EC2 instance attempts to call the internal API service by referring to the hostname that is assigned to the service, the call fails. When a network engineer tests the API service call from the same EC2 instance by using the API service's IP address, the call is successful. What should the network engineer do to resolve this issue and prevent the same problem from affecting other resources in the VPC?

A company's development team has created a new product recommendation web service. The web service is hosted in a VPC with a CIDR block of 192.168.224.0/19. The company has deployed the web service on Amazon EC2 instances and has configured an Auto Scaling group as the target of a Network Load Balancer (NLB). The company wants to perform testing to determine whether users who receive product recommendations spend more money than users who do not receive product recommendations. The company has a big sales event in 5 days and needs to integrate its existing production environment with the recommendation engine by then. The existing production environment is hosted in a VPC with a CIDR block of 192.168.128 0/17. A network engineer must integrate the systems by designing a solution that results in the least possible disruption to the existing environments. Which solution will meet these requirements?

An ecommerce company needs to Implement additional security controls on all its domain names that are hosted in Amazon Route 53. The company's new policy requires data authentication and data integrity verification for all queries to the company's domain names. The current Route 53 architecture has four public hosted zones. A network engineer needs to implement DNS Security Extensions (DNSSEC) signing and validation on the hosted zones. The solution must include an alert capability. Which combination of steps will meet these requirements? {Select THREE)

A company has deployed a critical application on a fleet of Amazon EC2 instances behind an Application Load Balancer. The application must always be reachable on port 443 from the public internet. The application recently had an outage that resulted from an incorrect change to the EC2 security group. A network engineer needs to automate a way to verify the network connectivity between the public internet and the EC2 instances whenever a change is made to the security group. The solution also must notify the network engineer when the change affects the connection. Which solution will meet these requirements?

A company has established connectivity between its on-premises data center in Paris, France, and the AWS Cloud by using an AWS Direct Connect connection. The company uses a transit VIF that connects the Direct Connect connection with a transit gateway that is hosted in the Europe (Paris) Region. The company hosts workloads in private subnets in several VPCs that are attached to the transit gateway. The company recently acquired another corporation that hosts workloads on premises in an office building in Tokyo, Japan. The company needs to migrate the workloads from the Tokyo office to AWS. These workloads must have access to the company's existing workloads in Paris. The company also must establish connectivity between the Tokyo office building and the Paris data center. In the Asia Pacific (Tokyo) Region, the company creates a new VPC with private subnets for migration of the workloads. The workload migration must be completed in 5 days. The workloads cannot be directly accessible from the internet. Which set of steps should a network engineer take to meet these requirements?

A company is deploying AWS Cloud WAN with edge locations in the us-east-1 Region and the ap-southeast-2 Region. Individual AWS Cloud WAN segments are configured for the development environment, the production environment, and the shared services environment at each edge location. Many new VPCs will be deployed for the environments and will be configured as attachments to the AWS Cloud WAN core network. The company's network team wants to ensure that VPC attachments are configured for the correct segment. The network team will tag the VPC attachments by using the Environment key with a value of the corresponding environment segment name. The segment for the production environment in us-east-1 must require acceptance for attachment requests. AH other attachment requests must not require acceptance. Which solution will meet these requirements?

A company is planning to host external websites on AWS. The websites will include multiple tiers such as web servers, application logic services, and databases. The company wants to use AWS Network Firewall. AWS WAR and VPC security groups for network security. The company must ensure that the Network Firewall firewalls are deployed appropriately within relevant VPCs. The company needs the ability to centrally manage policies that are deployed to Network Firewall and AWS WAF rules. The company also needs to allow application teams to manage their own security groups while ensuring that the security groups do not allow overly permissive access. What is the MOST operationally efficient solution that meets these requirements?

Question 11

A company is using custom DNS servers that run BIND for name resolution in its VPCs. The VPCs are deployed across multiple AWS accounts that are part of the same organization in AWS Organizations.

All the VPCs are connected to a transit gateway. The BIND servers are running in a central VPC and are configured to forward all queries for an on-premises DNS domain to DNS servers that are hosted in an on-premises data center. To ensure that all the VPCs use the custom DNS servers, a network engineer has configured a VPC DHCP options set in all the VPCs that specifies the custom DNS servers to be used as domain name servers.

Multiple development teams in the company want to use Amazon Elastic File System (Amazon EFS).

A development team has created a new EFS file system but cannot mount the file system to one of its Amazon EC2 instances. The network engineer discovers that the EC2 instance cannot resolve the IP address for the EFS mount point fs-33444567d.efs.us-east-1.amazonaws.com. The network engineer needs to implement a solution so that development teams throughout the organization can mount EFS file systems.

Which combination of steps will meet these requirements? (Choose two.)

Configure the BIND DNS servers in the central VPC to forward queries for efs.us-east- 1.amazonaws.com to the Amazon provided DNS server (169.254.169.253).

Create an Amazon Route 53 Resolver outbound endpoint in the central VPC. Update all the VPC DHCP options sets to use AmazonProvidedDNS for name resolution.

Create an Amazon Route 53 Resolver inbound endpoint in the central VPUpdate all the VPC DHCP options sets to use the Route 53 Resolver inbound endpoint in the central VPC for name resolution.

Create an Amazon Route 53 Resolver rule to forward queries for the on-premises domain to the on-premises DNS servers. Share the rule with the organization by using AWS Resource Access Manager (AWS RAM). Associate the rule with all the VPCs.

Create an Amazon Route 53 private hosted zone for the efs.us-east-1.amazonaws.com domain.Associate the private hosted zone with the VPC where the EC2 instance is deployed. Create an A record for fs-33444567d.efs.us-east-1.amazonaws.com in the private hosted zone. Configure the A record to return the mount target of the EFS mount point.

Show Answer Comment (0)

Question 12

An ecommerce company is hosting a web application on Amazon EC2 instances to handle continuously changing customer demand. The EC2 instances are part of an Auto Scaling group. The company wants to implement a solution to distribute traffic from customers to the EC2 instances.

The company must encrypt all traffic at all stages between the customers and the application servers.

No decryption at intermediate points is allowed.

Which solution will meet these requirements?

Create an Application Load Balancer (ALB). Add an HTTPS listener to the ALB. Configure the AutoScaling group to register instances with the ALB's target group.

Create an Amazon CloudFront distribution. Configure the distribution with a custom SSL/TLS certificate. Set the Auto Scaling group as the distribution's origin.

Create a Network Load Balancer (NLB). Add a TCP listener to the NLB. Configure the Auto Scaling group to register instances with the NLB's target group.

Create a Gateway Load Balancer (GLB). Configure the Auto Scaling group to register instances with the GLB's target group.

Show Answer Comment (0)

Question 13

A company has two on-premises data center locations. There is a company-managed router at each data center. Each data center has a dedicated AWS Direct Connect connection to a Direct Connect gateway through a private virtual interface. The router for the first location is advertising 110 routes to the Direct Connect gateway by using BGP, and the router for the second location is advertising 60 routes to the Direct Connect gateway by using BGP. The Direct Connect gateway is attached to a company VPC through a virtual private gateway.

A network engineer receives reports that resources in the VPC are not reachable from various locations in either data center. The network engineer checks the VPC route table and sees that the routes from the first data center location are not being populated into the route table. The network engineer must resolve this issue in the most operationally efficient manner.

What should the network engineer do to meet these requirements?

Remove the Direct Connect gateway, and create a new private virtual interface from each company router to the virtual private gateway of the VPC.

Change the router configurations to summarize the advertised routes.

Open a support ticket to increase the quota on advertised routes to the VPC route table.

Create an AWS Transit Gateway. Attach the transit gateway to the VPC, and connect the Direct Connect gateway to the transit gateway.

Show Answer Comment (0)

Question 14

A company has expanded its network to the AWS Cloud by using a hybrid architecture with multiple AWS accounts. The company has set up a shared AWS account for the connection to its on-premises data centers and the company offices. The workloads consist of private web-based services for internal use. These services run in different AWS accounts. Office-based employees consume these services by using a DNS name in an on-premises DNS zone that is named example.internal.

The process to register a new service that runs on AWS requires a manual and complicated change request to the internal DNS. The process involves many teams.

The company wants to update the DNS registration process by giving the service creators access that will allow them to register their DNS records. A network engineer must design a solution that will achieve this goal. The solution must maximize cost-effectiveness and must require the least possible number of configuration changes.

Which combination of steps should the network engineer take to meet these requirements? (Choose three.)

Create a record for each service in its local private hosted zone (serviceA.account1.aws.example.internal). Provide this DNS record to the employees who need access.

Create an Amazon Route 53 Resolver inbound endpoint in the shared account VPC. Create a conditional forwarder for a domain named aws.example.internal on the on-premises DNS servers.Set the forwarding IP addresses to the inbound endpoint's IP addresses that were created.

Create an Amazon Route 53 Resolver rule to forward any queries made to onprem.example.internal to the on-premises DNS servers.

Create an Amazon Route 53 private hosted zone named aws.example.internal in the shared AWS account to resolve queries for this domain.

Launch two Amazon EC2 instances in the shared AWS account. Install BIND on each instance.Create a DNS conditional forwarder on each BIND server to forward queries for each subdomain under aws.example.internal to the appropriate private hosted zone in each AWS account. Create a conditional forwarder for a domain named aws.example.internal on the on-premises DNS servers.Set the forwarding IP addresses to the IP addresses of the BIND servers.

Create a private hosted zone in the shared AWS account for each account that runs the service.Configure the private hosted zone to contain aws.example.internal in the domain (account1.aws.example.internal). Associate the private hosted zone with the VPC that runs the service and the shared account VPC.

Show Answer Comment (0)

Question 15

A company has multiple AWS accounts. Each account contains one or more VPCs. A new security guideline requires the inspection of all traffic between VPCs.

The company has deployed a transit gateway that provides connectivity between all VPCs. The company also has deployed a shared services VPC with Amazon EC2 instances that include IDS services for stateful inspection. The EC2 instances are deployed across three Availability Zones. The company has set up VPC associations and routing on the transit gateway. The company has migrated a few test VPCs to the new solution for traffic inspection.

Soon after the configuration of routing, the company receives reports of intermittent connections for traffic that crosses Availability Zones.

What should a network engineer do to resolve this issue?

Modify the transit gateway VPC attachment on the shared services VPC by enabling cross- Availability Zone load balancing.

Modify the transit gateway VPC attachment on the shared services VPC by enabling appliance mode support.

Modify the transit gateway by selecting VPN equal-cost multi-path (ECMP) routing support.

Modify the transit gateway by selecting multicast support.

Show Answer Comment (0)

Question 16

A company is using a NAT gateway to allow internet connectivity for private subnets in a VPC in the us-west-2 Region. After a security audit, the company needs to remove the NAT gateway.

In the private subnets, the company has resources that use the unified Amazon CloudWatch agent. A network engineer must create a solution to ensure that the unified CloudWatch agent continues to work after the removal of the NAT gateway.

Which combination of steps should the network engineer take to meet these requirements? (Choose three.)

Validate that private DNS is enabled on the VPC by setting the enableDnsHostnames VPC attribute and the enableDnsSupport VPC attribute to true.

Create a new security group with an entry to allow outbound traffic that uses the TCP protocol on port 443 to destination 0.0.0.0/0

Create a new security group with entries to allow inbound traffic that uses the TCP protocol on port 443 from the IP prefixes of the private subnets.

Create the following interface VPC endpoints in the VPC: com.amazonaws.us-west-2.logs and com.amazonaws.us-west-2.monitoring. Associate the new security group with the endpoint network interfaces.

Create the following interface VPC endpoint in the VPC: com.amazonaws.us-west-2.cloudwatch.Associate the new security group with the endpoint network interfaces.

Associate the VPC endpoint or endpoints with route tables that the private subnets use.

Show Answer Comment (0)

Question 17

An international company provides early warning about tsunamis. The company plans to use IoT devices to monitor sea waves around the world. The data that is collected by the IoT devices must reach the company’s infrastructure on AWS as quickly as possible. The company is using three operation centers around the world. Each operation center is connected to AWS through Its own AWS Direct Connect connection. Each operation center is connected to the internet through at least two upstream internet service providers.

The company has its own provider-independent (PI) address space. The IoT devices use TCP protocols for reliable transmission of the data they collect. The IoT devices have both landline and mobile internet connectivity. The infrastructure and the solution will be deployed in multiple AWS Regions.

The company will use Amazon Route 53 for DNS services.

A network engineer needs to design connectivity between the IoT devices and the services that run in the AWS Cloud.

Which solution will meet these requirements with the HIGHEST availability?

Set up an Amazon CloudFront distribution with origin failover. Create an origin group for each Region where the solution is deployed.

Set up Route 53 latency-based routing. Add latency alias records. For the latency alias records, set the value of Evaluate Target Health to Yes.

Set up an accelerator in AWS Global Accelerator. Configure Regional endpoint groups and health checks.

Set up Bring Your Own IP (BYOIP) addresses. Use the same PI addresses for each Region where the solution is deployed.

Show Answer Comment (0)

Question 18

A company is planning a migration of its critical workloads from an on-premises data center to Amazon EC2 instances. The plan includes a new 10 Gbps AWS Direct Connect dedicated connection from the on-premises data center to a VPC that is attached to a transit gateway. The migration must occur over encrypted paths between the on-premises data center and the AWS Cloud.

Which solution will meet these requirements while providing the HIGHEST throughput?

Configure a public VIF on the Direct Connect connection. Configure an AWS Site-to-Site VPN connection to the transit gateway as a VPN attachment.

Configure a transit VIF on the Direct Connect connection. Configure an IPsec VPN connection to an EC2 instance that is running third-party VPN software.

Configure MACsec for the Direct Connect connection. Configure a transit VIF to a Direct Connect gateway that is associated with the transit gateway.

Configure a public VIF on the Direct Connect connection. Configure two AWS Site-to-Site VPN connections to the transit gateway. Enable equal-cost multi-path (ECMP) routing.

Show Answer Comment (0)

Question 19

A network engineer must develop an AWS CloudFormation template that can create a virtual private gateway, a customer gateway, a VPN connection, and static routes in a route table. During testing of the template, the network engineer notes that the CloudFormation template has encountered an error and is rolling back.

What should the network engineer do to resolve the error?

Change the order of resource creation in the CloudFormation template.

Add the DependsOn attribute to the resource declaration for the virtual private gateway. Specify the route table entry resource.

Add a wait condition in the template to wait for the creation of the virtual private gateway.

Add the DependsOn attribute to the resource declaration for the route table entry. Specify the virtual private gateway resource.

Show Answer Comment (0)

Question 20

A company operates its IT services through a multi-site hybrid infrastructure. The company deploys resources on AWS in the us-east-1 Region and in the eu-west-2 Region. The company also deploys resources in its own data centers that are located in the United States (US) and in the United Kingdom (UK). In both AWS Regions, the company uses a transit gateway to connect 15 VPCs to each other. The company has created a transit gateway peering connection between the two transit gateways. The VPC CIDR blocks do not overlap with each other or with IP addresses used within the data centers. The VPC CIDR prefixes can also be aggregated either on a Regional level or for the company's entire AWS environment.

The data centers are connected to each other by a private WAN connection. IP routing information is exchanged dynamically through Interior BGP (iBGP) sessions. The data centers maintain connectivity to AWS through one AWS Direct Connect connection in the US and one Direct Connect connection in the UK. Each Direct Connect connection is terminated on a Direct Connect gateway and is associated with a local transit gateway through a transit VIF.

Traffic follows the shortest geographical path from source to destination. For example, packets from the UK data center that are targeted to resources in eu-west-2 travel across the local Direct Connect connection. In cases of cross-Region data transfers, such as from the UK data center to VPCs in useast- 1, the private WAN connection must be used to minimize costs on AWS. A network engineer has configured each transit gateway association on the Direct Connect gateway to advertise VPC-specific CIDR IP prefixes only from the local Region. The routes toward the other Region must be learned through BGP from the routers in the other data center in the original, non-aggregated form.

The company recently experienced a problem with cross-Region data transfers because of issues with its private WAN connection. The network engineer needs to modify the routing setup to prevent similar interruptions in the future. The solution cannot modify the original traffic routing goal when the network is operating normally.

Which modifications will meet these requirements? (Choose two.)

Remove all the VPC CIDR prefixes from the list of subnets advertised through the local Direct Connect connection. Add the company's entire AWS environment aggregate route to the list of subnets advertised through the local Direct Connect connection.

Add the CIDR prefixes from the other Region VPCs and the local VPC CIDR blocks to the list of subnets advertised through the local Direct Connect connection. Configure data center routers to make routing decisions based on the BGP communities received.

Add the aggregate IP prefix for the other Region and the local VPC CIDR blocks to the list of subnets advertised through the local Direct Connect connection.

Add the aggregate IP prefix for the company's entire AWS environment and the local VPC CIDR blocks to the list of subnets advertised through the local Direct Connect connection.

Remove all the VPC CIDR prefixes from the list of subnets advertised through the local Direct Connect connection. Add both Regional aggregate IP prefixes to the list of subnets advertised through the Direct Connect connection on both sides of the network. Configure data center routers to make routing decisions based on the BGP communities received.

Show Answer Comment (0)

Total 153 questions

1 2 3 4 5

Go to page: of 16