Home / HP / HPE6-A69

HP HPE6-A69 Practice Test - Questions Answers, Page 3

Question list

List of questions

Question 21

(0)

Refer to the following configuration: How do you configure QoS policies for user traffic in conjunction with user roles in all wired access switches? (Select two)

Question 22

(0)

A customer would like to utilize some ArubaOS-CX 6300F switches to perform OSPF routing. With the ports set up as routed ports, and default parameters for OSPF. what is me OSPF cost for me connec

Question 23

(0)

An administrator warns to start a REST API session with an Aruba-OS CX switch Which HTTP methodshould the Administrator use to start a session?

Question 24

(0)

The customer has a requirement for creating security filtering for IPv4 and IPv6 traffic passing through an ArubaOS-CX 6400 switch. Which statement Is true about access-list on the selected switch m

Question 25

(0)

A customer would like to utilize some ArubaOS-CX 8325 switches to discard unwanted traffic to the IP address 10 20.30 40. You enter the following command on the switch: Ip route 10.20.30.40/32 bla

Question 26

(0)

After a Proof of Concept where NetEdit was used to troubleshoot the network, the customer agrees that NetEdit meets some of its technical goals. Which technical goals does NetEdit meet? (Select two

Question 27

(0)

When planning a new wired network solution for an organization, mere are technical goals that must be achieved to support the organization objectives and their applications and services. Which opti

Question 28

(0)

A customer would like to utilize some ArubaOS-CX 6300F switches to perform OSPF routing. With the ports set up as routed ports, and default parameters for OSPF, which action is the simplest way t

Question 29

(0)

Before designing a new network solution for a customer with between 2398 and 5264 employees, you should gamer Information from the customer about their wired network needs. What are valid questions

Question 30

(0)

A customer with an ArubaOS-CX 6300M switch is having a performance issue on the network and has received complaints about users experiencing intermittent connectivity. After performing troubleshooti

Related questions

A customer wants to implement a new Aruba 6300M 48-port iGbE Class 4 PoE and d-port SFP56 Switch solution. The customer wants to automatically provision devices, connected to the switch with correct settings. VoIP phones need to be placed in VLAN 10, send out traffic with a VLAN tag. The phone is LLDP-MED capable How can you accomplish this with the least amount of administrative effort? A) B) C) D)

With the given topology, the customer Has ArubaOS-CX 6300 switches and Aruba Gateway in use. What is required for the client traffic to be tunneled as per best practice between the connected switch port and the Aruba Gateway'' (Select two.)

Which statements are true with regards to Strict Priority scheduling? (Select two.)

(Scenarios may contain multiple errors which may or may not impact the solution) Refer to the Exhibit. An engineer has attempted to configure two pairs of switches m the referenced configuration it Is required to implement Multi-Chassis Link Aggregation for each pair of switches The ports of the Aruba 8325 switches used for Agg01 and Agg02 are populated as follows The configuration includes: There is an error message stating "mismatched group speed" What should you add to the configuration to correct the error?

The customer is considering Implemented the following VSX configuration that will host an Aruba mobility cluster servicing 9000 dual stack employee devices. The client's default gateways will be hosted on the VSX stack. The customer is seeking advice about how to ensure ArubaOS-CX VSX best practices have been applied. What advice can you offer the customer? (Select two)

Refer to the exhibit. Aruba CX 6300 switch has routes in three different VRFs as per the example above. The user needs to leak routes between VRF Secure and VRF Dev. and also between VRF default and VRF Dev The customer Is not able to establish routing between directly connected networks 10.100.50.0/24 and 10.102.26.0/24 Which statement is true regarding the routing troubleshooting?

A customer with an ArubaOS-CX 6300M switch is having a performance issue on the network and has received complaints about users experiencing intermittent connectivity. After performing troubleshooting it is determined that many of the local websites on the LAN that users are unable to reach are resolved to an invalid MAC address What are the minimum steps that should be performed to mitigate this condition? (Select two.)

Refer to the exhibit. • For all traffic within VLAN 10. a remark action or DSCP value EF must be set • For all traffic exiting VLAN 10, a remark action of DSCP value AF41 must be set Which is the correct configuration? A) B) C) D)

The customer is implementing new ArubaOS-CX 6300 switches into an environment that has thirdparty switches and uses centralized authentication from Microsoft Active Directory and TACACS* servers What would be a valid configuration requirement for ArubaOS-CX switches for centralized user authentication?

Question 21

Refer to the following configuration:

How do you configure QoS policies for user traffic in conjunction with user roles in all wired access switches? (Select two)

Use NetEdit to replicate the configuration of QoS policies to all wired switches

in a RADIUS server with Aruba Vendor Specific Attribute (VSA) dictionary, you can add QoS policies for user roles.

With ClearPass and downloadable user roles, you can add QoS policies for user roles

QoS policies should be configured by the Mobility Controller when you need to set to all wired access switches

Show Answer Comment (0)

Question 22

A customer would like to utilize some ArubaOS-CX 6300F switches to perform OSPF routing.

With the ports set up as routed ports, and default parameters for OSPF. what is me OSPF cost for me connection between SW-3 and SW-4"?

100

1000

10000

Show Answer Comment (0)

Question 23

An administrator warns to start a REST API session with an Aruba-OS CX switch Which HTTP methodshould the Administrator use to start a session?

PUT

GET

POST

Show Answer Comment (0)

The customer has a requirement for creating security filtering for IPv4 and IPv6 traffic passing through an ArubaOS-CX 6400 switch. Which statement Is true about access-list on the selected switch model?

IPv4 and IPv6 entries can be used in one ACL with separate rules

Separate IPv4 and IPv6 ACLs need to be created for inbound and outbound traffic

Only one inbound or outbound ACL can be bound to an interface.

Routed interfaces can have only inbound ACLs

Show Answer Comment (0)

Question 25

A customer would like to utilize some ArubaOS-CX 8325 switches to discard unwanted traffic to the IP address 10 20.30 40.

You enter the following command on the switch:

Ip route 10.20.30.40/32 blac

What will be the result?

The switch will not discard packets to the destined host

The switch will discard packets to the destined host and create a tog message

The switch will discard packets to the destined host silently

The switch will discard packets to the destined host and return ICMP error to the sender.

Show Answer Comment (0)

Question 26

After a Proof of Concept where NetEdit was used to troubleshoot the network, the customer agrees that NetEdit meets some of its technical goals.

Which technical goals does NetEdit meet? (Select two.)

improve reliability of mission-critical applications

improve the network's scalability

improve the network throughput

Minimize network downtime

Simplify network management

Show Answer Comment (0)

Question 27

When planning a new wired network solution for an organization, mere are technical goals that must be achieved to support the organization objectives and their applications and services.

Which options are valid technical goals? (Select two.)

Reduce the cost of wiring.

Transform the process of acquisition of a new network solution from a CAPEX to an OPEX model

improve the network throughput

Replace hardware that is reaching end of support with a technology refresh.

Accelerate the ordering process of new network hardware.

Show Answer Comment (0)

Question 28

A customer would like to utilize some ArubaOS-CX 6300F switches to perform OSPF routing.

With the ports set up as routed ports, and default parameters for OSPF, which action is the simplest way to allow the fastest communication…

Utilize Equal-cost multi-path routing to aggregate more bandwidth on the WAN.

Set the OSPF cost parameters on every interface on every switch according to the Bandwidth or each link

No action is required

Set the OSPF reference bandwidth to 10 or higher

Show Answer Comment (0)

Question 29

Before designing a new network solution for a customer with between 2398 and 5264 employees, you should gamer Information from the customer about their wired network needs.

What are valid questions to determine their wired network needs? (Select two.)

How experienced is your networking team?

What is the current cabling deployed in the location?

What are the current device capabilities and topology?

Do you plan to add new customer services?

How much do you plan to spend in the new wired network?

Show Answer Comment (0)