A company produces rubber hose using Discreet orders accounts for raw material scrap after report as finished through inventory movement journals.The company has noticed that most of the scrap that is recorded is due to start up that feeds the hose to the finishing process. In addition, the amount of scrap that is recorded is consistent regardless of the amount of hose being produced.You need to account for material cost during startup.What should you do?

Enter the amount of scrap that is consumed as constant scrap in the Bill of materials.

Do a case study for the scrap items and enter the average amount of scrap as a separate line items on the Bill of materials.

Enter the amount of scrap that is consumed as constant scrap in the Bill of materials.

Enter the amount of scrap that is consumed as variable scrap in the Bill of materials.

Enter the consumption amount on the line to match the actual amount used.

A Discrete manufacturing company produces speakers. The high-end speaker model uses protective rubber strips on the edges.Approximately five inches of rubber is consistently scrapped in the production process, regardless of production quantity. Workers manually consume the extra material on the picking list or scrap it in an inventory journal.You need configure the system to automatically account for this scrap on the Bill of materials (BOM).What should you do?

Set a Constant scrap of five on the BOM line for rubber

Increase the required quantity of the rubber component by five on the BOM

Set a variable scrap of five percent for the rubber BOM line

Add an additional BOM line for five inches and set consumption to Variable

Set a Constant scrap of five on the BOM line for rubber

A company implements Dynamics 365 Supply Chain Management.Due to increased demand and limited space in the work cell area for product L0050, you must subcontract overflow work to another company. You have the following requirements:Locate a warehouse at the subcontractor building.Support picking and shipping activity tracking.Associate costs of transporting materials between the locations in the cost of the finished product.You need to modify the production flow.Which three actions should you perform? Each correct answer presents part of the solution.NOTE: Each correct selection is worth one point.

Modify the overflow work activity and assign it to subcontractor

Create transfer activities and assign them to the subcontractor

Create a resource and work cell resource group for the subcontractor

Modify the overflow work activity and assign it to subcontractor

Create transfer activities and assign them to the subcontractor

Create a resource and work cell resource group for the subcontractor

Create a new production flow version

Modify the overflow work operation and associate it with the subcontractor

You are a production manager at a company that has implemented lean manufacturing using Dynamics 365 Supply Chain Management.You have created a new Kanban rule to replace one that is expiring.You need to determine the impact to the existing process jobs.How are the active Kanbans of the expired rule handled?

The active Kanbans are set to add to the requested period and distribute for the replacement rule time fence.

The active Kanban handling units are registered as empty and new Kanbans are created.

The active Kanbans are cancelled.

The active Kanbans are counted as Kanbans of the replaced rule.

A manufacturing plant uses Lean manufacturing. Operators process Kanban consumption manually by using a mobile device.The production team must use automatic empty registration for some of the event Kanbans. Registration must occur when the last job of a Kanban is completed.You need to update the Kanban rule to meet this requirement.What Kanban setting should you update?

Select to register as empty when handling units are received

Select to register as empty when the source requirement is registered

Select to register as empty when handling units are received

Select to manually register as empty

You are the production planner for a manufacturing company.After running operations scheduling for a production order, the following error message displays: You need to identify the cause of the error.Which two actions should you perform? Each correct answer presents part of the solution.NOTE: Each correct selection is worth one point.

Review the calendar for the resource to determine if it is expired.

Review the available resources for Operation 10. Navigate to the Resource form and validate whether there is a calendar assigned.

Navigate to the work calendar and view working times. Validate that there are working days created in the scheduled period.

Review the calendar for the resource to determine if it is expired.

Review the available resources for Operation 10. Navigate to the Resource form and validate whether there is a calendar assigned.

Review the resource group assigned to Operation 10. Check to see if there is a calendar assigned and if the calendar is expired.

You have a product that can be manufactured on two different production lines in the same warehouse. You create resources and then create individual input locations for the resources. You create two routes. Each route uses different resources.Materials are staged for consumption in different locations based on the resources being utilized for production.You need to set up the formula to consume the goods from the correct line-side location.What should you do?

Select resource consumption and the operation for each line.

Select a warehouse and consumption operation for each line.

Select resource consumption and the operation for each line.

Select the plan group and consumption operation for each line.

Specify a site in the formula header.

You are responsible for training the operations staff on production transactions in Dynamics 365 Supply Chain Management. The company uses backflushing for material consumption principles.You need to train the operators on how to report unintended scrap.What are two possible ways to achieve this goal? Each correct answer presents a complete solution.NOTE: Each correct selection is worth one point.

Post additional materials in a picking list journal

Report an error quantity at Report as finished

Report additional time in route card journal

Post additional materials in a picking list journal

Report an error quantity at Report as finished

Report an additional good quantity at Report as finished

You are a process engineer evaluating Lean vs. Discrete processing. You want to convert a Kanban item.The item has the following Lean setup:The setup uses a Lean schedule group with a throughput ratio=2The process activity tied to production flow has the following runtime activity times: time=3 min, per quantity=1The work cell capacity has a model type of Throughput and an average throughput quantity of 60 per a capacity period of standard workday (8-hour day)The throughput is 10 per hourYou need to set up a Discrete operation to mirror the item's production flow activity.What should you do?

Create a route with a runtime =1, a process quantity =10, and the operation's hours/time =1

Create a route with a runtime =1, a process quantity =6, and the operation's hours/time =1

Create a route with a runtime =1, a process quantity =10, and the operation's hours/time =1

Create a route with a runtime =6, a process quantity =1, and the operation's hours/time =1

Create a route with a runtime =10, a process quantity =6, and the operation's hours/time =1

You work for a gem wholesaler that sells raw diamonds. Diamonds are purchased and sold in individual boxes but weighed and inventoried in carats.You are setting up a catch weight item for diamonds. Each box of diamonds must be tracked by its individual container weight.You need to set up this item as a full visibility catch weight item.Which two steps must you perform? Each correct answer presents part of the solution.NOTE: Each correct selection is worth one point.

Assign the item a Tracking dimension group with active serial number control.

Create an inter-class unit of measure conversion between boxes and carats.

Assign it a Serial number group with per qty. defined as 1.

Assign the item a Tracking dimension group with active serial number control.

Create an inter-class unit of measure conversion between boxes and carats.

Assign a Tracking dimension group with batch number as the only active tracking dimension.

You produce 100 total units of finished goods. The amount of material used to produce the goods is the equivalent amount of material needed to produce 105 finished goods.The company must track variances in material compared to the original estimated amount. You must only use one picking list journal for each production order.You need to post a picking list that accounts for the material required to produce 105 finished goods.What should you do?

When creating the lines for a picking list, select the estimated consumption option and override the consumption field with the actual amount to be consumed.

Post a picking list for 100 to account for the originally estimated amount. Post an additional picking list to account for the equivalent amount of material to produce 5 finished goods.

Report as finished five additional units into the good quantity and post a picking list for only the originally estimated amount.

In the Bill of materials production details, edit the estimated amount for each line to equal 105 units of raw material.

When creating the lines for a picking list, select the estimated consumption option and override the consumption field with the actual amount to be consumed.

A customer produces light projection toys for holiday decorations throughout the year.You are in the first month of a season. Production flows take one day to complete.The floor supervisor reports that seasonal production targets will not be met. You review the Kanban schedule board and identify thousands of unplanned jobs.You need to plan the jobs to be completed two weeks prior to the start of the next season.What are two possible ways to achieve this goal? Each correct answer presents a complete solution.NOTE: Each correct selection is worth one point.

Set the Automatic planning option for each unscheduled job to Yes

Manually schedule each unscheduled job to the previous period of the end of the next season

Set the Automatic planning option for each unscheduled job to Yes

Manually schedule each unscheduled job on its due date

Set the Automatic planning option for each unscheduled job to No

Manually schedule each unscheduled job forward from the date of the end of the season

Manually schedule each unscheduled job to the next period of the start of the next season

Manually schedule each unscheduled job to the previous period of the end of the next season

A customer produces light projection toys for holiday decorations throughout the year. Vendors have negotiated rebate agreements as a condition of their contract. The contract also contains the visual templates required for the customer to use in a season.Vendor rebate agreements must only be applied if the following requirements are met:Units of measure for deliverables are the same unit of measure as on the agreement. The agreement is valid as of the date a purchase order is generated.You need to configure the vendor rebate agreements.What should you do?

Set the Calculation date type field value to Created

Set the Cumulative purchase by field value to the end of the season date

Set the Rebate line break type field value to Quantity

Set the Cumulative purchase by field value to the beginning of the season date

A company uses Dynamics 365 Supply Chain Management for Process manufacturing.You are reviewing the planned production orders for the next two weeks. There are several production orders for the same product. One order is scheduled to run the week after another order.You need to optimize the planned production orders.What should you do?

Rerun master planning. Select the static plan with a coverage time fence of two weeks.

In Planned orders, combine the production orders

Rerun master planning. Select the dynamic plan with a coverage time fence of two weeks

Microsoft MB-320 Practice Test 1 - Free Online Exam Prep & Questions

Question 1 / 40

A company is implementing Dynamics 365 Supply Chain Management in their manufacturing environment. The manufacturing process uses formulas to direct material consumption on the batch orders.

During production some items in the formula must be consumed automatically from the production area, while some must be picked with their actual consumption reported on a pick list.

You need to determine which setup method is used for formula lines to allow for the desired mixed method picking processes.

What are two possible ways to achieve this goal? Each correct answer presents a complete solution.

NOTE: Each correct selection is worth one point.

Leave the flushing principle blank on formula lines and set resource consumption to direct flushing principle of materials based on consumption method for the line.

Leave the flushing principle blank on formula lines and set the default start value to Always for Automatic Bill of Material Consumption.

Leave the flushing principle blank on formula lines and set default flushing principle on the items based on consumption method for the item.

Set the flushing principle on each formula line based on consumption method for the line.

Comment (0)

Microsoft MB-320 Practice Test 1

Question

Microsoft MB-320 Practice Tests

Practice Tests