A customer is interested in a Synergy solution. They need 100 compute modules and expect the workload to double in two years.They ask for the minimum number of management ports they will need to connect Synergy frames into their management network.How should you reply?

FLMs from all frames connect into a management ring, and the management ring connects into their management network with two uplinks.

FLMs from all frames connect to two external switches, and these two switches connect into their management network.

Synergy solution only allows 15 frames to be interconnected, so growth in customer's workload is not supported.

The RJ-45 ports on the front of each frame are connected to an external switch, which is connected into their management network.

You propose an HPE 3PAR StoreServ 8200 array for a customer who needs 900 TiB raw storage space.After the proposal was created, the customer went through with a competitor acquisition. Now they need to accommodate 1600 TiB.What should you propose to the customer?

Instead of 3PAR StoreServ 8200 2-node configuration, propose an 8400 4-node configuration with the needed amount of drives.

Instead of 3PAR StoreServ 8200 2-node configuration, propose an 8400 2-node configuration with a 2-node upgrade and the needed amount of drives.

Upgrade the 3PAR StoreServ 8200 2-node configuration with four additional nodes and the needed amount of drives.

Upgrade the 3PAR StoreServ 8200 2-node configuration with Data Optimization Software Suite and the needed amount of drives.

A customer has the following design requirements:Support for 16Gb Fibre ChannelAll SAN elements must be managed by the SAN teamAll SAN elements need to be managed by the existing toolsWhich component must be included in the design to meet the customer's requirements?

Brocade 16Gb Fibre Channel SAN Switch Module for HPE Synergy

HPE Virtual Connect SE 16Gb FC Module for HPE Synergy

HPE Virtual Connect SE 40Gb FC Module for HPE Synergy

HPE Synergy 8Gb FC License Upgrade

Brocade 16Gb Fibre Channel SAN Switch Module for HPE Synergy

The customer has an HPE Nimble HF40.The customer's application needs have changed, and they now require more performance from their current storage solution.What should you do to address the customer's new requirements?

Add disks and SSDs to the current array.

Grow the FDR (flash-to-disk) ration by adding SSDs to the Dual Flash Carries (DFC).

Enable the HPE Advanced Data Services license to enable tiering.

Upgrade the existing controller pair with a higher model number.

Add disks and SSDs to the current array.

A customer needs a right-mix strategy and roadmap for hybrid-IT delivery that covers platform, operations, and brokering.Which HPE service should be recommended to meet the customer's requirements?

Advisory & Transformation Services

A customer wants to know why their servers should be configured in UEFI mode instead of legacy boot mode.What does UEFI in Gen10 support? (Choose two.)

Internet Small Computer Systems Interface (iSCSI) Software Initiator support

Non-Volatile Memory Express (NVMe) boot

Internet Small Computer Systems Interface (iSCSI) Software Initiator support

Trusted Platform Module (TPM) 1.0

Non-Volatile Memory Express (NVMe) boot

Refer to the Exhibit. A customer's requirements include minimal licensing and simple management. The data must be secured at rest. The solution must have the smallest footprint possible.Which component must be added to the bill of materials to meet these customer requirements?

HPE 3PAR 8400 Data Encryption E-LTU

HPE 3PAR All-in S-sys SW Current E-Media

HPE 3PAR Policy Manager Software E-LTU

HPE 3PAR 8400 All-inc Multi-sys SW E-LTU

HPE 3PAR 8400 Data Encryption E-LTU

A customer requires a new backup solution for their VMware and Hyper-V environment, stored on a 3PAR 8400. They request a solution that will move the backup data across their storage network and allow for copying backup data to 3rd party cloud providers.Which two components should you recommend? (Choose two.)

HPE StoreOnce 3640 with Catalyst

Microsoft Data Protection Manager

Microsoft Storage Spaces Direct

A customer is considering a hyperconverged solution to consolidate their current virtualization environment.Which question should you ask to determine whether SimpliVity is the correct platform?

How many VMs do you currently run?

Which SAN switches are in your current environment?

How many VMs do you currently run?

What is the storage protocol you currently use to access local drives?

Are you booting hypervisors over PXE?

A customer is requesting new leaf switches for their 40-server virtualization farm. Their servers are currently equipped with 25GbE NICs.Which switch family should you recommend?

HPE FlexFabric 5945 48SFP28 8QSFP28

HPE FlexFabric 12916E Switch with QSFP28 HB modules

HPE FlexFabric 5945 48SFP28 8QSFP28

HPE FlexFabric 5710 48XGT 2QSF28

You are offering a startup service of StoreOnce 3620 to a customer.Which customer need will require an additional Pointnext service?

installation of HPE StoreOnce Recovery Manager Central software

installation of hardware to the rack

creation of the installation plan

validation of the StoreOnce System operation

installation of HPE StoreOnce Recovery Manager Central software

You are designing a solution for a data-intensive application running on a ProLiant DL380 Gen10 server, where performance will be critical.Which tool should you use to validate that your design meets the workload requirements?

HPE Solid-State Drive Selector Tool

A customer is looking to better manage their HPE Synergy-based VMware environment.Which VMware extension will reveal critical trends in their environment?

HPE OneView for VMware vRealize Operations

HPE OneView for VMware Operations Manager

HPE OneView for VMware vCenter Log Insight

A large print shop customer is looking for a new SAN for their VMware cluster that is also able to directly provide file shares for their Apple Mac OS X desktops.Which tool should you use to determine which SANs will natively support the customer's need?

HPE Single Point of Connectivity Knowledge

Refer to the exhibit. You are using NinjaStars to size a Nimble storage array to fulfill a customers requirements and you see the output shown in the exhibit. What should you change to make this a supported configuration?

Remove the 2-port 10 G baseT since the customer requires FC connectivity only

Increase the SSD size to get a higher Flash-to-Disk ratio.

increase the size of selected disks to fulfill the requirement of 40 TB of capacity.

Increase the number of disks to fulfill the requirement of 40 TB of capacity.

Remove the 2-port 10 G baseT since the customer requires FC connectivity only

A customer has an existing HPE MSA 2050 SAS. They need to add a DL380 GenlO server running VMware ESXI 6.7 The customer would also like to boot from shared storage with this new DL380 Gen10 server Which tool should you use to determine an appropriate DL380 Gen10 server HBA and its required firmware version to support boot from shared storage for this configuration'?

HPE Single Point of Connectivity Knowledge

HP HPE0-S57 Practice Test 3 - Free Online Exam Prep & Questions

A customer is asking for the latest version of the HPE Nimble Storage Integration Guide.

Where can the customer download the guide?

Become a Premium Member for full access

Unlock Premium Member

HP HPE0-S57 Practice Test 3

Question

HP HPE0-S57 Practice Tests

Practice Tests