Scenario: A Citrix Administrator needs to configure a Responder policy, so that the string “/mytraining” is added to every URL path received.The administrator should use these commands to accomplish this:>add responder action Redirect_Act redirect “HTTP.REQ.URL.PATH_AND_QUERY+\”mytraining\”” –responseStatusCode 302>add responder policy Redirect_Pol___________Redirect_Act>bind lb vServer lb_vsrv_www –policyName Redirect_Pol –priority 100 –gotoPriorityExpression END – type_______(Choose the correct option to complete the set of commands.)

“!(HTTP.REQ.URL.ENDSWITH(\”mytraining\”))”RESPONSE

“(HTTP.REQ.URL.STARTSWITH(\”mytraining\”))”REQUEST

“(HTTP.REQ.URL.STARTSWITH(\”mytraining\”))”RESPONSE

“!(HTTP.REQ.URL.ENDSWITH(\”mytraining\”))”REQUEST

“!(HTTP.REQ.URL.ENDSWITH(\”mytraining\”))”RESPONSE

Which two steps are necessary to configure global server load balancing (GSLB) service selection using content switching (CS)? (Choose two.)

Bind the domain to the CS vServer instead of the GSLB vServer.

Configure a CS vServer of target type GSLB.

Bind the domain to the CS vServer instead of the GSLB vServer.

Configure CS policies that designate a load-balancing vServer as the target vServer.

Configure a CS vServer of target type GSLB.

Bind the GSLB domain to the GSLB vServer.

A Citrix Administrator needs to configure a Citrix ADC high availability (HA) pair with each Citrix ADC in a different subnet.What does the administrator need to do for HA to work in different subnets?

Turn on Independent Network Configuration (INC) mode.

Turn on HA monitoring on all interfaces

Turn on Independent Network Configuration (INC) mode.

Scenario: A Citrix Administrator configured Citrix ADC load balancing to send requests to one of three identical backend servers. Each server handles multiple protocols, and load balancing is set up in round-robin mode.The current load-balancing setup on the Citrix ADC is:One load-balancing vServer with one externally accessible VIPOne service created for each protocol typeOne server entity for each backend resourceDuring business hours, the administrator wants to make changes to one backend server without affecting the other servers.What is the most efficient way for the administrator to ensure that all traffic is routed away from the server without impeding responses from other resources?

Disable the backend server entity targeted for change.

Disable the backend service entity targeted for change.

Disable the backend server entity targeted for change.

Disable the load-balancing vServer.

Unbind the correct server entity from the load-balancing vServer.

A Citrix Administrator configured an external syslog server but is NOT seeing detailed TCP information?What could be causing this?

Log facility is NOT configured.

User-defined audit log is NOT configured.

A Citrix Administrator is creating a new SSL vServer and notices the ns_default_ssl_profile frontend SSL profile is automatically bound to the SSL vServer.Which two actions can the administrator perform to change or remove the ns_default_ssl_profile_frontend SSL profile once it is enabled? (Choose two.)

Unbind the default SSL profile and bind the newly created SSL profile.

Globally unbind the ns_default_ssl_profile_frontend SSL.

Unbind the default SSL profile and bind the newly created SSL profile.

Unbind the ns_default_ssl_profile_frontend SSL profile from the SSL vServer without binding a replacement SSL profile.

Globally disable the ns_default_ssl_profile_frontend SSL profile.

What is the effect of the “set cs vServer-CS-1 –redirectURL http://www.newdomain.com/mysite/”command?

If the status of vServer-CS-1 is DOWN, then users will be redirected to http://www.newdomain.com/mysite/.

If the vServer-CS-1 encounters a high connection rate, then users will be redirected to http://www.newdomain.com/mysite/.

If the status of vServer-CS-1 is DOWN, then users will be redirected to http://www.newdomain.com/mysite/.

All the requests to vServer-CS-1 will be redirected to http://www.newdomain.com/mysite/.

All the requests without URL path/mysite/ will be redirected to http://www.newdomain.com/mysite/.

Scenario: A Citrix Administrator downloaded and deployed Citrix Application Delivery Management (ADM) in an environment consisting of six Citrix ADCs and 100 virtual servers. When viewing the Citrix ADM console, the administrator sees only 30 virtual servers.Why is the administrator unable to see all 100 virtual servers?

Citrix ADM is using a free license.

The nsroot passwords are NOT the same across all the Citrix ADCs.

Citrix ADM is using a free license.

Additional Citrix ADM systems need to be deployed to see all virtual servers.

The Citrix ADC and Citrix ADM firmware versions are NOT the same.

Scenario: A Junior Citrix Administrator needs to create a content switching vServer on a Citrix ADC high availability (HA) pair. The NSIP addresses are 192.168.20.10 and 192.168.20.11. The junior administrator connects to NSIP address 192.168.20.10 and saves the changes.The following day, a Senior Citrix Administrator tests the new content switching vServer, but it is NOT working. The senior administrator connects to the HA pair and discovers that everything the junior administrator configured is NOT visible.Why has the Citrix ADC lost the newly added configurations?

The junior administrator connected to the NSIP of the secondary Citrix ADC in the HA pair.

The junior administrator made the changes and did NOT force a failover to save the configuration.

The junior administrator connected to the NSIP of the secondary Citrix ADC in the HA pair.

Both Citrix ADCs in the HA pair restarted overnight.

The Citrix ADC appliances have different firmware versions.

Scenario: A Citrix Administrator configured a load-balancing vServer. The URL for this vServer is vpn.citrix.com. The backend server has the host name configured as server1.citrix.com.The administrator needs to implement the policy to change the host name from vpn.citrix.com to server1.citrix.com, and vice versa.Which does the administrator need to configure to meet this requirement?

set transform action “host change” –priority 10 –reqUrlFrom “https://vpn.citrix.com/*” –reqUrlInto “https://server1.citrix.com/*” –resUrlFrom “https://server1.citrix.com/*” –resUrlInto“https://vpn.citrix.com/*”

set transform action “host change” –priority 10 –reqUrlFrom “https://server1.citrix.com/*” –reqUrlInto “https://vpn.citrix.com/*” –resUrlFrom “https://server1.citrix.com/*” –resUrlInto “https://vpn.citrix.com/*”

set transform action “host change” –priority 10 –reqUrlFrom “https://server1.citrix.com/*” –reqUrlInto “https://vpn.citrix.com/*” –resUrlFrom “https://vpn.citrix.com/*” –resUrlInto “https://server1.citrix.com/*”

set transform action “host change” –priority 10 –reqUrlFrom “https://vpn.citrix.com/*” –reqUrlInto “https://server1.citrix.com/*” –resUrlFrom “https://vpn.citrix.com/*” –resUrlInto“https://server1.citrix.com/*”

Which step can a Citrix Administrator take to use default compression policies?

Enable compression on the associated bound services.

Select the compression algorithm (gzip/deflate/identity).

Disable the Citrix ADC compression feature at a global level.

Enable compression on the associated bound services.

Bind the default compression policies to the vServer.

Scenario:POLICY 1: add rewrite action ACT_1 corrupt_http_header Accept-Encoding add rewrite policy POL_1 HTTPS.REQ.IS_VALID ACT_1 POLICY 2: add rewrite action ACT_2 insert_http_header Accept-Encoding “\”identity\”” add rewrite policy POL_2 “HTTP.REQ.IS_VALID “ ACT_2 How can a Citrix Administrator successfully bind the above rewrite policies to the load-balancing vServer lb_vsrv so that POL_2 is evaluated after POL_2 is evaluated?

bind lb vServer lb_vsrv –policyName POL_1 –priority 90 –gotoPriorityExpression NEXT –type REQUEST bind lb vServer lb_vsrv –policyName POL_2 –priority 100 –gotoPriorityExpression END –type REQUEST

bind lb vServer lb_vsrv –policyName POL_1 –priority 110 –gotoPriorityExpression NEXT –type REQUEST bind lb vServer lb_vsrv –policyName POL_2 –priority 100 –gotoPriorityExpression END –type REQUEST

bind lb vServer lb_vsrv –policyName POL_1 –priority 90 –gotoPriorityExpression NEXT –type REQUEST bind lb vServer lb_vsrv –policyName POL_2 –priority 100 –gotoPriorityExpression END –type REQUEST

bind lb vServer lb_vsrv –policyName POL_1 –priority 90 –gotoPriorityExpression END –type REQUEST bind lb vServer lb_vsrv –policyName POL_2 –priority 80 –gotoPriorityExpression NEXT –type REQUEST

bind lb vServer lb_vsrv –policyName POL_1 –priority 90 –type REQUEST bind lb vServer lb_vsrv –policyName POL_2 –priority 100 –type REQUEST

Scenario: A Citrix Administrator made changes to a Citrix ADC, deleting parts of the configuration and saving some new ones. The changes caused an outage that needs to be resolved as quickly as possible.There is no Citrix ADC backup.What does the administrator need to do to recover the configuration quickly?

Restore from the revision history.

Run saved versus running configuration.

Run highly availability (HA) file synchronization.

Scenario: A Citrix Administrator executed the following commands on the Citrix ADC:> add policy dataset Admin_group ipv4> bind policy dataset Admin_group 192.168.149.10 –index 11> bind policy dataset Admin_group 192.168.149.39 –index 12> bind policy Admin_group 192.168.149.49 –index 13> add responder policy POL_1“!(CLIENT.IP.SRC.TYPECAST_TEXT_T.CONTAINS_ANY(\”Admin_group\”))”RESET> bind lb vServer lb_vsrv_www –policyName POL_1 –priority 100 –gotoPriorityExpression END –type REQUEST What will be the effect of these commands?

Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be allowed to connect to vServer lb_vsrv_www.

Only users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked when attempting to connect to vServer lb_vsrv_www.

Only users with a source IP address of 192.168.149.10 or 192.168.149.39 will be allowed to connect to vServer lb_vsrv_www.

All traffic from users with a source IP address of 192.168.149.10, 192.168.149.39, or 192.168.149.49 will be blocked through the Citrix ADC.

Scenario: Client connections to certain vServers are abnormally high. A Citrix Administrator needs to be alerted whenever the connections pass a certain threshold.How can the administrator use Citrix Application Delivery Management (ADM) to accomplish this?

Configure network reporting on the Citrix ADM by setting the threshold and email address.

Configure SMTP reporting on the Citrix ADM by adding the threshold and email address.

Configure TCP Insight on the Citrix ADM.

Configure specific alerts for vServers using Citrix ADM.

Scenario: While attempting to access web server that is load balanced by a Citrix ADC using HTTPS, auser receives the message below.SSL/TLS error: You have not chosen to trust “Certificate Authority” the issuer of the server’s security certificate.What can a Citrix Administrator do to prevent users from viewing this message?

Ensure that the server certificate is linked to its respective intermediate and root certificates.

Ensure that users have the certificate’s private key.

Ensure that users have the certificate’s public key.

Ensure that the server certificate is linked to its respective intermediate and root certificates.

Ensure that users have the server certificate installed.

Scenario: A Citrix ADC MPX is using one of four available 10G ports. A Citrix Administrator discovers a traffic bottleneck at the Citrix ADC.What can the administrator do to increase bandwidth on the Citrix ADC?

Add another 10G Citrix ADC port to the switch, and configure Link Aggregation Control Protocol (LACP).

Purchase another Citrix ADC MPX appliance.

Plug another 10G Citrix ADC port into the router.

Add two more 10G Citrix ADC ports to the network and configure VLAN.

Add another 10G Citrix ADC port to the switch, and configure Link Aggregation Control Protocol (LACP).

What is the first thing a Citrix Administrator should develop when creating a server certificate for Citrix ADC to secure traffic?

A certificate revocation list (CRL)

A certificate signing request (CSR)

A Citrix Administrator needs to match the host name ‘www.example.com’ in all HTTP requests.Which expression, when used, meets this requirement?

HTTP.REQ.HOSTNAME.EQ(“www.example.com”)

HTTP.RES.HOSTNAME.EQ(“www.example.com”)

HTTP.REQ.HOSTNAME(“example.com”)

HTTP.RES.HOSTNAME.CONTAINS(“www.example.com”)

Scenario: A Citrix Administrator gives permissions to team members to access their own admin partition. This will allow them to add resources for different departments and manage them without making changes to the default Citrix ADC partition and configuration.One team member typing to use the command line interface (CLI) to troubleshoot an authentication issue could NOT use aaad.debug. However, the team member has full permissions on the admin partition.What can be the cause of this issue?

The team member does NOT have shell access by design.

The team member is NOT using the CLI correctly.

The team member needs to troubleshoot the issue from the GUI.

The team member does NOT have permission to use the CLI.

The team member does NOT have shell access by design.

A Citrix Administrator receives user complaints about latency while accessing an application that is load balanced on the Citrix ADC.Which tool can the administrator use to gather information regarding response time, client network latency, and server-side processing time?

Citrix Application Delivery Management (ADM)

Scenario: While using the GUI, a Citrix ADC MPX appliance becomes unresponsive. A Citrix Administrator needs to restart the appliance and force a core dump for analysis.What can the administrator do to accomplish this?

Use the NMI button on the back of the appliance.

Turn off the appliance using the power button.

Use the reset button on the front of the appliance.

Use the NMI button on the back of the appliance.

Connect to a USB port to issue a restart command.

Scenario: A Citrix Administrator executed the following command in a global server load balancing (GSLB) environment: set gslb site SiteB –triggerMonitor MEPDOWN What will be the effect of this command on the default service monitoring behavior on a remote site?

The service monitor is invoked only when Metric Exchange Protocol (MEP) has marked the service as DOWN.

The service monitor is invoked only when Metric Exchange Protocol (MEP) connectivity has been lost between Site A and Site B.

The service monitor will take precedence over Metric Exchange Protocol (MEP).

The state of the GSLB service will always be controlled by Metric Exchange Protocol (MEP).

Which Citrix ADC monitor can a Citrix Administrator use to check the authentication service of the Active Directory (AD) domain controller?

An LDAP monitor with the LDAP Script Name, Configured Base DN, Bind DN, Filter, Attribute and Password parameters in the basic parameters.

A ping monitor with the IP address of the AD domain controller in the special parameters

A MYSQL-ECV monitor with the Base DN, Bind DN, Filter, Attribute, and Password parameters configured in the basic parameters

A TCP monitor with the LDAP Base DN configured in the basic parameters.

A Citrix Administrator needs to configure a rate-limiting policy setting DNS requests to a threshold of 1,000 per second.Which command does the administrator need to run to correctly configure this policy?

SYS.CHECK.LIMIT(<limit_identifier>)

HTTP.REQ.LIMIT(<limit_identifier>)

SYS.CHECK.LIMIT(<limit_identifier>)

SYS.CHECK.LIMIT(<limit_identifier>) || CONNECTION.IP.LIMIT(<limit_identifier>)

SYS.CHECK.LIMIT(<limit_identifier>) || HTTP.REQ.LIMIT(<limit_identifier>)

Scenario: A company has three departments with proprietary applications that need to be load balanced on a Citrix ADC. The three department managers would like to use the same IP address to access their individual applications. This would mean configuring three load-balanced vServers, all using the same IP address.What can the Citrix Administrator configure for this scenario?

Three different admin partitions that allow use of the same IP address for each load-balanced vServer on a Citrix ADC

Three SNIPs with the same IP address on a Citrix ADC

Three different Citrix ADCs that use the same IP address

Three different admin partitions that allow use of the same IP address for each load-balanced vServer on a Citrix ADC

Three different load-balanced vServers with three different IP addresses on a Citrix ADC

Citrix 1Y0-241 Practice Test 1 - Free Online Exam Questions 1-40

Question 1 / 40

How can a Citrix Administrator configure a rewrite policy to change the version of HTTP from 1.1 to1.0 in every request?

>add rewrite action RW_ACT replace http.res.version “\”HTTPS/1.0\””> add rewrite policy RW_POL true RW_ACT

>add rewrite action RW_ACT replace http.req.version “\”HTTPS/1.1\””> add rewrite policy RW_POL true RW_ACT

>add rewrite action RW_ACT replace http.res.version “\”HTTPS/1.1\””> add rewrite policy RW_POL true RW_ACT

>add rewrite action RW_ACT replace http.req.version “\”HTTPS/1.0\””> add rewrite policy RW_POL true RW_ACT

Comment (0)

Citrix 1Y0-241 Practice Test 1

Question

Citrix 1Y0-241 Practice Tests

Practice Tests