Click the Exhibit button. Your customer is deploying SnapCenter to protect volumes on an ONTAP Select cluster.Referring to the exhibit, which licensing is required to protect the Engineering and Marketing volumes?

a SnapProtectApps controller-based license

a SnapManagerSuite controller-based license

a 3 TB SnapCenter capacity-based license

a 5 TB SnapCenter capacity-based license

a SnapProtectApps controller-based license

A company just installed SnapCenter to help manage their ONTAP 9.7 environment. The database administrator wants to add new volumes with LUNs for a 10 TB Oracle database.Which two tools would accomplish this task? (Choose two.)

SnapCenter Plug-in for Oracle Database

You are configuring a SnapMirror replication between a source volume with adaptive compression enabled and a destination volume with secondary compression enabled.In this scenario; which statement is correct?

Storage efficiency (compressed and deduplicated blocks) is preserved during data transfer.

Blocks are uncompressed at the source and transferred to the destination.

Logical replication with storage efficiency is used.

Storage efficiency (compressed and deduplicated blocks) is preserved during data transfer.

Data is recompressed using the source volume's compression type.

A FAS2750 cluster administrator experiences network issues during replication updates that pass over a low- bandwidth WAN link to their DR site. They also replicate locally to another cluster for testing and development. The administrator wants to enable network compression only on the existing WAN Link SnapMirror jobs.In this scenario, which statement is correct?

The current DR transfers must be aborted and the option enabled on each job, then resume the transfer.

Network compression must be enabled when initializing the replica, the current jobs need to be deleted and new ones created.

Network compression is a global option and it cannot be used.

The current DR transfers must be aborted and the option enabled on each job, then resume the transfer.

Network compression is possible but not on a FAS2750.

You noticed that your SnapVault relationship is healthy but that the destination volume does not have any Snapshot copies.In this scenario, what should be performed to solve the problem?

Use the snapvault update command.

Set up volume destination free space.

Set up volume source free space.

Use the snapvault update command.

Configure a rule with the Snapshot label.

Click the Exhibit button. A customer wants to ensure that their volumes are protected. In ONTAP System Manager, under the Protection section, you see the screen that is shown in the exhibit. The company has an asynchronous mirror policy of less than a 60-minute lag.Referring to the exhibit, which volume has a lag that exceeds the company policy?

svm_fabricpool:demo_volume -> svm_fabricpool:demo_volume_DR

svm_fabricpool:demo_volume -> svm_fabricpool:demo_volume_dest

svm_fabricpool:project_a -> svm_fabricpool:project_a_dest

svm_fabricpool:demo_volume -> svm_fabricpool:demo_volume_DR

svm_fabricpool:project_b -> svm_fabricpool:project_b_dest

You are using Veeam Backup & Replication to create Snapshot-based backups of your VMware environment running ONTAP. You added your primary and secondary ONTAP cluster to the Veeam Storage inventory.However, you are unable to select your secondary ONTAP cluster as a secondary target for your Veeam backup job.In ONTAP System Manager, which action solves this problem?

Initialize SnapVault for the volume that you want to back up.

Select "Make Snapshot directory visible" for each volume that you want to back up.

Create a vsadmin account to grant cluster access to Veeam for each volume that you want to back up.

Change the security style to NTFS for the volume you want to back up.

Initialize SnapVault for the volume that you want to back up.

You are the administrator of an ONTAP cluster, where the majority of users are using Linux machines with home directories mounted using NFS. You keep six daily, four weekly, and one monthly Snapshot copy locally. However, you do not replicate the data to another instance of ONTAP. One of your users reports having accidentally deleted a file, but does not remember the self-serve restore procedure.How does the user restore the file without having administrator privileges on the cluster?

Copy the deleted file from the .snapshot directory.

Issue the snapshot restore-file command.

Copy the deleted file from the .snapshot directory.

Issue the volume snapshot restore command.

Using ONTAP System Manager, restore the volume from a Snapshot copy.

You want to use SnapCenter to restore an MS SQL database on iSCSI LUNs from a previous application- consistent snapshot.In this scenario, what is required to accomplish this task?

Confirm that the database server is running on the host.

Confirm multipathing for iSCSI is enabled on the host.

Confirm that the database server is running on the host.

Confirm that the database server is not running on the host.

Confirm that the iSCSI service is disabled on the host.

You want to create an application-consistent Snapshot copy by using SnapCenter software. What is required to accomplish this task?

NetApp NFS Plug-in for VMware VAAI

You have successfully deployed a primary and a secondary ONTAP cluster. You want to set up an intercluster SnapMirror relationship between your primary and secondary sites.In this scenario, which two actions are required before accomplishing this task? (Choose two.)

The primary and secondary clusters must be peered.

The Snapshot schedule must be configured.

After deploying an ONTAP Select 2 node HA cluster at a remote site, you successfully perform manual takeover and giveback before placing the cluster into production. After the cluster runs in production for a week, you notice that you can no longer perform a manual takeover.In this scenario, what are two causes of this problem? (Choose two.)

There is a network disruption between sites.

The HA interconnect cables have been removed.

There is a network disruption between sites.

The vSphere HA service has failed.

The HA interconnect cables have been removed.

You have set up a SnapMirror relationship between two SVMs for data protection. The data in the source volume is unavailable due to an event related to a virus infection leading to data corruption.In this scenario, which three actions are required to activate the SnapMirror destination volume and provide data access to the users? (Choose three.)

Configure the destination volume for data access.

Verify the status of the source and destination volumes.

Perform a SnapMirror break operation.

Perform a SnapMirror quiesce operation.

Disable the source volume by taking it offline.

Configure the destination volume for data access.

Verify the status of the source and destination volumes.

Perform a SnapMirror break operation.

A customer is using SnapMirror to replicate their data to a remote site. They notice that storage efficiency is nor preserved, and the amount of data at the destination is higher than expected.In this scenario, which configuration in the destination volume would cause this issue?

There is an existing FlexClone volume on the destination.

Post process deduplication is enabled on the destination.

The volumes are not thin-provisioned on the destination.

Post process compression is enabled on the destination.

There is an existing FlexClone volume on the destination.

You have deployed volume-level replication with NetApp Synchronous SnapMirror replication technology.In this scenario, which two statements are true? (Choose two.)

In Sync mode, the application is allowed to continue writing to the primary storage if the write to the secondary storage is not completed.

In StrictSync mode, the application I/O fails if the write to the secondary storage is not completed, thereby ensuring that the primary and secondary storage are identical.

In Sync mode, the application I/O fails if the write to the secondary storage is not completed, thereby ensuring that the primary and secondary storage are identical.

In StrictSync mode, the application is allowed to continue writing to the primary storage if the write to the secondary storage is not completed.

In Sync mode, the application is allowed to continue writing to the primary storage if the write to the secondary storage is not completed.

In StrictSync mode, the application I/O fails if the write to the secondary storage is not completed, thereby ensuring that the primary and secondary storage are identical.

A customer has a 2-node ONTAP Select HA cluster deployed on the same site. The ONTAP Deploy VM has been accidentally deleted. The 2-node ONTAP Select HA cluster is still serving data, but the storage failover capability has been disabled.In this scenario, what would you do to reestablish the storage failover capability on your cluster?

Deploy two single-node ONTAP Select clusters and migrate all exiting data.

Deploy two ONTAP Deploy VMs and a new 2-node ONTAP Select cluster and then migrate the data.

Deploy a secondary ONTAP Deploy VM and restore the 2-node cluster quorum.

Deploy two single-node ONTAP Select clusters and migrate all exiting data.

Deploy a new 4-node ONTAP Select cluster and distribute data from the existing cluster.

Your customer wants to implement SVM DR, but the customer is not certain whether the identitypreserve parameter should be enabled. The customer explains that the source and destination clusters are in different network subnets.In this scenario, which SVM DR solution should the customer use?

SVM DR with the identity-preserve parameter enabled and the default SnapMirror policy.

SVM DR using the identity-preserve parameter disabled and the default SnapMirror policy.

SVM DR using the identity-preserve parameter enabled and then administratively take the data LIFs offline on the DR cluster.

SVM DR with the identity-preserve parameter enabled and a SnapMirror policy with the discardconfigs network parameter.

SVM DR with the identity-preserve parameter enabled and the default SnapMirror policy.

Click the Exhibit button. Referring to the exhibit, which two statements are true? (Choose two.)

The source volume is unavailable for I/O

A manual re-synchronization is needed.

The source volume is available for I/O.

A manual re-synchronization is not needed.

The source volume is unavailable for I/O

A manual re-synchronization is needed.

You want to configure peering between two existing ONTAP HA clusters.In this scenario, which three steps would you perform to accomplish this task? (Choose three.)

Create a cluster peering relationship.

Create a SVM peering relationship.

Create a cluster peering relationship.

Create a SVM peering relationship.

An administrator notices that a NAS volume has been filled completely by active data and Snapshot copies that have expanded over the Snap reserve. The volume is no longer writable.In this scenario, which two actions must you take to make the volume writable again? (Choose two.)

Delete Snapshot copies until space is available.

Delete the SnapVault relationships.

Delete Snapshot copies until space is available.

Delete the files in the active file system.

Delete the SnapMirror relationships.

Delete the SnapVault relationships.

Click the Exhibit button. Referring to the exhibit, what must be performed on nodes aff-01 and aff-02 to allow them to failover and giveback properly?

Move the LIFs to their home ports.

Disconnect the HA connection between the nodes.

Reboot aff-02 to resolve the LIF issue.

No additional action is necessary.

Move the LIFs to their home ports.

You are creating a SnapVault relationship and have concerns about the available capacity on the destination.In this scenario, which three factors must you consider when you size the destination volume?(Choose three.)

the autogrow settings on the source volume

the number of Snapshot copies to retain on the destination

the number of Snapshot copies to retain on the source

the autogrow settings on the source volume

the number of Snapshot copies to retain on the destination

the rate of data increase on the source

the number of Snapshot copies to retain on the source

Network Appliance NS0-527 Practice Test 2 - Free Online Exam Prep & Questions

Question 1 / 40

What are two ways to determine if your SnapMirror relationships are up-to-date? (Choose two.)

Use Active IQ and navigate to Cluster -> Volumes -> Protection.

Use Active IQ Unified Manager and navigate to Protection -> Volume Relationships.

Use ONTAP System Manager and navigate to Protection -> Volume Relationships on the destination cluster.

Use ONTAP System Manager and navigate to Protection -> Volume Relationships on the source cluster.

Comment (0)

Network Appliance NS0-527 Practice Test 2

Question

Network Appliance NS0-527 Practice Tests

Practice Tests