A server administrator is configuring the IP address on a newly provisioned server in the testing environment. The network VLANs are configured as follows: The administrator configures the IP address for the new server as follows:IP address: 192.168.1.1/24Default gateway: 192.168.10.1A ping sent to the default gateway is not successful. Which of the following IP address/default gateway combinations should the administrator have used for the new server?

IP address: 192.168.10.2/24Default gateway: 192.168.10.1

IP address: 192.168.1.2/24Default gateway: 192.168.10.1

IP address: 192.168.10.3/24Default gateway: 192.168.20.1

IP address: 192.168.10.24/24Default gateway: 192.168.30.1

Users at a company work with highly sensitive dat

The security department implemented an administrative and technical control to enforce leastprivilege access assigned to files. However, the security department has discovered unauthorized data exfiltration. Which of the following is the BEST way to protect the data from leaking?

Enforce the lock-screen feature.

A server administrator needs to create a new folder on a file server that only specific users can access. Which of the following BEST describes how the server administrator can accomplish this task?

Create a group that includes all users and assign the proper permissions.

Create a group that includes all users and assign it to an ACL.

Assign individual permissions on the folder to each user.

Create a group that includes all users and assign the proper permissions.

Assign ownership on the folder for each user.

A systems administrator needs to configure a new server and external storage for a new production application environment. Based on end-user specifications, the new solution needs to adhere to the following basic requirements:

Application data IOPS performance is a must.

Install the OS on a RAID 0 array.

Install the OS on a RAID 1 array.

The OS must be installed in a separate disk partition. In case of hard drive failure, it cannot be affected.

Application data IOPS performance is a must.

Data availability is a high priority, even in the case of multiple hard drive failures.Which of the following are the BEST options to comply with the user requirements? (Choose three.)

Install the OS on a RAID 0 array.

Install the OS on a RAID 1 array.

Configure RAID 1 for the application data.

Configure RAID 5 for the application data.

Use SSD hard drives for the data application array.

Use SATA hard drives for the data application array.

Use a single JBOD for OS and application data.

A server administrator is swapping out the GPU card inside a server. Which of the following actions should the administrator take FIRST?

Inspect the GPU that is being installed.

Ensure the GPU meets HCL guidelines.

Disconnect the power from the rack.

A systems administrator has noticed performance degradation on a company file server, and one of the disks on it has a solid amber light. The administrator logs on to the disk utility and sees the array is rebuilding. Which of the following should the administrator do NEXT once the rebuild is finished?

Swap the drive and initialize the disk.

Restore the server from a snapshot.

Restore the server from backup.

Swap the drive and initialize the disk.

Swap the drive and initialize the array.

Users have noticed a server is performing below Baseline expectations. While diagnosing me server, an administrator discovers disk drive performance has degraded. The administrator checks the diagnostics on the RAID controller and sees the battery on me controller has gone bad. Which of the following is causing the poor performance on the RAID array?

The controller has disabled the write cache.

The controller cannot use all the available channels.

The controller has lost its configuration.

Users cannot access a new server by name, but the server does respond to a ping request using its IP address. All the user workstations receive their IP information from a DHCP server. Which of the following would be the best step to perform NEXT?

Examine the DNS to see if the new server record exists.

Run the tracert command from a workstation.

Examine the DNS to see if the new server record exists.

Correct the missing DHCP scope.

Update the workstation hosts file.

An administrator is investigating a physical server mat will not Boot into the OS. The server has three hard drives configured in a RAID 5 array. The server passes POST, out the OS does not load. The administrator verities the CPU and RAM are Doth seated correctly and checks the dual power supplies. The administrator then verifies all the BIOS settings are correct and connects a bootable USB drive in the server, and the OS loads correctly. Which of the following is causing the issue?

There are multiple failed hard drives.

There are mismatched RAM modules.

A server administrator added a new drive to a server. However, the drive is not showing up as available. Which of the following does the administrator need to do to make the drive available?

Configure the drive as dynamic.

CompTIA SK0-005 Practice Test 3 - Free Online Exam Questions 81-120

Question 1 / 40

A server is reporting a hard drive S.M.A.R.T. error. When a technician checks on the drive, however, it appears that all drives in the server are functioning normally. Which of the following is the reason for this issue?

A S.M.A.R.T. error is a predictive failure notice. The drive will fail in the near future and should be replaced at the next earliest time possible

A S.M.A.R.T. error is a write operation error. It has detected that the write sent to the drive was incorrectly formatted and has requested a retransmission of the write from the controller

A S.M.A.R.T. error is simply a bad sector. The drive has marked the sector as bad and will continue to function properly

A S.M.A.R.T. error is an ECC error. Due to error checking and correcting, the drive has corrected the missing bit and completed the write operation correctly.

Comment (0)

CompTIA SK0-005 Practice Test 3

Question

CompTIA SK0-005 Practice Tests

Practice Tests