Home / HP / HPE0-V15

HP HPE0-V15 Practice Test - Questions Answers, Page 5

Question list

List of questions

Question 41

(0)

A customer has a single ProLiant DL560 Gen 10 running a virtualization system. They want to validate installed firmware components at the hardware level. Which built-in management tool should they

Question 42

(0)

HOTSPOT You are configuring an MSA 2052 for one of your customers in OCA. Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and

Question 43

(0)

Which web service uses baste CRUD operations performed on resources using HTTP Post, Get. Put. Delete, and Patch?

Question 44

(0)

An administrator deployed a new FlexFabric switch Into the environment and wants to collect baseline information from the switch The administrator wants to be able to use this in case there is any q

Question 45

(0)

Refer to the exhibit. You are configuring a pair of HPE 5945 switches into an IRF stack You have cabled the switches as depicted in the exhibit Into which IRF Ports should you place each switch i

Question 46

(0)

DRAG DROP Match each ProLiant solution to its ideal use case

Question 47

(0)

You configured a port on an HPE FiexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs interface Ten-GigabitEthernet 1/0/11 description server ESXiOl-ethl

Question 48

(0)

A customer is moving a server from a co-location facility back into their existing data center to comply with new internal policies on data management Due to budget constraints, the customer cannot

Question 49

(0)

Refer to the exhibits. A customer is growing rapidly, and they need to add as many drives as possible to their MSA 2052 array. You created the original configuration. How many drives can be added

Question 50

(0)

A customer needs to consolidate software, hardware, and backup in a single integrated solution to reduce the cost and complexity of their IT environment Which solution meets the customer needs?

Related questions

What does the term composable mean when applied to HPE infrastructure?

A customer needs to add storage capacity to a host In a remote branch office. They have limited IT resources, so the solution requires ease of integration at a low price point Which HPE Storage family best meets these needs?

Which network protocol is used to build a loop-free logical topology for Ethernet networks?

You are discussing storage types with a customer that is configuring their NAS solution. The company's application developers use user-generated media and image files. For which type of data should this customer use file storage?

An administrator has two switches connected with a single link. The administrator observes that, during hours of peak activity, the storage traffic tends to consume the link. The link is shared with other types of traffic that is time sensitive. What technology can the administrator use to help alleviate the situation while they are working towards a long-term solution?

A customer requires an entry-level, all-flash system with predictable performance at the lowest possible price. They have performance-sensitive workloads that require speed and efficiency. Which HPE storage system needs the customer's requirements?

A customer has a single HPE ProLiant Gen 10 server. Which embedded management tool should they use to monitor the server?

A customer needs a solution for a rack of servers. They need connectivity for 14 HPE DL380 servers, which each have two 10-GBASE-T Ethernet ports, and 10 HPE DL360 servers, which have two 10GBASE-X SFP+ Ethernet ports. They need switch redundancy for each server and want to connect all servers to the same switch stack. The client also needs a 400 Gb backbone connection to the data center core switch from the solution you are creating. Which architecture meets the customer requirements?

You are reviewing a series of MSA2052 storage designs for a customer's remote locations. Their largest remote site requires the highest possible level of internal data protection with at least 20 TB of storage. Which disk drive design is adequate for this site?

Read the question, and then refer to the exhibit. <Switch-A>display int Ten-GigabitEthernet 1/0/1 Ten-GigabitEthernet1/0/1 Current state: UP Line protocol state: UP IP packet frame type: Ethernet II, hardware address: d894-03fb-793d Description: Ten-GigabitEthernet1/0/1 Interface Bandwidth: 10000000 kbps Loopback is not set Media type is stack wire, port hardware type is STACK SFP_PLUS 10Gbps-speed mode, full-duplex mode Link speed type is autonegotiation, link duplex type is autonegotiation Flow-control is not enabled Maximum frame length: 10000 Allow jumbo frames to pass Broadcast max-ratio: 100% Multicast max-ratio: 100% Unicast max-ratio: 100% PVID: 1 MDI type: Automdix Port link-type: Trunk VLAN Passing: 10 VLAN permitted: 10 Trunk port encapsulation: IEEE 802.1q Port priority: 0 <SNIP> An administrator connected a hypervisor to interface Ten-Gigabit Ethernet1/0/1 in a switch. The administrator created virtual machines in VLAN 10 and 20 on the hypervisor. These VLANs are configured to be tagged on the hypervisor. The administrator found that all the virtual machines within VLAN 20 can communicate with each other, but not to any resource on VLAN 20 outside the hypervisor. What must you do to resolve this issue?

Question 41

A customer has a single ProLiant DL560 Gen 10 running a virtualization system. They want to validate installed firmware components at the hardware level.

Which built-in management tool should they use to complete this task?

HPE OneView Advanced

ILO 5 Advanced

UEFI

HPE intelligent Provisioning

Show Answer Comment (0)

Question 42

HOTSPOT

You are configuring an MSA 2052 for one of your customers in OCA.

Click on either one of the two places on the Bill of Materials screen that will enable you to verify the configuration and get details on any errors.

Show Answer Comment (0)

Question 43

Which web service uses baste CRUD operations performed on resources using HTTP Post, Get. Put.

Delete, and Patch?

cURL

REST

CORBA

SOAP

Show Answer Comment (0)

An administrator deployed a new FlexFabric switch Into the environment and wants to collect baseline information from the switch The administrator wants to be able to use this in case there is any question from support should the administrator open a case.

Which command can the administrator use to collect support information from the switch?

support save

show switch Info

display diagnostic-information

show tech all

Show Answer Comment (0)

Question 45

Refer to the exhibit.

You are configuring a pair of HPE 5945 switches into an IRF stack You have cabled the switches as depicted in the exhibit Into which IRF Ports should you place each switch interface?

Option A

Option B

Option C

Option D

Show Answer Comment (0)

Question 46

DRAG DROP

Match each ProLiant solution to its ideal use case

Show Answer Comment (0)

Question 47

You configured a port on an HPE FiexFabric 5900 series switch that is connected to a VMware ESXi server to support multiple VLANs interface Ten-GigabitEthernet 1/0/11 description server ESXiOl-ethl port link-type trunk port trunk permit vlan 50 port trunk permit vlan 2 port trunk pvid vlan 50 Given the configuration above, what should happen to any untagged traffic coming from the VMware ESXI host?

It will be transmitted in vlan 1.

It will be dropped

It will be transmitted in vlan 2

It will be transmitted in vlan 50.

Show Answer Comment (0)

Question 48

A customer is moving a server from a co-location facility back into their existing data center to comply with new internal policies on data management Due to budget constraints, the customer cannot purchase any additional switches and will need to use an existing end-of-row design with HPE FlexFabric switches While the server will be installed six racks away from the switches, the total cable run with cable management Is expected to be 35 m.

Which component should be selected when designing the 10 Gbps connectivity option for the server?

QSFP28 Active Optical Cable

SFP+ 10G LC SR Transceiver

SFP+ Active Optical Cable

SFP+ Direct Attach Copper Cable

QSFP+ Active Optical Cable

Show Answer Comment (0)

Question 49

Refer to the exhibits.

A customer is growing rapidly, and they need to add as many drives as possible to their MSA 2052 array. You created the original configuration. How many drives can be added to the customer array?

(Select two)

48 SFF drives

24 LFF drives

12 SFF drives

12 LFF drives

24 SFF drives

Show Answer Comment (0)

Question 50

A customer needs to consolidate software, hardware, and backup in a single integrated solution to reduce the cost and complexity of their IT environment Which solution meets the customer needs?

HPE StoreEasy

HPE StoreOnce

HPE Apollo Server

HPE SimpliVity

Show Answer Comment (0)

Total 80 questions

3 4 5 6 7

Go to page: of 8