Scenario: A Citrix Administrator is configuring load balancing on a Citrix ADC appliance for the company web servers. The administrator needs to create a custom monitor that will look for a specific keyword response from the website and will be used to keep the services in an UP state. Which type of monitor can the administrator create to accomplish this scenario?

HTTP-ECV monitor with the keyword in the Special Parameters - Receive String field.

A HTTP monitor with the keyword in the Special Parameters - Response Codes field.

A TCP monitor with the keyword in the Special Parameters - Response Code field.

An UDP-ECV monitor with the keyword in the Special Parameters - Receive String field.

Which step can a Citrix Administrator take in order to use the default compression policies?

Bind the default compression policies to the virtual server.

Enable compression on the associated bound services.

Disable the Citrix ADC Compression feature at a global level.

Select the compression algorithm (gzip/deflate/identity).

Which scenario will cause automatic high availability (HA) synchronization to fail?

Manually forced synchronization

A configuration change to the primary Citrix ADC

What two options are limitations of a typical Global Server Load Balancing (GSLB) setup? (Choose two.)

Apply spillover policies on a subset of GSLB services and the user CANNOT have a backup for a subset of GSLB services.

Restrict the selection of a GSLB service from a subset of GSLB services bound to a GSLB virtual server for the given domain.

An administrator CANNOT define a backup for a backup Vserver in an active standby GSLB setup for a given GSLB domain

Apply spillover policies on a subset of GSLB services and the user CANNOT have a backup for a subset of GSLB services.

Restrict the selection of a GSLB service from a subset of GSLB services bound to a GSLB virtual server for the given domain.

Any given GSLB Vserver can load-balance only one FQDN.

Click the 'Exhibit' button to view the screenshot. How will the HTTP request http://xenapp.training.lab/url1" be redirected based on the screenshot?

The request will be sent to LB_vserver1.

The request will be dropped at the CS vServer.

The request will be sent to lb_vsrv_www.

The request will be sent to LB_vserver2.

A Citrix Administrator needs to confirm that all the client certificates presented to the authentication vServer are valid until year 2020. Which expression can the administrator use to meet this requirement?

CLIENT.SSL.CLIENT_CERT.VALID_NOT_AFTER.EQ(GMT2020)

CLIENT.SSL.CLIENT_CERT.DAYS_TO_EXPIRE.EQ(2020)

CLIENT.SSL.ORIGIN_SERVER_CERT.VALID_NOT_AFTER.EQ(GMT2020)

CLIENT.SSL.CLIENT_CERT.VALID_NOT_BEFORE.EQ(GMT2020)

Scenario: A Citrix Administrator has configured an HTTP load-balancing virtual server with Least Response Time as the load-balancing algorithm. The administrator notices that requests to the virtual server appear to be using the Round Robin load-balancing algorithm. What could be causing the virtual serer to use the Round Robin load-balancing algorithm?

The virtual server is in startup round robin mode.

The Citrix ADC configuration has NOT been saved yet.

The virtual server is in startup round robin mode.

The services that are bounbd to the HTTP virtual server are using the PING monitor.

Least Response Time CANNOT be used as a load-balancing algorithm on an HTTP virtual server.

Scenario: A Citrix Administrator has configured the Citrix ADC as a DNS Proxy Server. The administrator executed the commands in the screenshot on the Citrix ADC using the command-line interface.Click on the 'Exhibit' button to view the screenshot of the command-line interface. What will be the effect of this configuration?

Create a DNS Response with TC bit set and rcode as NOERROR

Create a DNS Request with TC bit set and rcode as NOERROR

Create a DNS Response with TC bit set and rcode as NOERROR

Set TC bit and rcode as NOERROR in the DNS Request from Client

Set TC bit and rcode as NOERROR in the DNS Response from DNS server

Scenario: A Citrix Administrator is managing a Citrix ADC SDX running eight Citrix ADC instances. The administrator first needs to upgrade the firmware on the instances. However; the administrator is concerned that it needs to be done all at once.What upgrading flexibility does SDX provide in this scenario?

The Citrix ADC instances have to be upgraded at the same time.

It is NOT possible to upgrade the Citrix ADC instances to different firmware versions.

The Citrix ADC instance can be upgraded at the SDX management level, allowing all instances to be upgraded at once.

The Citrix ADC instance can be upgraded on an individual basis, allowing all instances to run different firmware versions.

A Citrix Administrator configured the Responder policy to redirect the request for root page to the home page. However, after executing the command, the webpage access entered a loop, as shown in the second screenshot. Click on the 'Exhibit' buttons to view the screenshots. How will the administrator rectify this issue?

Change Responder Policy expression to http.REQ.URL.EQ("/")

Change Responder action expression to "/"

Change Responder Policy expression to http.REQ.URL.Contains("/")

Change Responder Action expression to http.RE Q.URL

Change Responder Policy expression to http.REQ.URL.EQ("/")

A Citrix Administrator needs to match the host name 'www.example.com' in all HTTP requests.Which expression, when used, meets this requirement?

HTTP.REQ.HOSTNAME.EQ("www.example.com")

HTTP.REQ.HOSTNAME("example.com")

HTTP.RES.HOSTNAME.CONTAINS("www.example.com")

HTTP.RES.HOSTNAME.EQ("www.example.com")

Scenario: A Citrix Administrator has executed the following command:set httpcallout httpcallout1 -cacheForSecs 120What will be the effect of this command?

The cache duration of the HTTP callout response is set to 120 seconds.

The cache duration of the HTTP request is set to 120 seconds.

The cache duration of the HTTP callout request is set to 120 seconds.

The cache duration of the HTTP response is set to 120 seconds.

The cache duration of the HTTP callout response is set to 120 seconds.

A Citrix Administrator needs to block all the DNS requests from subnet 10.107.149.0/24.Which expression can the administrator use to match the required traffic?

CLIENT.IP.SRC.IN_SUBNET(10.107.149.0/24)&& (client UDP.DSTPORT.EQ(53) || client. TCP.DSTPORT.EQ(53))

CLIENT.IP.SRC.IN_SUBNET(10.107.149.0/24)&& client UDP.DSTPORT.EQ(53) || client. TCP.DSTPORT.EQ(53)

CLIENT.IP.SRC.IN_SUBNET(10.107.149.0/24)&& (client UDP.DSTPORT.EQ(53) || client. TCP.DSTPORT.EQ(53))

CLIENT.IP.SRC(10.107.149.0) && (client.UDP.DSTPORT.EQ(53) || client.TCP.DSTPORT.EQ(53))

CLIENT.IP.SRC(10.107.149.0) && client.UDP.DSTPORT.EQ(53) || client.TCP.DSTPORT.EQ(53)

Scenario: A Citrix Administrator is concerned about the amount of health checks the Citrix ADC is sending to the backend resources. The administrator would like to find a way to remove health checks from specific bound services.How can the administrator accomplish this?

Use reverse condition monitoring.

Use Service Groups to minimize health checks.

Scenario: Client connections to certain virtual servers are abnormally high. A Citrix Administrator needs to be alerted whenever the connections pass a certain thershold.How can the administrator use Citrix Application Delivery Management to accomplish this requirement?

Configure Network Reporting on the Citrix Application Delivery Management by setting the threshold and email address.

Configure TCP Insight on the Citrix Application Delivery Management.

Configure specific alerts for virtual servers using Citrix Application Delivery Management.

Configure SMTP Reporting on the Citrix Application Delivery Management by adding the threshold and email address.

Configure Network Reporting on the Citrix Application Delivery Management by setting the threshold and email address.

Scenario: A Citrix Administrator suspects an attack on a load balancing virtual server. The administrator needs to restrict access to the load balancing virtual server (192.168.100.25) for 10 minutes.Which Access Control List (ACL) will help to accomplish this requirement?

add ns acl rule1 DENY -destIP 192.168.100.25 -TTL 600

add simpleacl rule1 DENY -srcIP 192.168.100.25-TTL 600

add ns acl rule1 DENY -destIP 192.168.100.25 -TTL 600

add simpleacl rule1 DENY -srcIP 192.168.100.25 -TTL 600000

add ns acl rule1 DENY -destIP 192.168.100.25 -TTL 600000

Which command should a Citrix Administrator use to configure a Content Switching virtual server for implementing the Citrix Secure Web Gateway in the transparent proxy mode?

add cs vserver swgVS PROXY 192.168.10.1 -Authn401 on -authnVsName transparent-auth-vs

add cs vserver swgVS PROXY * 21 -Authn401 on -authnVsName transparent-auth-vs

add cs vserver swgVS PROXY** -Authn401 on -authnVsName explicit-auth-vs

add cs vserver swgVS PROXY 192.168.10.1 -Authn401 on -authnVsName transparent-auth-vs

add cs vserver swgVS PROXY 192.168.10.1 80 -Authn401 on -authnVsName transparent-auth-vs

Scenario: A Citrix Administrator is performing a disaster recovery test and decided to fail over the Citrix ADC high availability (HA) pair appliances. The administrator noticed that the failover is NOT working as expected in item text, and the Secondary Citrix ADC is NOT taking over as Primary. The administrator suspects that networking issues may be causing the failure.What could be the cause of this issue with the Citrix ADCs?

HA monitoring is enabled on a disabled inteface of the Primary Node.

HA hertbeats are only seen on some enabled interfaces of the Secondary Node.

HA monitoring is enabled on an interface of the Secondary Node that shows as ENABLED, DOWN.

The Independent network configuration (INC) mode is enabled on the Primary Node.

HA monitoring is enabled on a disabled inteface of the Primary Node.

Which two actions must be true for a client to connect to an SSL offload virtual server without any SSL errors? (Choose two.)

The Root Certificate is installed on the client's device.

The Server Certificate is bound to the load-balancing virtual server.

The Root Certificate is installed on the client's device.

The Server Certificate is from a private certificate authority (CA).

The Server Certificate is bound to the load-balancing virtual server.

The Root Certificate is installed on the Citrix ADC.

A Citrix Administrator complains that between the two rewrite policies bound to the vserver, only one policy, whichever has lower priority, works. The other policy is never used.Click the 'Exhibit' button to view the screenshot of the relevant policy binding. What is the cause of the issue?

The Policy expression of the no_chunk_pol is 'true' and 'NOT HTTP.REQ.IS_VALID'.

The Invoke label is NOT configured.

GotoExpression value for Policy RP_remove_srv_header is configured as 'END'.

The Policy expression of the no_chunk_pol is 'true' and 'NOT HTTP.REQ.IS_VALID'.

The Priority of the no_chunk_pol is a higher numeric value than 100.

Which two options would provide an end-to-end encryption of data, while allowing the Citrix ADC to optimize the responses? (Choose two.)

SSL protocol for the virtual server

SSL Bridge protocol for the services

SSL Bridge protocol for the virtual server

HTTP protocol for the virtual server

SSL protocol for the virtual server

A Citrix Administrator has configured the Citrix ADC as a DNS Proxy Server. The administrator executed the following commands on the Citrix ADC using command-line interface: What will be the effect of executing the above commands?

Unset the AA bit of DNS Request

Unset the AA bit of DNS Response

Citrix 1Y0-204 Practice Test 3 - Free Online Exam Questions 81-120

A Citrix Administrator needs to block access to multiple URLs for security reasons.

Which configuration should the administrator use to accomplish this requirement?

Become a Premium Member for full access

Unlock Premium Member

Citrix 1Y0-204 Practice Test 3

Question

Drag and Drop

Hot Area

Citrix 1Y0-204 Practice Tests

Practice Tests