ExamGecko
Login
Home / Cisco / 300-510 / List of questions
Ask Question

Cisco 300-510 Practice Test - Questions Answers, Page 2

Add to Whishlist

List of questions

Question 11

Report Export Collapse

Which statement about enabling segment routing for IGPs is true?

Segment routing must first be enabled under then routing process and then globally

Segment routing must first be enabled under then routing process and then globally

Segment routing must first be enabled globally and then under the routing process

Segment routing must first be enabled globally and then under the routing process

Segment routing can be enabled only under the routing process

Segment routing can be enabled only under the routing process

Segment routing can be enabled only globally

Segment routing can be enabled only globally

Suggested answer: B
Explanation:

book/sr-ospfv2-node-sid.html

asked 01/04/2025
Aidan Lear
57 questions

Question 12

Report Export Collapse

Which task is performed when troubleshooting LDP?

Execute the ping utility to generate information about the MAC addresses used along the path

Execute the ping utility to generate information about the MAC addresses used along the path

Verify that MPLS is disabled globally and enabled on the necessary interfaces in a per-interface basis

Verify that MPLS is disabled globally and enabled on the necessary interfaces in a per-interface basis

Execute the traceroute utility to generate information about the labels used along the path

Execute the traceroute utility to generate information about the labels used along the path

Verify that Cisco Express Forwarding has been disabled on the network

Verify that Cisco Express Forwarding has been disabled on the network

Suggested answer: C
asked 01/04/2025
Tristan Zerner
52 questions

Question 13

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 13 63879133849201719046570

XR1 and XR2 are sending the prefix 10.11.11.0/24 to XR3. A configured policy on XR1 is incorrectly prepending AS path 11 11 12 12 onto this prefix. A network operator wants to add a policy onto XR3 that will not allow the falsely prepending prefix from being installed. Which policy configuration applied to the XR3 neighbor configuration for XR1 can accomplish this requirement without impact to other or future received routes?

Cisco 300-510 image Question 13 63879133849201719046570

Cisco 300-510 image Question 13 63879133849201719046570

Option A

Option A

Option B

Option B

Option C

Option C

Option D

Option D

Suggested answer: D
Explanation:

b_routing_cr41crs/b_routing_cr41crs_chapter_01000.html#wp3850885229

asked 01/04/2025
Andrea Di Giuseppe
41 questions

Question 14

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 14 63879133849217303362932

Router 1 is connected to router 2 on interface TenGigE0/1. Which interface provides the alternate path to 172.16.200.9/32 when the link between router 1 and router 2 goes down?

TenGigE0/1 interface provides the alternate path

TenGigE0/1 interface provides the alternate path

A backup path must be statically installed

A backup path must be statically installed

TenGigE0/2 interface provides the alternate path

TenGigE0/2 interface provides the alternate path

A primary path must be manually installed

A primary path must be manually installed

Suggested answer: C
asked 01/04/2025
Andrew Vogel
48 questions

Question 15

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 15 63879133849232927827052

A network operator wants to expand the segment routing global block in upcoming maintenance. The operator must ensure that the changes to the segment routing global block have no adverse impacts on the prefix-sid associated with the loopback0 interface used within the OSPF domain.

Which command can the operator use to enforce R2 to have a strict prefix-sid assignment to loopback0?

Cisco 300-510 image Question 15 63879133849232927827052

Option A

Option A

Option B

Option B

Option C

Option C

Option D

Option D

Suggested answer: C
asked 01/04/2025
chengbin lin
50 questions

Question 16

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 16 63879133849232927827052

Router 1 is a core ABR in a Cisco Unified MPLS environment. All of the router 1 BGP

peers are established, but traffic between customers is failing. Which BGP configuration must be added to the configuration?

It must be configured for graceful restart

It must be configured for graceful restart

It must be configured with a route reflector

It must be configured with a route reflector

It must be configured with send labels

It must be configured with send labels

It must be configured with PIC edge

It must be configured with PIC edge

Suggested answer: C
asked 01/04/2025
Alejandro Ramirez Cuesta
41 questions

Question 17

Report Export Collapse

What can be used to determine a path from the head-end to a tail-end router when implementing SR-TE with a head-end, with little information on the network topology?

traffic controller

traffic controller

path computation engine

path computation engine

tail-end router

tail-end router

SNMP server

SNMP server

Suggested answer: B
asked 01/04/2025
Kunle Fodeke
55 questions

Question 18

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 18 63879133849248552691171

R1 is directly connected to R2 and R3. R1 is in BGP AS 123, R2 is in BGP AS 2, and R3

is in BGP AS 3. Assume that there is no connectivity issue between R1, R2 and R1, R3. Which result between

BGP peers R1, R2 and R1, R3 is true?

The BGP session does not come up between R1 and R2 and between R1 and R3.

The BGP session does not come up between R1 and R2 and between R1 and R3.

The BGP session comes up between R1 and R2 and between R1 and R3.

The BGP session comes up between R1 and R2 and between R1 and R3.

The BGP session comes up between R1 and R3, but not between R1 and R2.

The BGP session comes up between R1 and R3, but not between R1 and R2.

The BGP session comes up between R1 and R2, but not between R1 and R3.

The BGP session comes up between R1 and R2, but not between R1 and R3.

Suggested answer: B
asked 01/04/2025
Joseph Lewis
55 questions

Question 19

Report Export Collapse

Refer to the exhibit.

Cisco 300-510 image Question 19 63879133849248552691171

Router 1 has established an SR-TE tunnel with router 2. Which statement describes this configuration?

Router 1 has a list of labels used to explicitly lay out a path to router 2.

Router 1 has a list of labels used to explicitly lay out a path to router 2.

Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.

Router 1 and router 2 have a bidirectional tunnel set up with dynamic path selection.

Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.

Router 1 is the head-end tunnel and has dynamically chosen a path to router 2.

Router 2 is the head-end tunnel and has explicitly set a path to router 1.

Router 2 is the head-end tunnel and has explicitly set a path to router 1.

Suggested answer: C
asked 01/04/2025
Camrin Schroyer
37 questions

Question 20

Report Export Collapse

Which two conditions must be met before separate ISPs can provide interdomain multicast routing? (Choose two.)

Each ISP must configure MSDP to connect its individual multicast administrative domain to the domains at other ISPs.

Each ISP must configure MSDP to connect its individual multicast administrative domain to the domains at other ISPs.

Each ISP must dedicate a single router to handle multicast traffic between providers.

Each ISP must dedicate a single router to handle multicast traffic between providers.

Each ISP must replace its RP assignment with a global RP.

Each ISP must replace its RP assignment with a global RP.

Each ISP must configure its network to use PIM-DM.

Each ISP must configure its network to use PIM-DM.

Each ISP must support intradomain multicast routing.

Each ISP must support intradomain multicast routing.

Suggested answer: A, E
asked 01/04/2025
Aline Oliveira
45 questions
Total 269 questions
Go to page: of 27
Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

Refer to the exhibit. The service provider deployed segment routing in its core P2 is connected to P3 and P4 via a point-to-multipoint link as shown The service provider provides connectivity for a large enterprise with three main offices in different geographic regions Each office is connected via one of the three PEs The enterprise wants to implement multicast traffic across the service provider to stream mission-critical applications between sites The applications will be sourced from a server connected to the network through PE2 Which action must the network-engineering team take so that multicast traffic will flow between the enterprise sites over the point-to-multipoint link?
The engineering team at ISP_1 must improve network stability time and minimize the impact of routing instabilities from other domains to unicast transit services in the backbone R1 is part of an OSPF- enabled network, and acts as an ASBR connected via interface GiO/1 to the external domain The OSPF exponential backoff algorithm RFC 3623 with helper mode is already implemented on R1 Which additional configuration must the ISP_1 team apply to suppress routing instability for 3 minutes'?
Refer to the exhibit. A network engineer at a large ISP with an employee ID 4876 94 052 started to configure OSPF on two routers The engineer notices that router 1 learned about network 20 20 20 0/24 from router 2, but router 2 did not learn about 10.10 10.0/24 from router 1 Layer 2 and Layer 3 connectivity are working between the two routers and the physical connection between the devices is functioning. Which action must the engineer take to resolve the issue?
Which BGP well-known attributes are preserved between peers with a BGP confederation?
Which fact must a network architect consider when implementing IGMP in a multicast routing environment?
RPL has several fundamental capabilities that differ from those present in configurations oriented to traditional route maps Routing policy language introduces the notion of sets Which group of set types is valid in RPL?
What are two major differences between OSPF and IS-IS routing protocols? (Choose two.)
Refer to the exhibit. Early in the growth cycle of a small enterprise the network-engineering team implemented segment routing to support automation of the IPv4 network As the network grew organically more devices were added and the company migrated to SRv6 The company is now planning to significantly expand the number of hosts connected to R2 and R6 which will require further path manipulation Which action must the team take to customize the route that traffic takes between endpoints in the network?
Refer to the exhibit. EBGP peering is up between BGP AS 65101 and BGP AS 65201 The service provider expects traffic convergence within 300ms between the two autonomous systems but the network operations team sees that route and traffic convergence is too slow Which two actions improve the convergence time? (Choose two.)
Refer to the exhibit. AJI four routers on the network reside in the same data center The four routers are running IS-IS between them in Level 1 mode within an IPv4 network After a network engineer installed several new servers connected to R4, users connected via R1 reported they could not connect to applications on the servers The engineer has determined that R4 is receiving routes from R3 but it is failing to receive routes from R1 Which action must the engineer take to resolve the issue?