ExamGecko
Search Search Login
Home Home / CompTIA / SK0-005
Question list
Search
Search

List of questions

Search
Open VPLUS File
Convert VPLUS to PDF

Related questions

A technician needs to replace two RAID controllers on a database server as part of an upgrade. The server has six external storage arrays and eight internal disks that are controlled by the two RAID controllers. The technician completes the replacement and powers the systems back on, but the server OS detects several missing disks in the configuration. Which of the following steps should the technician take first to resolve this issue?
An administrator notices a server is offline. Upon checking the console, the administrator discovers the server is stuck at: Configuring Memory............. After a reboot, the server still exhibits the same behavior. The administrator is able to log in to the OOB remote management but is unable to log in to the server. Which of the following is the most likely cause of this issue?
A user is unable to access the database server from a workstation. All other workstations are able to access the database server. The technician issues the following command to check the workstation: userGhost:!# nmap localhost Nmap scan report for localhost (127.0.0.1) Host is up (0.001 ms latency). Not shown: 1023 closed ports PORT STATE SERVICE 3306 open mysql Which of the following should the technician perform next to allow access?
Which of the following would allow a server administrator to ensure all maximum available resources are being utilized?
A server administrator created a new script and included the path to the script binary as the first line of the script. Which of the following scripting languages did the administrator most likely use?
A junior administrator reported that the website used for anti-malware updates is not working. The senior administrator then discovered all requests to the anti-malware site are being redirected to a malicious site. Which of the following tools should the senior administrator check first to identify the potential cause of the issue?
A technician is setting up a repurposed server. The minimum requirements are 2TB while ensuring the highest performance and providing support for one drive failure. The technician has the following six drives available: 500GB, 10,000rpm 600GB, 10,000rpm 500GB, 7,200rpm 500GB, 10,000rpm 600GB, 15,000rpm 600GB, 10,000rpm Which of the following drive selections should the technician utilize to best accomplish this goal?
Which of the following factors would most likely impact the selection of an organization's cloud provider?
A server administrator is tasked with resolving an issue with the server's local storage. The administrator turns on the server and only two out of the four drives are found. After several reboots, an additional hard drive connects and disconnects randomly. Which of the following is most likely the cause?
A technician is configuring a new server with four disks for the development team. The requirements are disk redundancy and maximum usable disk capacity. Which of the following RAID levels should be used for this server?

Question 3 - SK0-005 discussion

Report
Export

After configuring IP networking on a newly commissioned server, a server administrator installs a straight- through network cable from the patch panel to the switch. The administrator then returns to the server to test network connectivity using the ping command. The partial output of the ping and ipconfig commands are displayed below:

The administrator returns to the switch and notices an amber link light on the port where the server is connected. Which of the following is the MOST likely reason for the lack of network connectivity?

A.
Network port security
Answers
A.
Network port security
B.
An improper VLAN configuration
Answers
B.
An improper VLAN configuration
C.
A misconfigured DHCP server
Answers
C.
A misconfigured DHCP server
D.
A misconfigured NIC on the server
Answers
D.
A misconfigured NIC on the server
Suggested answer: D

Explanation:

A misconfigured NIC on the server is the most likely reason for the lack of network connectivity. The output of the ping command shows that the server is unable to reach its default gateway (10.0.0.1) or any other IP address on the network. The output of the ipconfig command shows that the server has a valid IP address (10.0.0.10) and subnet mask (255.255.255.0) but no default gateway configured. This indicates that there is a problem with the NIC settings on the server, such as an incorrect IP address, subnet mask, default gateway, DNS server, etc. A misconfigured NIC can also cause an amber link light on the switch port, which indicates a speed or duplex mismatch between the NIC and the switch.

Show Answer
asked 02/10/2024
Ajayi Johnson
45 questions
PreviousPreviousNextNext
User
Your answer:
0 comments
Sorted by

Leave a comment first

ExamGecko

Copyright @2023 ExamGecko | All right reserved

Mail us: [email protected]
About us
Contact us
Twitter X
Facebook
Medium
Convert VPLUS to PDF
Open VPLUS files Easily and Quickly
Privacy Policy
Disclaimer
Terms