ExamGecko
Search Search Login
Home Home / Network Appliance / NS0-593

Network Appliance NS0-593 Practice Test - Questions Answers

Question list
Search
Search

List of questions

Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

Your customer installed the shelf firmware for their NS224 shelf over a week ago, and the firmware has not upgraded on shelf 1 module B. The customer wants to know what the next steps would be to get the firmware upgraded after verifying that the shelf firmware is indeed loaded onto the system. Which step would you perform to complete the firmware upgrade?
You have a 2-node NetApp FAS2750 switchless cluster with twenty-four 1.8 TB disks that is experiencing performance issues. Upon investigation, you discover several type B consistency points. Referring to the exhibit, which corrective action would address these consistency points?
You have recently discovered that NetApp ONTAP Cloud Manager is not sending AutoSupport messages to NetApp. In this scenario, what would solve this Issue?
The motherboard of Node-01 is being replaced. To perform this task, a takeover was Initiated from Node-02. Node-02 panics showing the string below. PANIC; Permanent errors on all HA mailbox disks (while marshalling header) in SKprocess fnmbx_instanceWorker on release 9.5P8 (C) What has happened in this situation?
A customer wants to connect a NetApp AFF A700 system to a 40GbE switch. The controllers have a 10/40G Ethernet card in slot 4 for this purpose. The link comes up fine on node 2, but it will not come up on node 1. You look at the AutoSupport data for the nodes in question and see the output shown in the exhibit. What is the cause of the customer's problem?
Your customer complains about missing volume snapshot copies on a SnapMlrror destination. While investigating this case, you notice an executed SnapMirror resync operation in the event logs of the system. In this scenario, what Is the cause of this problem?
After a motherboard replacement on a NetApp AFF A300 in a SAN environment, the customer states that ports 0e and 0f are unable to connect to the fabric. The ports report "offline". What would you examine first to troubleshoot the issue?
Which two automation methods does NetApp ONTAP Select support? (Choose two.)
Your customer mentions that they have accidentally destroyed both root aggregates in their twonode cluster. In this scenario, what are two actions that must be performed? (Choose two.)
When an administrator tries to create a share for an existing volume named voll, the process fails with an error. Referring to the exhibit, what Is the reason for the error?

Question 1

Report
Export
Collapse

When you review performance data for a NetApp ONTAP cluster node, there are back-to-back (B2B) type consistency points (CPs) found occurring on the loot aggregate.

In this scenario, how will performance of the client operations on the data aggregates be affected?

A.
During B2B processing, clients will be unable to write data.
A.
During B2B processing, clients will be unable to write data.
Answers
B.
Data aggregates will not be affected by B2B processing on another aggregate.
B.
Data aggregates will not be affected by B2B processing on another aggregate.
Answers
C.
During B2B processing, all I/O to the node is stopped.
C.
During B2B processing, all I/O to the node is stopped.
Answers
D.
During B2B processing, clients will be unable to read data.
D.
During B2B processing, clients will be unable to read data.
Answers
Suggested answer: B

Question 2

Report
Export
Collapse

Recently, a CIFS SVM was deployed and is working. The customer wants to use the Dynamic DNS (DDNS) capability available in NetApp ONTAP to easily advertise both data UFs to their clients.

Currently. DNS is only responding with one data LIF. DDNS is enabled on the domain controllers.

Referring to the exhibit, which two actions should be performed to enable DDNS updates to work?

(Choose two.)

A.
Disable the -vserver-fqdn parameter for the SVM DDNS services.
A.
Disable the -vserver-fqdn parameter for the SVM DDNS services.
Answers
B.
Remove the NFS protocol from the cifs_01 data LIF.
B.
Remove the NFS protocol from the cifs_01 data LIF.
Answers
C.
Enable the -use-secure parameter for the SVM DDNS services.
C.
Enable the -use-secure parameter for the SVM DDNS services.
Answers
D.
Enable the -is-enabled parameter for the SVM DDNS services
D.
Enable the -is-enabled parameter for the SVM DDNS services
Answers
Suggested answer: A, D

Question 3

Report
Export
Collapse

A customer is calling you to troubleshoot why users are unable to connect to their CIFS SVM.

Referring to the Information shown in the exhibit, what Is the source of the problem?

A.
The v1db database is offline.
A.
The v1db database is offline.
Answers
B.
The aggregate aggr2 has a failed disk.
B.
The aggregate aggr2 has a failed disk.
Answers
C.
The databases On Node03 must be Switched from secondary to master.
C.
The databases On Node03 must be Switched from secondary to master.
Answers
D.
The broken disk in Node03 is the source of the problem.
D.
The broken disk in Node03 is the source of the problem.
Answers
Suggested answer: C

Question 4

Report
Export
Collapse

You have a customer who is concerned with high CPU and disk utilization on their SnapMirror destination system. They are worried about high CPU and disk usage without any user operations.

In this situation, what should you tell the customer?

A.
Suggest that the customer manually cancel any scanners on the destination to reduce CPU usage.
A.
Suggest that the customer manually cancel any scanners on the destination to reduce CPU usage.
Answers
B.
Explain that background tasks such as SnapMirror throttle up in the absence of user workload.
B.
Explain that background tasks such as SnapMirror throttle up in the absence of user workload.
Answers
C.
Suggest that the customer throttle their SnapMirror relationships to reduce resource consumption.
C.
Suggest that the customer throttle their SnapMirror relationships to reduce resource consumption.
Answers
D.
Explain that only user workload should use the CPU and Investigate further.
D.
Explain that only user workload should use the CPU and Investigate further.
Answers
Suggested answer: A

Question 5

Report
Export
Collapse

You are attempting to connect a NetApp ONTAP cluster to a very complex network that requires LIFs to fail over across subnets.

How would you accomplish this task?

A.
Configure an equal number of UFs on each subnet.
A.
Configure an equal number of UFs on each subnet.
Answers
B.
Configure VIP LIFs using OSPF.
B.
Configure VIP LIFs using OSPF.
Answers
C.
Configure VIP LIFs using BGP.
C.
Configure VIP LIFs using BGP.
Answers
D.
Configure a I IF failover policy for each subnet inside a single broadcast domain.
D.
Configure a I IF failover policy for each subnet inside a single broadcast domain.
Answers
Suggested answer: C

Question 6

Report
Export
Collapse

Which two statements about NetApp Cloud Volumes ONTAP licenses ate true? (Choose two.)

A.
Having an Essentials package enables you to convert to another licensing option.
A.
Having an Essentials package enables you to convert to another licensing option.
Answers
B.
Capacity-based license packages support only single-node configurations.
B.
Capacity-based license packages support only single-node configurations.
Answers
C.
BYOL licenses are purchased directly from NetApp.
C.
BYOL licenses are purchased directly from NetApp.
Answers
D.
AWS Marketplace contracts cannot be mixed with BYOL.
D.
AWS Marketplace contracts cannot be mixed with BYOL.
Answers
Suggested answer: B, C

Question 7

Report
Export
Collapse

Your customer complains that u host will constantly report losing a connection to the iSCSl target and then report that the session was reestablished.

As shown in the exhibit, what is a cause of this flapping?

A.
A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 have the same IQN.
A.
A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 have the same IQN.
Answers
B.
A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are in different initiator groups.
B.
A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are in different initiator groups.
Answers
C.
A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are accessing the same LUN.
C.
A host with an IP address of 172.20.10.80 and a second host with an IP address of 10.10.20.60 are accessing the same LUN.
Answers
D.
A host with an IP address of 172.20.10.80 and a second IP address of 10.10.20.60 is accessing different LUNs.
D.
A host with an IP address of 172.20.10.80 and a second IP address of 10.10.20.60 is accessing different LUNs.
Answers
Suggested answer: C

Question 8

Report
Export
Collapse

A storage administrator reports that a monitoring toot is reporting that the storage controller reads between 90% to 93% CPU use. You run the sysstat -m command against the node in question.

Referring to the exhibit, which statement is correct?

A.
The customer should be advised to exclude certain workflows to reduce use.
A.
The customer should be advised to exclude certain workflows to reduce use.
Answers
B.
High network exempt use could be a problem.
B.
High network exempt use could be a problem.
Answers
C.
You should immediately investigate further by gathering perfstat data and opening a support case.
C.
You should immediately investigate further by gathering perfstat data and opening a support case.
Answers
D.
The CPU Is not a first-order monitoring metric for ONTAP.
D.
The CPU Is not a first-order monitoring metric for ONTAP.
Answers
Suggested answer: C

Question 9

Report
Export
Collapse

You have a 4-node NetApp ONTAP 9.8 cluster with an AFF A400 HA pair and a FAS8300 HA pair with 16 TB NL-SAS drives. You are asked to automatically tier 150 TB of Snapshot copy data from the AFF A400 aggregates to the FAS8300.

In this scenario, which ONTAP license must be added to the cluster to accomplish this task?

A.
S3 license
A.
S3 license
Answers
B.
VE license
B.
VE license
Answers
C.
TPM license
C.
TPM license
Answers
D.
FabricPool license
D.
FabricPool license
Answers
Suggested answer: C

Question 10

Report
Export
Collapse

Your customer Informs you about SnapMlrror problems after upgrading NetApp ONTAP software to a newer version. After investigating the event logs and the SnapMirror history, you see information about delayed updates of the

SnapMirror relationships.

How would your customer prevent such problems in the future?

A.
Quiesce the SnapMirror relationships before upgrading the ONTAP software.
A.
Quiesce the SnapMirror relationships before upgrading the ONTAP software.
Answers
B.
Verify that the cabling of the hardware port that Is responsible for SnapMirror transfers Is correct.
B.
Verify that the cabling of the hardware port that Is responsible for SnapMirror transfers Is correct.
Answers
C.
Modify the schedules of the SnapMirror relationships after upgrading the ONTAP software.
C.
Modify the schedules of the SnapMirror relationships after upgrading the ONTAP software.
Answers
D.
Delete the SnapMirror relationships and create them new after upgrading the ONTAP software.
D.
Delete the SnapMirror relationships and create them new after upgrading the ONTAP software.
Answers
Suggested answer: B
Total 60 questions
Go to page: of 6
ExamGecko

Copyright @2023 ExamGecko | All right reserved

Mail us: [email protected]
About us
Contact us
Twitter X
Facebook
Medium
Convert VPLUS to PDF
Open VPLUS files Easily and Quickly
Privacy Policy
Disclaimer
Terms