Click the Exhibit button. Referring to the exhibit, what would a guest user be able to do?

Use the Internet, except for Gmail and Slack.

Use the HP Printer and Internet.

Which two statements are correct about channel bonding? (Choose two.)

Bonding two channels together doubles the available bandwidth.

Bonding two channels together doubles the required device resources.

Bonding two channels together doubles the number of available channels.

Bonding two channels together doubles the available bandwidth.

Bonding two channels together doubles the required device resources.

Bonding two channels together doubles the noise floor.

Bonding two channels together doubles the number of available channels.

You have received a Marvis Actions Missing VLAN notification.In this scenario, where is the problem?

The gateway is missing the VLAN.

An access point is missing the VLAN.

Site A is configured with a WLAN and a policy. The administrator creates a configuration template at the organization level with additional policies for the same WLAN and mentions Site A in this template.In this scenario, which statement is correct?

The policy that is created at the site level will execute first.

The policy that is created in the config template at the organization level will execute first.

The policy created at the organization level can be applied to a site group, not to an individual site.

The policy that is created at the site level will execute first.

There is no option to mention the site in the config template at the organization level.

What are two ways to access Marvis? (Choose two.)

Use the conversational assistant.

Which two statements correctly describe an extended service set (ESS)? (Choose two.)

Each BSS within the ESS has its own unique BSSID.

The SSID is common across all BSSs within the ESS.

Each BSS within the ESS share a common BSSID.

Each BSS within the ESS has its own unique BSSID.

The SSID is common across all BSSs within the ESS.

The SSID is unique across all BSSs within the ESS.

You are installing and booting up your first Juniper Mist AP at your site.By default, which two statements are correct in this scenario? (Choose two.)

The AP will attempt to connect to the Mist cloud using port 443.

The AP will send DHCP requests using the native VLAN.

The AP will attempt to connect to the Mist cloud using port 443.

The AP will send DHCP requests using the native VLAN.

The AP will send DHCP requests with a VLAN ID of 10.

The AP will attempt to connect to the Mist cloud using port 8080.

Which two statements are true about 802.1X/EAP? (Choose two.)

Credentials are exchanged with a RADIUS server prior to the 4-way Handshake.

Credentials are exchanged with a RADIUS server after the 802.11 Association.

Credentials are exchanged with a RADIUS server prior to the 4-way Handshake.

Credentials are exchanged with a RADIUS server after the 802.11 Association.

Credentials are exchanged with a RADIUS server after the 4-way Handshake.

Credentials are exchanged with a RADIUS server prior to the 802.11 Association.

Click the Exhibit button. Referring to the exhibit, what is the meaning of the AI VALIDATED status update?

The issue was opened and Marvis confirms it has been closed.

The issue was opened and is unresolved.

The issue was opened and Marvis confirms it has been closed.

The issue was opened and Marvis has closed it.

The issue was opened and closed manually.

Which access points (APs) will be considered for inclusion in the AP Offline Marvis Action?

all APs assigned to sites that have connected to the cloud previously

Regarding the seven layer OSI networking model, which two layers are different between Ethernet and Wi-Fi? (Choose two.)

media access control (MAC) sub-layer

logical link control (LLC) sub-layer

A customer is replacing their previous WLAN controller with a Mist Edge to maintain centralization of user traffic.How does Mist Edge affect control plane forwarding and data plane forwarding in this scenario?

Control plane forwarding applies to the Mist Cloud and data plane forwarding applies to the Mist Edge.

Control plane forwarding applies to the Mist Edge and data plane forwarding applies to the Mist Edge.

Control plane forwarding applies to the Mist Cloud and data plane forwarding applies to the Mist Cloud.

Control plane forwarding applies to the Mist Edge and data plane forwarding applies to the Mist Cloud.

Click the Exhibit button. Users are occasionally having problems connecting to the Internet using Wi-Fi. You suspect possible interference from a neighboring Wi-Fi network.Referring to the exhibit, which Wi-Fi Assurance SLE and classifier would provide information about this issue?

Capacity and Wi-Fi Interference

Capacity and Non Wi-Fi Interference

Capacity and Wi-Fi Interference

When does a Mist AP actually begin transmitting BLE?

When BLE is enabled for the AP.

When it is claimed and placed on a site.

When it is placed on a floor plan.

When BLE is enabled at the Organization level.

When BLE is enabled for the AP.

Click the Exhibit button. Referring to the exhibit, which two statements are correct? (Choose two.)

The WLAN with SSID NETGEAR24 will cause adjacent channel interference.

The WLAN with SSID Bob24WiFi will cause adjacent channel interference.

The WLAN with SSID NETGEAR24 will cause adjacent channel interference.

The WLAN with SSID Bob24WiFi will cause adjacent channel interference.

The WLAN with SSID Verizon-5G_Tuna will cause adjacent channel interference.

The WLAN with SSID Eero1234 will cause adjacent channel interference.

You receive a Marvis Actions alert informing you that there is a non-compliant AP at one of your sites.What should you do to correct the problem?

Install the correct version of firmware on the AP.

Disconnect the Rogue AP from your Ethernet switch.

Replace the AP with the correct hardware model.

Install the correct version of firmware on the AP.

All the access points (APs) on the site will obtain an IP address for the Management VLAN. You notice an additional IP address for each configured VLAN on the AP.Which statement is correct in this scenario?

The Local Status Page has been enabled in the AP setting under the Site configuration.

The AP is configured to support wireless mesh.

This behavior is enabled by default under the Site configuration.

The Local Status Page has been enabled in the AP setting under the Site configuration.

The AP MAC has a DHCP reservation.

Click the Exhibit button. Referring to the exhibit, which two statements are correct? (Choose two.)

The organization has two available licenses for Marvis wireless.

The organization is using one license for Marvis wireless.

The organization has one available license for Marvis wireless.

The organization has two available licenses for Marvis wireless.

The organization is using one license for Marvis wireless.

The organization is using two licenses for Marvis wireless.

Click the Exhibit button. Referring to the exhibit, which statement is correct about the Post-Install user's role?

It has access limited to installing APs and switches at all sites.

It is used for help desk monitoring and workflow for all sites.

It has access limited to installing APs and switches at all sites.

It has read-only access to all sites.

It has full access to all sites.

Click the Exhibit button. A user opened a ticket. Upon troubleshooting, you determine that frequent roaming is the root cause of the problem.Referring to the exhibit, which statement describes the roaming issue that the client is experiencing?

There are frequent roams between different access points.

There are frequent roams between different protocols.

There are frequent roams between different bands.

There are frequent roams between different WLANs.

There are frequent roams between different access points.

A user with a PSK calls you and says, "The Wi-Fi worked for a week and now it does not work." There have not been any recent configuration changes to the network. You suspect that a time-based setting has reset the key.In this scenario, where would you begin troubleshooting?

Organization-level Pre-Shared Keys

Asset tracking using Mist-supported third-party BLE beacons has been installed in a warehouse. The BLE beacons were configured using their manufacturer-supplied configuration utility and BLE was properly configured for the site settings.When the warehouse floor plan is opened in Live View, the third-party beacons are not shown.Which two statements describe causes for this issue? (Choose two.)

The Show assets check box has not been selected in Live View.

The Locate this Client as an Asset check box has not been selected at the BLE client level.

The Show assets check box has not been selected in Live View.

Marvis was not enabled for the site.

The Locate this Client as an Asset check box has not been selected at the BLE client level.

The APs are installed at 19 feet from the floor, above the recommended 15 feet.

Which two statements are correct about Juniper Mist Dynamic Packet Capture? (Choose two.)

No configuration is necessary for Mist's Dynamic Packet Capture.

It is automatically attached to a client event displayed on the Insights page.

No configuration is necessary for Mist's Dynamic Packet Capture.

It is automatically attached to a client event displayed on the Insights page.

It must be globally configured at the organization level.

It is automatically attached to the Affected Items list in the Successful Connects SLE.

Juniper JN0-451 Practice Test 1 - Free Online Exam Questions 1-40

Question 1 / 40

Which two statements are correct about the radio frequency rule of 10s and 3s? (Choose two.)

If the signal strength increases by 3 dB, the power is doubled.

If the signal strength decreases by 10 dB, the power decreases tenfold.

If the signal strength increases by 3 dB, the power is tripled.

If the signal strength decreases by 10 dB, the power is halved.

Comment (0)

Juniper JN0-451 Practice Test 1

Question

Juniper JN0-451 Practice Tests

Practice Tests