Refer to the exhibit. A developer creates an OmniScript display FirstName, LastName, and BirthDate of a contact using a Type Ahead Block. The DataRaptor used in the Type Ahead has been tested and fetches the correct data.When previewing Omniscript, the developer enters a name in the Type Ahead and makes a selection of a contact from the list. However, the text fields FirstName. LastName, and BirthDate are not getting populated with the data.What is the reason that the fields fail to display the fetched data?

FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.

Lookup Mode is not selected in the properties of the Type A Head Block.

Use Data JSON is not selected in the properties of the Type Ahead Block.

FirstName, LastName, and BirthDate are not placed inside the Type ahead Block.

The Typeghead ley is not in the correct format

When launching an OmniScript from an action on a FlexCard, the OmniScript displays, but no Salesforce data is populated:Which two errors could cause this behavior?Choose 2 answers

The Id Field for Actions in the FlexCard is blank.

In the DataRaptor Extract Action, the Input Parameters Filter Value is misspelled.

The Id Field for Actions in the FlexCard is blank.

There is no active version of the Data Raptor Extract.

There is no active version of the OmniScript

In the DataRaptor Extract Action, the Input Parameters Filter Value is misspelled.

A healthcare company wants to enable its subscribers to add, edit, or delete dependents related to their policy Community portal. The developer on the project decides to use an MniScript.How should the developer configure the OmniScript to provide this functionality?

Use an Edit Block element configured with Remote Actions.

Use an Edit Block element configured with SOQL statements.

Use an Input Block element and a DataRaptor Post Action element.

Use a Text Block element and a Remote Action element.

What should a developer's first step be when troubleshooting whether a DataRaptor Extract is retrieving data?

Add a key/value pair in the DataRaptor to test it.

Go to the Lightning Console and reload the page to test.

Go to the PREVIEW tab In OmniScript to test.

Deactivate the card and layout, and go to the PREVIEW tab for the card to test.

Add a key/value pair in the DataRaptor to test it.

A customer sets up two LWC OmniScripts, one embedded into another. AccountId is set in a Set Values element in the parent OmniScript. The Accountid set in the parent OmniScript is used to set another Set values element ContextAccountId in the emvedded OmniScript. The embedded OmniScript is activated.While previewing the OmniScript flow from the parent, it is found that Account I set correct in the parent OmniScript. However ContextAccount in the embedded OmniScript is not set with the Accountid from parent OmniScript. On previewing the embedded OmniScript individually. It is found that ContextAccountId is set correctly.What is the reason for this? Refer to the exhibit below.

The WLC PubSub Messge flag in the Set Values action of the parent OmniScript has not been set.

The flag passData.JSON in the parent OmniScript in not configured correctly.

A developer failed to include a Navigate Action Element to pass data from the parent OmniScript.

Both parent and embedded OmniScripts have the same element name for the Set Values element.

Refer to the exhibit below. What is the marge code needed for this integration procedure structure to pass a CaseNumber node from the DRReadCase DataRaptor Extract Action to the HTTP Action's HTTP URL?

MTTOPDetCaseDetail: CaseNumber%

A developer builds a new OmniScript. It contains a Set Values element with a ContextId key/value pair that was used during testing.What should the developer do before moving the OmniScript to a production org?

Delete or Deactivate the Set Values element.

Update the ContextId value to specify an id from the Production org.

Add a Show/Hide condition on the Set Values element.

Delete or Deactivate the Set Values element.

Deactivate the contextId key/value pair

An OmniScript displays data from an API using Integration Procedure, but some of the data is missing.Which two configuration errors could cause this? Choose 2 answers

The element name for the missing data does not match the JSON node key in the Integration Procedure Response.

The missing data is trimmed in the Integration Procedure Action Response JSON Path.

The element name for the missing data does not match the JSON node key in the Integration Procedure Response.

The Integration Procedure Preview Input Parameters do not match the JSON sent from the OmniScript.

The JSOW sent from the Integration Procedure Action does not match any of the Original Input for the Integration Procedure

The missing data is trimmed in the Integration Procedure Action Response JSON Path.

A developer creates an Integration Procedure with a Set Values and a DataRaptor Extract Action that requires AccountId as a key. When the developer previews the Integration Procedure, the developer enters the AccountId correctly and execute the Preview. The developer sees the data extract by the DataRaptor in the Debug Log, but the response is empty.What is the likely cause of this issue?

A Response Action was not added to the integration Procedure.

The DataRaptor Action did not have the add response Ro Response JSON property set to true.

The Response cannot be previewed directly.

A Response Action was not added to the integration Procedure.

The AccountId used for the preview is invalid.

A developer creates a new FlexCard to display customer data and actions, such as updating billing information and changing the contact for the customer account. The FlexCard contains 10 fields and 5 actions.During testing, several fields display with the correct data, but one of the fields shows only the label.What could cause this?

The field is null 0 the Salesforce record.

The fields have exceeded the maximum number allowed on the card.

The field is null 0 the Salesforce record.

{recordld} us misspelled in the Data Source Input Map.

There are no test parameters configured.

Which two in an integration Procedure or DataRaptor can execute a function like CONCAT or DATEDIFF?Choose 2 answers

In a Set Values Action in a Value field.

In a Remote Action m an Additional Output value field.

In a Set Values Action in a Value field.

In a DataRaptor in an Output Tab Output JSON Path.

In a DataRaptor Action in an Input Parameters value field.

In a Remote Action m an Additional Output value field.

An integration procedure contains a Remote Action element that calls a method of an APEX class. The method requires two fields are input: Accountid and ProductId. The integration Procedure data JSON contains the following nodes:How should the Remote Action element be configured to pass the data correctly to the method?

Set Return Only Additional Output to true, and add the following Key/Value pairs to additional input.

Check the Send Only Additional Input checkbox, and the following/ value pairs to Additional input:

Set Return Only Additional Output to true, and add the following Key/Value pairs to additional input.

Check the DataRaptor Transform checkbox, and add the following Key/Value pairs to Output JSON Path:

Add the following to Send JSON Path: accountId: %Accountd% ProductId% Details Products%

A customer sets up to LWC Omniscripts, one embedded into another. Account is set in a Set Values element in the parent Omniscript.The AccountId set in the parent Omniscript is used to another Set Values element ContextAccountid in the embedded OmniScript. The embedded Omniscript is activated.While previewing the OmniScript flow from the parent, it is found that Account is set correctly in the parent OmniScript. However. ContextAccountId in the embedded OmniScript is not set with the AccountId from parent Omniscript. On previewing the embedded OmniScript individually, it is found that ContextAccountId is set correctly.What is the reason for this? Refer to the exhibit below.

The LWC PubSub Message flag in the Set Values action of the parent has not been set.

Both parent and embedded OmniScripts have the same element name for the Set values element.

A developer failed to include a Navigation Element to pass data from the parent OmniScript.

The LWC PubSub Message flag in the Set Values action of the parent has not been set.

The flag passDataJSON in the parent OmniScript in not configured correctly.

A developer needs to change some field labels on a FlexCard. The FlexCard is currently deployed to production. The developer that the best course of action is to version the FlexCard rather than cloning it.Which factor would lead the developer to this decision?

The new version of the FlexCard will be used in a new Console, and the current version of the FlexCard should remain unchanged.

Another team member is developing new action, fields and styling for the current version of the FlexCard.

The new and current versions will be displayed together on the same target.

All instance of the FlexCard must be updated with the changes.

A developer needs to transform contact data into a JSON array. Given the input JSON shown above, what are two ways a developer could configure a DATARaptor transform to achieve the expected Output JSON? Choose 2 answers

Set the Input JSON path as List(Contact) and the OutputJSON Path as Contact.

Set the Input JSON Path as Contact the out JSON Path as contact and output Data type as List.

Use a formula LIST(Contact), and add the output of the formula as the input in the Transform tab.

Set the Input JSON path as List(Contact) and the OutputJSON Path as Contact.

Set the Input JSON Path as Contact the out JSON Path as contact and output Data type as List.

Set the input JSON Path as Contact and the OutPut JSON Path as List (Contact)

A developer is creating a FlexCard for a new Community page. The FlexCard will display case information along with action to close the case and update the case. And it will be styled using the Community's theme.What must be developer do to configure the FlexCard for deployment in a Community?

Set the Target property in publish Options to Communitypage''

Add the FlexCard's API name to FlexCard Player component

Set the Target property in publish Options to Communitypage''

Configure the Component visibility in the custom Component.

Set the Developer property in Card Configuration to ''Community''

Why would a developer clone an Integration Procedure instead of versioning it?

The new Integration Procedure will be used independently

The new Integration Procedure uses a Cache Block.

The new Integration Procedure it replacing stub data.

The new Integration Procedure will be used independently

The new Integration Procedure is Chainable.

What two advantages does a DataRaptor Turbo Extract have over a standard DataRaptor Extract?Choose 2 answers

It has better performance at runtime

It populates data in PDF and DocuSign format

It has better performance at runtime

It supports complex field mappings

A developer configure a Flexcard with a DataRaptor data source that uses the params.id as an. When the developer clicks Views Data on the FlexCard, valid data displays. However, when the developer previews the layout, the FlexCard does not display. What could cause this error?Choose 2 answers

The RecordId in the Test Data Source settings ins for the wrong record type.

The attribute haven't been configured to pass the data to the fields.

The Data Node field for the FlexCard is empty.

The RecordId in the Test Data Source settings ins for the wrong record type.

The attribute haven't been configured to pass the data to the fields.

There is not Salesforce record for the FlexCard based on the RecordId in the layout's Test Data Source Settings.

A developer is configuring a DataRaptor Load to Save contract data. The developer needs to set the record type of the contact using DeveloperName.Which two configuration actions should the developer take to set this up in the DataRaptor Load?

Check is Lookup property when mapping the fields.

Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.

Check is Lookup property when mapping the fields.

Add Link to RecordType object in the Contact Object with the id field of RecordType object.

Select RecordType in the Lookup object list. Development in the lookup Field list, and ID in the Lookup Requested Field list.

Select RecordType in the Lookup Object list. ID in the Lookup Field list, and Development in the Lookup requested Field list.

A developer needs to display the following information together on one FlexCard:* Account name, address, phone number, website* Primary contact first name, contact name, address, phone number, emailThe account information must always be visible, and the contact information should only be visible as needed by the user.What approach should the developer use to display the contact information on the card?

Set the collapsible property on the block element

Set the class'' collapsible'' on the block element

Set the collapsible property on the block element

Use a conditional FlexCard State

A developer is creating an OmniScript that provisions trail orgs to their customers. The following text block in the Omniscript uses a merge code to display the ID for the new trail org:

To %%sDetails: Customer|0: ID%%

A developer creates a DataRaptor Extract to retrieve data to pass to an external service. The external service expects the field value to be integer. However, the DataRaptor is sending it as a string.Which action can the developer take to fix this?

In the DataRaptor Output tab, select the Output Data Type of that field to Integer.

In the DataRaptor Output tab, enter the default value as 0 on the field.

In the DataRaptor Extract tab, set the Input Data Type field to Integer.

In the DataRaptor Formula tab, define a formula using the function TOINTEGER and use the formula as output.

Salesforce Certified OmniStudio Developer Practice Test 1

A developer creates a Flexcard that displays a contact's mailing address and passes the contact's postal code to a child FlexCard.

When configuration text elements in the child FlexCard, what syntax should a developer use to refer to the contact's postal code?

{Postalcode}

{Parent.postalcode}

{Records.postalcode}

{Params.postalcode}

Comment (0)

Salesforce Certified OmniStudio Developer Practice Test 1

Question

Salesforce Certified OmniStudio Developer Practice Tests

Practice Tests