Ask Question
CCST-Networking: Cisco Certified Support Technician (CCST) Networking
The Cisco Certified Support Technician Networking (CCST-Networking) exam is essential for professionals aiming to specialize in networking support and solutions. Our comprehensive resource for CCST-Networking practice tests, shared by individuals who have successfully passed the exam, provides realistic scenarios and invaluable insights to enhance your exam preparation.
Why Use CCST-Networking Practice Test?
-
Real Exam Experience: Our practice test accurately replicates the format and difficulty of the actual CCST-Networking exam, providing you with a realistic preparation experience.
-
Identify Knowledge Gaps: Practicing with these tests helps you identify areas where you need more study, allowing you to focus your efforts effectively.
-
Boost Confidence: Regular practice with exam-like questions builds your confidence and reduces test anxiety.
-
Track Your Progress: Monitor your performance over time to see your improvement and adjust your study plan accordingly.
Key Features of CCST-Networking Practice Test:
-
Up-to-Date Content: Our community ensures that the questions are regularly updated to reflect the latest exam objectives and technology trends.
-
Detailed Explanations: Each question comes with detailed explanations, helping you understand the correct answers and learn from any mistakes.
-
Comprehensive Coverage: The practice test covers all key topics of the CCST-Networking exam, including network fundamentals, protocols, security, and troubleshooting.
-
Customizable Practice: Create your own practice sessions based on specific topics or difficulty levels to tailor your study experience to your needs.
Exam number: CCST-Networking
Exam name: Cisco Certified Support Technician Networking (CCST-Networking)
Length of test: 90 minutes
Exam format: Multiple-choice, drag-and-drop, fill-in-the-blank, testlet, simlet, and simulation questions
Exam language: English
Number of questions in the actual exam: 55-65 questions
Passing score: Varies, typically around 750-850 out of 1000
Use the member-shared Cisco CCST-Networking Practice Test to ensure you’re fully prepared for your certification exam. Start practicing today and take a significant step towards achieving your certification goals!
Related questions
What is the purpose of assigning an IP address to the management VLAN interface on a Layer 2 switch?
To enable the switch to act as a default gateway for the attached devices
To enable the switch to resolve URLs for the attached the devices
To enable the switch to provide DHCP services to other switches in the network
To enable access to the CLI on the switch through Telnet or SSH
The primary purpose of assigning an IP address to the management VLAN interface on a Layer 2 switch is to facilitate remote management of the switch. By configuring an IP address on the management VLAN, network administrators can access the switch's Command Line Interface (CLI) remotely using protocols such as Telnet or Secure Shell (SSH). This allows for convenient configuration changes, monitoring, and troubleshooting without needing physical access to the switch1.
* Understanding the Management VLAN
* Cisco - VLAN Configuration Guide
* Remote Management of Switches
Assigning an IP address to the management VLAN interface (often the VLAN 1 interface by default) on a Layer 2 switch allows network administrators to remotely manage the switch using protocols such as Telnet or SSH. This IP address does not affect the switch's ability to route traffic between VLANs but provides a means to access and configure the switch through its Command Line Interface (CLI).
* A: The switch does not act as a default gateway; this is typically a function of a Layer 3 device like a router.
* B: The switch does not resolve URLs; this is typically a function of DNS servers.
* C: The switch can relay DHCP requests but does not typically provide DHCP services itself; this is usually done by a dedicated DHCP server or router.
Thus, the correct answer is D. To enable access to the CLI on the switch through Telnet or SSH.
* Cisco VLAN Management Overview
* Cisco Catalyst Switch Management
Which device protects the network by permitting or denying traffic based on IP address, port number, or application?
Unlock Premium Member
Which standard contains the specifications for Wi-Fi networks?
GSM
LTE
IEEE 802.11
IEEE 802.3
EIA/TIA 568A
The IEEE 802.11 standard contains the specifications for Wi-Fi networks. It is a set of media access control (MAC) and physical layer (PHY) specifications for implementing wireless local area network (WLAN) computer communication in various frequencies, including but not limited to 2.4 GHz, 5 GHz, and 6 GHz1. This standard is maintained by the Institute of Electrical and Electronics Engineers (IEEE) and is commonly referred to as Wi-Fi. The standard has evolved over time to include several amendments that improve speed, range, and reliability of wireless networks.
* The Most Common Wi-Fi Standards and Types, Explained
* 802.11 Standards Explained: 802.11ax, 802.11ac, 802.11b/g/n, 802.11a
* Wi-Fi Standards Explained - GeeksforGeeks
=========================
Which command will display all the current operational settings configured on a Cisco router?
show protocols
show startup-config
show version
show running-config
The show running-config command is used on a Cisco router to display the current operational settings that are actively configured in the router's RAM. This command outputs all the configurations that are currently being executed by the router, which includes interface configurations, routing protocols, access lists, and other settings. Unlike show startup-config, which shows the saved configuration that the router will use on the next reboot, show running-config reflects the live, current configuration in use.
show running-config: This command displays the current configuration running on the router. It includes all the operational settings and configurations applied to the router.
show protocols: This command shows the status of configured protocols on the router but not the entire configuration.
show startup-config: This command displays the configuration saved in NVRAM, which is used to initialize the router on startup, but not necessarily the current running configuration.
show version: This command provides information about the router's software version, hardware components, and uptime but does not display the running configuration.
Cisco IOS Commands: Cisco IOS Commands
In the network shown in the following graphic, Switch1 is a Layer 2 switch.
PC-A sends a frame to PC-C. Switch1 does not have a mapping entry for the MAC address of PC-C. Which action does Switch1 take?
Switch1 queries Switch2 for the MAC address of PC-C.
Switch1 drops the frame and sends an error message back to PC-A.
Switch1 floods the frame out all active ports except port G0/1.
Switch1 sends an ARP request to obtain the MAC address of PC-C.
In a network, when a Layer 2 switch (like Switch1) receives a frame destined for a MAC address that is not in its MAC address table, it performs a flooding operation. This means the switch will send the frame out of all ports except the port on which the frame was received. This flooding ensures that if the destination device is connected to one of the other ports, it will receive the frame and respond, allowing the switch to learn its MAC address.
A . Switch1 queries Switch2 for the MAC address of PC-C: This does not happen in Layer 2 switches; they do not query other switches for MAC addresses.
A . Switch1 drops the frame and sends an error message back to PC-A: This is not the default behavior for unknown unicast frames.
D . Switch1 sends an ARP request to obtain the MAC address of PC-C: ARP is used by devices to map IP addresses to MAC addresses, not by switches to find unknown MAC addresses.
Thus, the correct answer is B. Switch1 floods the frame out all active ports except port G0/1.
Cisco Layer 2 Switching Overview
Switching Mechanisms (Cisco)
HOTSPOT
Computers in a small office are unable to access companypro.net. You run the ipconfig command on one of the computers. The results are shown in the exhibit.
You need to determine if you can reach the router.
Which command should you use? Complete the command by selecting the correct options from each drop-down lists.
A user reports that a company website is not available. The help desk technician issues a tracert command to determine if the server hosting the website is reachable over the network. The output of the command is shown as follows:
What can you tell from the command output?
The router at hop 3 is not forwarding packets to the IP address 192.168.1.10.
The server address 192.168.1.10 is being blocked by a firewall on the router at hop 3.
The server with the address 192.168.1.10 is reachable over the network.
Requests to the web server at 192.168.1.10 are being delayed and time out.
The tracert command output shows the path taken to reach the destination IP address, 192.168.1.10. The command output indicates:
* Hops 1 and 2 are successfully reached.
* Hop 3 times out, meaning the router at hop 3 did not respond to the tracert request. However, this does not necessarily indicate a problem with forwarding packets, as some routers may be configured to block or not respond to ICMP requests.
* Hops 4 and 5 are successfully reached, with hop 5 being the destination IP 192.168.1.10, indicating that the server is reachable.
Thus, the correct answer is C. The server with the address 192.168.1.10 is reachable over the network.
* Cisco Traceroute Command
* Understanding Traceroute
The tracert command output indicates that the server with the address 192.168.1.10 is reachable over the network. The asterisk (*) at hop 3 suggests that the probe sent to that hop did not return a response, which could be due to a variety of reasons such as a firewall blocking ICMP packets or the router at that hop being configured not to respond to ICMP requests. However, since the subsequent hops (4 and 5) are showing response times, it means that the packets are indeed getting through and the server is reachable12.
* How to Use Traceroute Command to Read Its Results
* How to Use the Tracert Command in Windows
Which two statements are true about the IPv4 address of the default gateway configured on a host? (Choose 2.)
Note: You will receive partial credit for each correct selection.
A host is given the IP address 172.16.100.25 and the subnet mask 255.255.252.0.
What is the CIDR notation for this address?
Which information is included in the header of a UDP segment?
Export
If you didn't receive an email within 5 minutes, you should submit a support request to [email protected].
|
BASIC - 1 Month
$
10
Full latest questions
No CAPTCHA
New Updates
Export to VPLUS
Export to PDF - All questions
Team support
|
PLUS - 2 Months
$
15
Full latest questions
No CAPTCHA
New Updates
Export to VPLUS
Export to PDF - All questions
Team support
|
PRO - 6 Months
$
40
Full latest questions
No CAPTCHA
New Updates
Export to VPLUS
Export to PDF - All questions
Team support
|
Full latest questions
No CAPTCHA
New Updates
Export to VPLUS
Export to PDF - All questions
Team support
Full latest questions
No CAPTCHA
New Updates
Export to VPLUS
Export to PDF - All questions
Team support
Full latest questions
No CAPTCHA
New Updates
Export to VPLUS
Export to PDF - All questions
Team support
Practice Tests
Selling illegal goods, money scams etc.
Serious attack on a group.
Harassing an individual (including doxing)
Threatening or glorifying violence or serious harm, including self-harm
Nudity/Sexual content
Sexually explicit or suggestive imagery or writing involving minors
Sexually explicit or suggestive imagery or writing involving non-consenting adults or non-humans
Reusing content without attribution (link and blockquotes)
Not in English or has very bad formatting, grammar, and spelling
Author's credential is offensive, spam, or impersonation
Ex. Illegal content, incomplete question...
Question