Quiz IT certification exam

Question 1

HOTSPOTHow should you configure the release retention policy for the investment planning depletions suite? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Question 2

HOTSPOTCase StudyThis is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next sections of the exam. After you begin a new section, you cannot return to this section.To start the case studyTo display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.Application ArchitectureThe company’s primary application is a single monolithic retirement fund management system based on ASP.NET web forms that use logic written in VB.NET. Some new sections of the application are written in C#.Variations of the application are created for individual customers. Currently, there are more than 80 live code branches in the application’s code base.The application was developed by using Microsoft Visual Studio. Source code is stored in Team Foundation Server (TFS) in the main office. The branch offices access the source code by using TFS proxy servers.Architectural IssuesLitware focuses on writing new code for customers. No resources are provided to refactor or remove existing code. Changes to the code base take a long time, as dependencies are not obvious to individual developers.Merge operations of the code often take months and involve many developers. Code merging frequently introduces bugs that are difficult to locate and resolve.Customers report that ownership costs of the retirement fund management system increase continually. The need to merge unrelated code makes even minor code changes expensive.Customers report that bug reporting is overly complex.Planned changesLitware plans to develop a new suite of applications for investment planning. The investment planning applications will require only minor integration with the existing retirement fund management system.The investment planning applications suite will include one multi-tier web application and two iOS mobile application. One mobile application will be used by employees; the other will be used by customers.Litware plans to move to a more agile development methodology. Shared code will be extracted into a series of packages.Litware has started an internal cloud transformation process and plans to use cloud-based services whenever suitable.Litware wants to become proactive in detecting failures, rather than always waiting for customer bug reports.Technical requirementsThe company’s investment planning applications suite must meet the following requirements:New incoming connections through the firewall must be minimized.Members of a group named Developers must be able to install packages.The principle of least privilege must be used for all permission assignments.A branching strategy that supports developing new functionality in isolation must be used.Members of a group named Team Leaders must be able to create new packages and edit the permissions of package feeds. Visual Studio App Center must be used to centralize the reporting of mobile application crashes and device types in use. By default, all releases must remain available for 30 days, except for production releases, which must be kept for 60 days. Code quality and release quality are critical. During release, deployments must not proceed between stages if any active bugs are logged against the release. The mobile applications must be able to call the share pricing service of the existing retirement fund management system. Until the system is upgraded, the service will only support basic authentication over HTTPS. The required operating system configuration for the test servers changes weekly. Azure Automation State Configuration must be used to ensure that the operating system on each test server is configured the same way when the servers are created and checked periodically.Current Technical IssueThe test servers are configured correctly when first deployed, but they experience configuration drift over time. Azure Automation State Configuration fails to correct the configurations.Azure Automation State Configuration nodes are registered by using the following command. Microsoft AZ-400 image Question 2 86870 10022024015257000000

Microsoft AZ-400 image Question 2 86870 10022024015257000000

You need to configure a cloud service to store the secrets required by the mobile applications to call the share pricing service. What should you include in the solution? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.Hot Area: Microsoft AZ-400 image Question 2 86870 10022024015257000000

Hot Area:Answer: Microsoft AZ-400 image Question 2 86870 10022024015257000000

Accepted Answer

Answer

Question 3

DRAG DROPWhich package feed access levels should be assigned to the Developers and Team Leaders groups for the investment planning applications suite? To answer, drag the appropriate access levels to the correct groups. Each access level may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.NOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Question 4

HOTSPOTCase StudyThis is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next sections of the exam. After you begin a new section, you cannot return to this section.To start the case studyTo display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.Application ArchitectureThe company’s primary application is a single monolithic retirement fund management system based on ASP.NET web forms that use logic written in VB.NET. Some new sections of the application are written in C#.Variations of the application are created for individual customers. Currently, there are more than 80 live code branches in the application’s code base.The application was developed by using Microsoft Visual Studio. Source code is stored in Team Foundation Server (TFS) in the main office. The branch offices access the source code by using TFS proxy servers.Architectural IssuesLitware focuses on writing new code for customers. No resources are provided to refactor or remove existing code. Changes to the code base take a long time, as dependencies are not obvious to individual developers.Merge operations of the code often take months and involve many developers. Code merging frequently introduces bugs that are difficult to locate and resolve. Customers report that ownership costs of the retirement fund management system increase continually. The need to merge unrelated code makes even minor code changes expensive.Customers report that bug reporting is overly complex.Planned changesLitware plans to develop a new suite of applications for investment planning. The investment planning applications will require only minor integration with the existing retirement fund management system.The investment planning applications suite will include one multi-tier web application and two iOS mobile application. One mobile application will be used by employees; the other will be used by customers.Litware plans to move to a more agile development methodology. Shared code will be extracted into a series of packages.Litware has started an internal cloud transformation process and plans to use cloud-based services whenever suitable.Litware wants to become proactive in detecting failures, rather than always waiting for customer bug reports.Technical requirementsThe company’s investment planning applications suite must meet the following requirements:New incoming connections through the firewall must be minimized.Members of a group named Developers must be able to install packages.The principle of least privilege must be used for all permission assignments.A branching strategy that supports developing new functionality in isolation must be used.Members of a group named Team Leaders must be able to create new packages and edit the permissions of package feeds.Visual Studio App Center must be used to centralize the reporting of mobile application crashes and device types in use.By default, all releases must remain available for 30 days, except for production releases, which must be kept for 60 days.Code quality and release quality are critical. During release, deployments must not proceed between stages if any active bugs are logged against the release.The mobile applications must be able to call the share pricing service of the existing retirement fund management system. Until the system is upgraded, the service will only support basic authentication over HTTPS.The required operating system configuration for the test servers changes weekly. Azure Automation State Configuration must be used to ensure that the operating system on each test server is configured the same way when the servers are created and checked periodically.Current Technical IssueThe test servers are configured correctly when first deployed, but they experience configuration drift over time. Azure Automation State Configuration fails to correct the configurations.Azure Automation State Configuration nodes are registered by using the following command.<img alt="Microsoft AZ-400 image Question 1 86814 10022024015257000000"   width="393" height="82" src="https://examgecko.com/getfile/26690fd2-89ea-420c-8165-26f55df45b3f">How should you complete the code to initialize App Center in the mobile application? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Question 5

HOTSPOTYou need to configure the alert for VM1. The solution must meet the technical requirements.Which two settings should you configure? To answer, select the appropriate settings in the answer area.NOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Question 6

You need to perform the GitHub code migration. The solution must support the planned changes for the DevOps environment.What should you use?

Accepted Answer

git-tfs

Answer

git clone

Answer

GitHub Importer

Answer

Import repository in Azure Repos

Question 7

DRAG DROPYou need to replace the existing DevOps tools to support the planned changes.What should you use? To answer, drag the appropriate tools to the correct targets. Each tool may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.NOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Question 8

DRAG DROPYou are configuring the Azure DevOps dashboard. The solution must meet the technical requirements.Which widget should you use for each metric? To answer, drag the appropriate widgets to the correct metrics. Each widget may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.NOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Question 9

You plan to deploy a new database environment. The solution must meet the technical requirements. You need to prepare the database for the deployment. How should you format the export?

Accepted Answer

DACPAC

Answer

NDF

Answer

MDF

Answer

BACPAC

Question 10

You need to meet the technical requirements for monitoring App1. What should you use?

Accepted Answer

Azure Application Insights

Answer

Splunk

Answer

Azure Advisor

Answer

App Service logs

Question 11

You need to the merge the POC branch into the default branch. The solution must meet the technical requirements. Which command should you run?

Accepted Answer

get rebase

Answer

get push

Answer

get merge -- allow-unrelated-histories

Answer

get merge --sqash

Question 12

You need to meet the technical requirements for controlling access to Azure DevOps.What should you use?

Accepted Answer

conditional access policies in Azure AD

Answer

Azure Multi-Factor Authentication (MFA)

Answer

on-premises firewall rules

Answer

Azure role-based access control (Azure RBAC)

Question 13

You need to configure Azure Pipelines to control App2 builds.Which authentication method should you use?

Accepted Answer

personal access token (PAT)

Answer

Windows NTLM

Answer

certificate

Answer

SAML

Question 14

DRAG DROPYou need to configure authentication for App1. The solution must support the planned changes.Which three actions should you perform in sequence? To answer, move all actions from the list of actions to the answer area and arrange them in the correct order.

Accepted Answer

Answer

Question 15

You add the virtual machines as managed nodes in Azure Automation State Configuration.You need to configure the managed computers in Pool7.What should you do next?

Accepted Answer

Run the Register-AzureRmAutomationDscNode Azure Powershell cmdlet.

Answer

Modify the RefreshMode property of the Local Configuration Manager (LCM).

Answer

Modify the ConfigurationMode property of the Local Configuration Manager (LCM).

Answer

Install PowerShell Core.

Question 16

DRAG DROPCase StudyThis is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next sections of the exam. After you begin a new section, you cannot return to this section.To start the case studyTo display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.BackgroundContoso, Ltd. is a manufacturing company that has a main office in Chicago.Contoso plans to improve its IT development and operations processes by implementing Azure DevOps principles. Contoso has an Azure subscription and creates an Azure DevOps organization.The Azure DevOps organization includes:The Docker extensionA deployment pool named Pool7 that contains 10 Azure virtual machines that run Windows Server 2019The Azure subscription contains an Azure Automation account.Contoso plans to create projects in Azure DevOps as shown in the following table.<img alt="Microsoft AZ-400 image Question 2 86816 10022024015257000000"   width="529" height="309" src="https://examgecko.com/getfile/330b8e42-07bd-4eac-b04e-0fe0efb00906">Technical requirementsContoso identifies the following technical requirements:Implement build agents for Project1.Whenever possible, use Azure resources.Avoid using deprecated technologies.Implement a code flow strategy for Project2 that will:-Enable Team2 to submit pull requests for Project2.-Enable Team2 to work independently on changes to a copy of Project2.-Ensure that any intermediary changes performed by Team2 on a copy of Project2 will be subject to the same restrictions as the ones defined in the build policy of Project2. Whenever possible implement automation and minimize administrative effort.Implement Project3, Project5, Project6, and Project7 based on the planned changesImplement Project4 and configure the project to push Docker images to Azure Container Registry.You need to implement the code flow strategy for Project2 in Azure DevOps.Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

Accepted Answer

Answer

Question 17

DRAG DROPCase StudyThis is a case study. Case studies are not timed separately. You can use as much exam time as you would like to complete each case. However, there may be additional case studies and sections on this exam. You must manage your time to ensure that you are able to complete all questions included on this exam in the time provided.To answer the questions included in a case study, you will need to reference information that is provided in the case study. Case studies might contain exhibits and other resources that provide more information about the scenario that is described in the case study. Each question is independent of the other question on this case study.At the end of this case study, a review screen will appear. This screen allows you to review your answers and to make changes before you move to the next sections of the exam. After you begin a new section, you cannot return to this section.To start the case studyTo display the first question on this case study, click the Next button. Use the buttons in the left pane to explore the content of the case study before you answer the questions. Clicking these buttons displays information such as business requirements, existing environment, and problem statements. If the case study has an All Information tab, note that the information displayed is identical to the information displayed on the subsequent tabs. When you are ready to answer a question, click the Question button to return to the question.BackgroundContoso, Ltd. is a manufacturing company that has a main office in Chicago.Contoso plans to improve its IT development and operations processes by implementing Azure DevOps principles. Contoso has an Azure subscription and creates an Azure DevOps organization.The Azure DevOps organization includes:The Docker extensionA deployment pool named Pool7 that contains 10 Azure virtual machines that run Windows Server 2019The Azure subscription contains an Azure Automation account.Contoso plans to create projects in Azure DevOps as shown in the following table.<img alt="Microsoft AZ-400 image Question 3 86817 10022024015257000000"   width="529" height="309" src="https://examgecko.com/getfile/17dbfeaa-474a-402c-a0a0-d1e41be11082">Technical requirementsContoso identifies the following technical requirements:Implement build agents for Project1.Whenever possible, use Azure resources.Avoid using deprecated technologies.Implement a code flow strategy for Project2 that will:-Enable Team2 to submit pull requests for Project2.-Enable Team2 to work independently on changes to a copy of Project2.-Ensure that any intermediary changes performed by Team2 on a copy of Project2 will be subject to the same restrictions as the ones defined in the build policy of Project2. Whenever possible implement automation and minimize administrative effort.Implement Project3, Project5, Project6, and Project7 based on the planned changesImplement Project4 and configure the project to push Docker images to Azure Container Registry.You need to configure Azure Automation for the computers in Group7.Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order. Select and Place:

Accepted Answer

Answer

Question 18

You have an Azure subscription that contains multiple Azure services.You need to send an SMS alert when scheduled maintenance is planned for the Azure services.Which two actions should you perform? Each correct answer presents part of the solution.NOTE: Each correct selection is worth one point.

Accepted Answer

Create an Azure Service Health alert.

Accepted Answer

Create and configure an action group.

Answer

Enable Azure Security Center.

Answer

Create and configure an Azure Monitor alert rule.

Question 19

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You have an Azure DevOps organization named Contoso and an Azure subscription. The subscription contains an Azure virtual machine scale set named VMSS1 that is configured for autoscaling.You have a project in Azure DevOps named Project1. Project1 is used to build a web app named App1 and deploy App1 to VMSS1.You need to ensure that an email alert is generated whenever VMSS1 scales in or out.Solution: From Azure Monitor, configure the autoscale settings.Does this meet the goal?

Accepted Answer

No

Answer

Yes

Question 20

You configure Azure Application Insights and the shared service plan tier for a web app.You enable Smart Detection.You confirm that standard metrics are visible in the logs, but when you test a failure, you do not receive a Smart Detection notification.What prevents the Smart Detection notification from being sent?

Accepted Answer

Smart Detection uses the first 24 hours to establish the normal behavior of the web app.

Answer

You must enable the Snapshot Debugger for the web app.

Answer

The web app is configured to use the shared service plan tier.

Answer

You must restart the web app before Smart Detection is enabled.

Question 21

HOTSPOTYou have an Azure subscription that contains the resources shown in the following table.<img alt="Microsoft AZ-400 image Question 4 87060 10022024015257000000"   width="389" height="105" src="https://examgecko.com/getfile/e495d17c-4a12-461e-a141-6f8591044cb1">You plan to create a linked service in DF1. The linked service will connect to SQL1 by using Microsoft SQL Server authentication. The password for the SQL Server login will be stored in KV1.You need to configure DF1 to retrieve the password when the data factory connects to SQL1. The solution must use the principle of least privilege.How should you configure DF1? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Question 22

You have several Azure Active Directory (Azure AD) accounts.You need to ensure that users use multi-factor authentication (MFA) to access Azure apps from untrusted networks. What should you configure in Azure AD?

Accepted Answer

conditional access

Answer

access reviews

Answer

managed identities

Answer

entitlement management

Question 23

HOTSPOTYour company uses GitHub for source control. GitHub repositories store source code and store process documentation. The process documentation is saved as Microsoft Word documents that contain simple flow charts stored as .bmp files. You need to optimize the integration and versioning of the process documentation and the flow charts. The solution must meet the following requirements:Store documents as plain text.Minimize the number of files that must be maintained.Simplify the modification, merging, and reuse of flow charts.Simplify the modification, merging, and reuse of documents.

Accepted Answer

Answer

Question 24

You have a project in Azure DevOps that has a release pipeline.You need to integrate work item tracking and an Agile project management system to meet the following requirements:Ensure that developers can track whether their commits are deployed to production. Report the deployment status. Minimize integration effort.Which system should you use?

Accepted Answer

Jira

Answer

Asana

Answer

Basecamp

Answer

Trello

Question 25

You plan to onboard 10 new developers.You need to recommend a development environment that meets the following requirements:Integrates with GitHubProvides integrated debugging toolsSupports remote workers and hot-desking environmentsSupports developers who use browsers, tablets, and ChromebooksWhat should you recommend?

Accepted Answer

Github Studio Codespaces

Answer

VS Code

Answer

Xamarin Studio

Answer

MonoDevelop

Question 26

HOTSPOTYou plan to use Desired State Configuration (DSC) to maintain the configuration state of virtual machines that run Windows Server.You need to perform the following:Install Internet Information Services (IIS) on the virtual machines. Update the default home page of the IIS web server. How should you configure the DSC configuration file? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Question 27

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You need to recommend an integration strategy for the build process of a Java application. The solution must meet the following requirements:The build must access an on-premises dependency management system.The build outputs must be stored as Server artifacts in Azure DevOps. The source code must be stored in a get repository in Azure DevOps.Solution: Configure the build pipeline to use a Microsoft-hosted agent pool running the Windows Server 2022 with Visual Studio 2022 image. Include the Java Tool Installer task in the build pipeline.Does this meet the goal?

Accepted Answer

No

Answer

Yes

Question 28

You have a project in Azure DevOps.You create the following YAML template named Template1.yml.steps:- script: npm install- script: yarn install- script: npm run compileYou create the following pipeline named File1.yml.parameters: usersteps: - task: MyTask@1- script: echo DoneYou need to ensure that Template1.yaml runs before File1.yml.How should you update File1.yml?

Accepted Answer

extends: template: templatel.yml parameters: usersteps:- task: MyTask@1 - script: echo Done

Answer

parameters: usersteps: extends: template: template1.yml- task: MyTask@1 - script: echo Done

Answer

template: template1.yml parameters: usersteps:- task: MyTask@1 - script: echo Done

Answer

parameters: usersteps: - template: templatel.yml- task: MyTask@1 - script: echo Done

Question 29

You have an Azure solution that contains a build pipeline in Azure Pipelines.You experience intermittent delays before the build pipeline starts.You need to reduce the time it takes to start the build pipeline.What should you do?

Accepted Answer

Purchase an additional parallel job.

Answer

Enable self-hosted build agents.

Answer

Create a new agent pool.

Answer

Split the build pipeline into multiple stages.

Question 30

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.You need to recommend an integration strategy for the build process of a Java application. The solution must meet the following requirements:The build must access an on-premises dependency management system.The build outputs must be stored as Server artifacts in Azure DevOps. The source code must be stored in a get repository in Azure DevOps.Solution: Configure the build pipeline to use a Microsoft-hosted agent pool running a Linux image. Include the Java Tool Installer task in the build pipeline.Does this meet the goal?

Accepted Answer

Yes

Answer

No

Question 31

DRAG DROPYou are using the Dependency Tracker extension in a project in Azure DevOps.You generate a risk graph for the project.What should you use in the risk graph to identify the number of dependencies and the risk level of the project? To answer, drag the appropriate elements to the correct data points. Each element may be used once, more than once, or not at all. Youmay need to drag the split bar between panes or scroll to view content.NOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Question 32

You use release pipelines in Azure Pipelines to deploy an app. Secrets required be the pipeline are stored as pipeline variables. Logging of commands is enabled for the Azure Pipelines agent. You need to prevent the values of the secrets from being logged.What should you do?

Accepted Answer

Store the secrets in the environment variables instead of the pipeline variables.

Answer

Pass the secrets on the command line instead of in the pipeline variables.

Answer

Apply a prefix of secret to the name of the variables.

Answer

Echo the values of the secrets to the command line.

Question 33

You are creating a YAML-based Azure pipeline to deploy an Azure Data factory instance that has the following requirements;• If a Data Factory instance exists already, the instance must be overwritten.• No other resources in a resource group named Fabrikam must be affected.How should you complete the code? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.<img alt="Microsoft AZ-400 image Question 16 87072 10022024015257000000"   width="623" height="229" src="https://examgecko.com/getfile/6ffce10d-fdde-4943-b92f-e1c13ea7dc4b">

Accepted Answer

Question 34

DRAG DROPYou have an Azure Kubernetes Service (AKSJ pod that hosts an app named App1.You need to configure the AKS container to restart automatically if the container stops responding. The solution must check the status of App1 once every three seconds.How should you complete the deployment? To answer, drag the appropriate values to the correct targets. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view contentNOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Question 35

DRAG DROPYour company has a project in Azure DevOps named Project1.All the developers at the company have Windows 10 devices.You need to create a get repository for Project1. The solution must meet the following requirements:• Support large binary files.• Store binary files outside of the repository.• Use a standard get workflow to maintain the metadata of the binary files by using commits to the repository.

Accepted Answer

Answer

Question 36

You have a GitHub repository that contains the source code for an app.You need to identify all the changes made between versions 1.4.16 and 1.6.12 of the source code.How should you complete the get command? To answer, select the appropriate options in the answer area. get _________ ____________ | helper-script > changes.txtNOTE: Each correct selection is worth one point.<img alt="Microsoft AZ-400 image Question 19 87075 10022024015257000000"   width="1230" height="109" src="https://examgecko.com/getfile/a8077f6d-0d7a-4dc6-aaee-2fc84ba0670f">

Accepted Answer

get diff v1.4.16 v1.6.12 | helper-script > changes.txt

Question 37

You have an Azure virtual machine that is monitored by using Azure Monitor.The virtual machine has the Azure Log Analytics agent installed.You plan to deploy the Service Map solution from Azure Marketplace.What should you deploy to the virtual machine to support the Service Map solution?

Accepted Answer

the Dependency agent

Answer

the Telegraf agent

Answer

the Azure Monitor agent

Answer

the Windows Azure diagnostics extension (WAD)

Question 38

DRAG DROPYou need to deploy a new project in Azure DevOps that has the following requirements:• The lead developer must be able to create repositories, manage permissions, manage policies, and contribute to the repository. • Developers must be able to contribute to the repository and create branches, but NOT bypass policies when pushing builds. • Project managers must only be able to view the repository.• The principle of least privilege must be used.You create a new Azure DevOps project team for each role.To which Azure DevOps groups should you add each team? To answer, drag the appropriate groups to the correct teams. Each group may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.NOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Question 39

You use GitHub for source control and project-related discussions.You receive a notification when an entry is made to any team discussion.You need to ensure that you receive email notifications only for discussions in which you commented or in which you are mentioned. Which two Notifications settings should you clear? Each correct answer presents part of the solution. NOTE: Each correct selection is worth one point.

Accepted Answer

Automatically watch repositories

Accepted Answer

Watching

Answer

Participating

Answer

Automatically watch teams

Question 40

DRAG DROPYou have an Azure Repos repository named repo1.You need to clone repo1. The solution must clone only a directory named src/web.How should you complete the script? To answer, drag the appropriate values to the correct targets,Each value may be used once, more than once, or not at all. You may need to drag the spirt bar between panes or scroll to view content. NOTE: Each correct selection is worth one point

Accepted Answer

Answer

Microsoft AZ-400 Practice Test 8

Microsoft AZ-400 Practice Tests