Quiz IT certification exam

Question 1

You need to recommend an Office 365 solution that meets the technical requirements for email from adatum.com. Which two components should you recommend configuring from the Exchange admin center in Exchange Online? Each correct answer presents a complete solution. NOTE: Each correct selection is worth one point.

Accepted Answer

a connection filter

Accepted Answer

a spam filter

Answer

a malware filter

Answer

data loss prevention (DLP) policies

Answer

DKIM signatures

Question 2

You must preview HelpDeskUser1 from repeating the same mistake.You need to identify which management role provided HelpDeskUser1 with the necessary permissions to make the mistake identified in the problem statement. Which two cmdlets should you run? Each correct answer presents part of the solution.NOTE: Each correct selection is worth one point.

Accepted Answer

Get-ManagementRoleEntry

Accepted Answer

Get-MangementRoleAssignment

Answer

Get-RoleGroupMember

Answer

Get-ManagementRole

Answer

Get-RoleGroup

Question 3

You need to recommend a solution that meets the security requirements for protecting users.What should you recommend?

Accepted Answer

From the Security & Compliance admin center, create an ATP Safe Links policy.

Answer

From the Security & Compliance admin center, create an ATP safe attachments policy.

Answer

From the Security & Compliance admin center, create an ATP anti-phishing policy.

Answer

From the Exchange admin center in Exchange Online, create a spam filter policy.

Question 4

You need to configure the Exchange organization to meet the security requirements for sending email messages to distribution groups. Which cmdlet should you run?

Accepted Answer

Set-OrganizationConfig

Answer

Set-Mailbox

Answer

Set-DistributionGroup

Answer

New-PolicyTipConfig

Question 5

You must prevent HelpDeskUser1 from repeating the same mistake.You need to identify which management role provided HelpDeskUser1 with the necessary permissions to make the mistake identified in the problem statement. Which two cmdlets should you run? Each correct answer presents part of the solution.

Accepted Answer

Get-ManagementRoleAssignment

Accepted Answer

Get-ManagementRoleEntry

Answer

Get-ManagementRole

Answer

Get-RoleGroup

Answer

Get-RoleGroupMember

Question 6

HOTSPOTYou need to configure the environment to support the planned changes for email addresses.How should you complete the command? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.Hot Area:Answer:

Accepted Answer

Answer

Question 7

You need to identify the contents of the FabrikamProject public folder to meet the technical requirements.Which PowerShell cmdlet should you run?

Accepted Answer

Get-PublicFolderItemStatistics

Answer

Get-PublicFolderStatistics

Answer

Get-PublicFolderMailboxDiagnostics

Answer

Get-PublicFolder

Question 8

You need to encrypt email between Fabrikam and Litware to support the planned changes.What should you configure in the Exchange admin center?

Accepted Answer

a connector

Answer

an organization relationship

Answer

a sharing policy

Answer

a remote domain

Question 9

You need to email a list of configuration changes to the Exchange Online environment that were recently performed by Allan Deyoung.What should you do?

Accepted Answer

Export the admin audit log

Answer

Run the admin audit log report

Answer

Run the external admin audit log report

Answer

Run an administrator role group report

Answer

Export the mailbox audit logs

Question 10

HOTSPOTFor each of the following statements, select Yes if the statement is true. Otherwise, select No.NOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Question 11

You need to configure the required objects for the branch office administrators.What should you create for each administrator?

Accepted Answer

a management role scope and a management role assignment

Answer

a management role assignment policy and a management role group

Answer

a management role and a management role assignment policy

Answer

a management role scope and a management role group

Question 12

HOTSPOTYou need to implement a solution that meets the technical requirements for the retention of junk email, sent items, and deleted items.What is the minimum number of retention policies and retention tags you should use? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Question 13

You need to implement a solution to support the planned changes for the branch office administrators.What should you do?

Accepted Answer

Assign the Mail Recipients role to the branch office administrators and create a custom management scope.

Answer

Assign the Mail Recipients role to the branch office administrators and use a default management scope.

Answer

Assign the Recipient Policies role to the branch office administrators and use a default management scope.

Answer

Assign the Recipient Policies role to the branch office administrators and create a custom management scope.

Question 14

HOTSPOTYou need to implement a solution to meet the technical requirements for the SCL.How should you complete the command? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Question 15

Which contacts can sign in to and access resources in the adatum.com tenant?

Accepted Answer

Contact2 and Contact3 only

Answer

Contact1 only

Answer

Contact2 only

Answer

Contact1 and Contact3 only

Answer

Contact1, Contact2, and Contact3

Question 16

Lynne Robbins and the users in the sales department plan to collaborate on a project with a partner company named Contoso, Ltd. that has an email domain named contoso.com. You need to ensure that only the sales department users can share all their calendar free/busy information with the users in contoso.com. How should you configure the organization relationship?

Accepted Answer

Select Calendar free/busy information with time, subject, and location and enter Group3.

Answer

Select Calendar free/busy information with time only and enter Group1.

Answer

Select Calendar free/busy information with time, subject, and location and enter Group2.

Answer

Select Calendar free/busy information with time only and enter Group3.

Answer

Select Calendar free/busy information with time only and enter Group2.

Question 17

You need to ensure that Alex Wilber can recover deleted items when using Outlook on the web.Which two actions should you perform? Each correct answer presents a complete solution.NOTE: Each correct selection is worth one point.

Accepted Answer

Modify Marketing Policy.

Accepted Answer

Assign Policy2 to Alex Wilbur.

Answer

Assign Sales Policy to Alex Wilbur.

Answer

Remove Alex Wilbur from all groups.

Answer

Modify Policy1.

Question 18

You need to identify which users clicked the links in the phishing emails.What should you do?

Accepted Answer

Use the URL trace reporting feature.

Answer

Run a message trace and review the results.

Answer

Query the mailbox audit log.

Answer

Review the quarantine mailbox.

Question 19

HOTSPOTHow many default policy tags (DPTs), retention policy tags (RPTs), and personal tags should you create to meet the retention requirements? To answer, select the appropriate options in the answer area.NOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Question 20

SIMULATIONPlease wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task. Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.<img alt="Microsoft MS-203 image Question 1 104553 10052024010522000000"   width="900" height="602" src="https://examgecko.com/getfile/a4ebf75f-9bde-4c63-bf46-dbe5785e2610">Use the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below. Microsoft 365 Username: admin@abc.com Microsoft 365 Password: xxxxxxIf the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab. The following information is for technical support purposes only.Lab Instance: XXXXXXYou need to ensure that the users in your company can schedule a conference room named Room1 in the company’s office by using Microsoft Outlook. To complete this task, sign in to the Exchange admin center.

Accepted Answer

Question 21

SIMULATIONPlease wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task. Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.<img alt="Microsoft MS-203 image Question 2 104554 10052024010522000000"   width="620" height="417" src="https://examgecko.com/getfile/06d2bab9-6b34-491e-841e-f47f60f9000d">Use the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below. Microsoft 365 Username: admin@abc.com Microsoft 365 Password: xxxxxxIf the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab. The following information is for technical support purposes only.Lab Instance: XXXXXXYou need to ensure that the users in your tenant can only share calendar availability information with the other users in the tenant. To complete this task, sign in to the Microsoft 365 admin center.

Accepted Answer

Question 22

SIMULATIONPlease wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task. Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.<img alt="Microsoft MS-203 image Question 3 104555 10052024010522000000"   width="900" height="602" src="https://examgecko.com/getfile/65e37e54-4c5c-44f4-b80f-262c58dd492c">Use the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below. Microsoft 365 Username: admin@abc.com Microsoft 365 Password: xxxxxxIf the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab. The following information is for technical support purposes only.Lab Instance: XXXXXXYou need to ensure that all email sent or received by a user named Diego Siciliani is preserved in Exchange Online. The solution must prevent Diego Siciliani from permanently deleting any email messages for 180 days. To complete this task, sign in to the Microsoft 365 admin center.

Accepted Answer

Question 23

SIMULATIONPlease wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task. Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.<img alt="Microsoft MS-203 image Question 4 104556 10052024010522000000"   width="620" height="417" src="https://examgecko.com/getfile/1ada9b68-9d62-4dd7-8953-ceb127e31596">Use the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below. Microsoft 365 Username: admin@abc.com Microsoft 365 Password: xxxxxxIf the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab. The following information is for technical support purposes only.Lab Instance: XXXXXXYou need to create a public folder named Finance in your Microsoft 365 tenant. Users must be able to send emails to Finance by using an email address of finance@lab.CloudCredential(1).TenantName. To complete this task, sign in to the Exchange admin center.

Accepted Answer

Question 24

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Microsoft Exchange Online tenant that contains 1,000 users.A user named User1 receives a non-delivery report (NDR) when attempting to send an email message to an internal group named sales@contoso.com. The NDR contains the following text: “5.7.1 Delivery not authorized.” You need to ensure that User1 can send email to sales@contoso.com successfully.Solution: You modify the properties of the sales@contoso.com group.

Accepted Answer

No

Answer

Yes

Question 25

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Microsoft Exchange Online tenant that contains 1,000 users.A user named User1 receives a non-delivery report (NDR) when attempting to send an email message to an internal group named sales@contoso.com. The NDR contains the following text: “5.7.1 Delivery not authorized.” You need to ensure that User1 can send email to sales@contoso.com successfully. Solution: You modify the properties of a mail flow rule

Accepted Answer

No

Answer

Yes

Question 26

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Microsoft Exchange Online tenant that contains 1,000 users.A user named User1 receives a non-delivery report (NDR) when attempting to send an email message to an internal group named sales@contoso.com. The NDR contains the following text: “5.7.1 Delivery not authorized.” You need to ensure that User1 can send email to sales@contoso.com successfully.Solution: You modify the properties of User1.

Accepted Answer

No

Answer

Yes

Question 27

SIMULATIONPlease wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task. Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.<img alt="Microsoft MS-203 image Question 8 104560 10052024010522000000"   width="620" height="417" src="https://examgecko.com/getfile/a6044d95-56f5-4996-bf70-f24b8c680857">Use the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below. Microsoft 365 Username: admin@abc.com Microsoft 365 Password: xxxxxxIf the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab. The following information is for technical support purposes only.Lab Instance: XXXXXXYou need to create a public folder named Finance. The solution must ensure that only the members of a group named Finance Team can send email messages to the Finance folder. To complete this task, sign in to the Microsoft 365 admin center.

Accepted Answer

Question 28

SIMULATIONPlease wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task. Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.<img alt="Microsoft MS-203 image Question 9 104561 10052024010522000000"   width="620" height="417" src="https://examgecko.com/getfile/597171e2-769b-4405-86dd-ad17394728f0">Use the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below. Microsoft 365 Username: admin@abc.com Microsoft 365 Password: xxxxxxIf the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab. The following information is for technical support purposes only.Lab Instance: XXXXXXYou need to ensure that a notification email is sent to compliance@constoso.com when a user marks an email message as Not Junk in Microsoft Outlook.To complete this task, sign in to the Microsoft 365 admin center.

Accepted Answer

Question 29

SIMULATIONPlease wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task. Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.<img alt="Microsoft MS-203 image Question 10 104562 10052024010522000000"   width="620" height="417" src="https://examgecko.com/getfile/585d44a3-230d-4d37-8ef5-53c97032ccc1">Use the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below. Microsoft 365 Username: admin@abc.com Microsoft 365 Password: xxxxxxIf the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab. The following information is for technical support purposes only.Lab Instance: XXXXXXYou need to ensure that the users in your tenant can only share calendar availability information with users in the tenant and users in a domain named contoso.com. To complete this task, sign in to the Microsoft 365 admin center.

Accepted Answer

Question 30

SIMULATIONPlease wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task. Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.<img alt="Microsoft MS-203 image Question 11 104563 10052024010522000000"   width="620" height="417" src="https://examgecko.com/getfile/7aded218-802c-435d-98d4-5c25949a052b">Use the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below. Microsoft 365 Username: admin@abc.com Microsoft 365 Password: xxxxxxIf the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab. The following information is for technical support purposes only.Lab Instance: XXXXXXYou need to ensure that the email messages in mailboxes and the documents in Microsoft OneDrive folders of all the users in your organization are retained for only five years. To complete this task, sign in to the Microsoft 365 admin center.

Accepted Answer

Question 31

You have a Microsoft Exchange Online tenant that contains a user named User1.You need to grant User1 the Send on Behalf permission for 20 mailboxes.Which PowerShell cmdlet should you use?

Accepted Answer

Set-Mailbox

Answer

Add-MailboxPermission

Answer

Add-MailboxFolderPermission

Answer

Add-RecipientPermission

Question 32

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Microsoft Exchange Server 2019 organization that contains 200 mailboxes.You need to add a second email address to each mailbox. The address must have a syntax that uses the first letter of each user’s last name, followed by the user’s first name, and then @fabrikam.com. Solution: You create an email address policy that uses the %1g%s@fabrikam.com email address format.Does this meet the goal?

Accepted Answer

No

Answer

Yes

Question 33

You have a Microsoft Exchange Online tenant that uses a third-party email hygiene system named Service1. Service1 blocks all encrypted email. All external email is routed through Service1 by using a connector.Users classify email by using sensitivity labels. Emails classified as Secret are encrypted automatically. You need to ensure that the users can send emails classified as Secret to external recipients.Which two items should you create? Each correct answer presents part of the solution.NOTE: Each correct selection is worth one point.

Accepted Answer

a connector

Accepted Answer

a mail flow rule

Answer

a remote domain

Answer

a data loss prevention (DLP) policy

Answer

a label policy

Question 34

Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen. You have a Microsoft Exchange Online tenant that uses an email domain named contoso.com.You need to prevent all users from performing the following tasks:Sending out-of-office replies to an email domain named fabrikam.com. Sending automatic replies to an email domain named adatum.com. The solution must ensure that all the users can send out-of-office replies and automatic replies to other email domains on the internet. Solution: You create two sharing policies.Does this meet the goal?

Accepted Answer

No

Answer

Yes

Question 35

You have a hybrid deployment between a Microsoft Exchange Online tenant and an on-premises Exchange Server 2019 organization. Users report that emails sent from Exchange Online mailboxes to the on-premises Exchange Server mailboxes are undelivered. You need to review the non-delivery report (NDR) for each undelivered email.What should you use?

Accepted Answer

message trace in the Exchange admin center

Answer

auditing in the Exchange admin center

Answer

the SMTP protocol logs in Exchange Server

Answer

the transport logs in Exchange Server

Question 36

SIMULATIONPlease wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time.When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality(e.g., copy and paste, ability to navigate to external websites) will not be possible by design.Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task.Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.<img alt="Microsoft MS-203 image Question 17 104569 10052024010522000000"   width="900" height="602" src="https://examgecko.com/getfile/627ff81c-4b21-44e0-a679-c7f0f1eabbab">Use the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below.Microsoft 365 Username: admin@abc.com Microsoft 365 Password: xxxxxxIf the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab.The following information is for technical support purposes only.Lab Instance: XXXXXXYou need to prevent users in your company from sending out-of-office replies to users who use an email address suffix of @contoso.com. The solution must NOT use mail flow rules.To complete this task, sign in to the Exchange admin center.

Accepted Answer

Question 37

SIMULATIONPlease wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task. Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.<img alt="Microsoft MS-203 image Question 18 104570 10052024010522000000"   width="620" height="417" src="https://examgecko.com/getfile/495f48bc-c3bd-4b02-a3b4-9239e00d9eab">Use the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below. Microsoft 365 Username: admin@abc.com Microsoft 365 Password: xxxxxxIf the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab. The following information is for technical support purposes only.Lab Instance: XXXXXXAnother administrator at contoso.com plans to deploy an SMTP smart host that uses an IP address of 131.107.2.200. You need to prepare a solution to route all emails sent to users in the @contoso.com domain from your organization by using the SMTP host. The solution must have a status set to Off until the administrator deploys the smart host. To complete this task, sign in to the Exchange admin center.

Accepted Answer

Question 38

SIMULATIONPlease wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task. Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.<img alt="Microsoft MS-203 image Question 19 104571 10052024010522000000"   width="900" height="602" src="https://examgecko.com/getfile/f3488513-8a89-480a-8d60-1487b30879b0">Use the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below. Microsoft 365 Username: admin@abc.com Microsoft 365 Password: xxxxxxIf the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab. The following information is for technical support purposes only.Lab Instance: XXXXXXUsers report that email disclaimers are no longer being appended to email messages sent to external recipients. You need to ensure that all email sent to external recipients contains your corporate disclaimer.To complete this task, sign in to the Microsoft 365 admin center.

Accepted Answer

Question 39

SIMULATIONPlease wait while the virtual machine loads. Once loaded, you may proceed to the lab section. This may take a few minutes, and the wait time will not be deducted from your overall test time. When the Next button is available, click it to access the lab section. In this section, you will perform a set of tasks in a live environment. While most functionality will be available to you as it would be in a live environment, some functionality (e.g., copy and paste, ability to navigate to external websites) will not be possible by design.Scoring is based on the outcome of performing the tasks stated in the lab. In other words, it doesn't matter how you accomplish the task, if you successfully perform it, you will earn credit for that task. Labs are not timed separately, and this exam may have more than one lab that you must complete. You can use as much time as you would like to complete each lab. But, you should manage your time appropriately to ensure that you are able to complete the lab(s) and all other sections of the exam in the time provided.Please note that once you submit your work by clicking the Next button within a lab, you will NOT be able to return to the lab.<img alt="Microsoft MS-203 image Question 20 104572 10052024010522000000"   width="900" height="602" src="https://examgecko.com/getfile/42861e5e-e5c2-43ec-9a85-3922d9ffe999">Use the following login credentials as needed:To enter your username, place your cursor in the Sign in box and click on the username below.To enter your password, place your cursor in the Enter password box and click on the password below. Microsoft 365 Username: admin@abc.com Microsoft 365 Password: xxxxxxIf the Microsoft 365 portal does not load successfully in the browser, press CTRL-K to reload the portal in a new browser tab. The following information is for technical support purposes only.Lab Instance: XXXXXXYou need to ensure that a user named Lee Gu can view all the Exchange Online configurations of your organization. The solution must use the principle of least privilege. To complete this task, sign in to the Microsoft 365 admin center.

Accepted Answer

Question 40

HOTSPOTYour company has the offices shown in the following table. Microsoft MS-203 image Question 21 104573 10052024010522000000

The company has a Microsoft Exchange Online tenant that contains the users shown in the following table. Microsoft MS-203 image Question 21 104573 10052024010522000000

You have the following Exchange Online client access rules. Microsoft MS-203 image Question 21 104573 10052024010522000000

You create a new client access rule by using the following command.For each of the following statements, select Yes if the statement is true. Otherwise, select No.NOTE: Each correct selection is worth one point.

Accepted Answer

Answer

Microsoft MS-203 Practice Test 6

Microsoft MS-203 Practice Tests