Scenario: A Citrix Engineer is maintaining a Citrix Virtual Apps and Desktops environment with both internal and external users and has deployed Workspace Environment Management (WEM) within the infrastructure to provide resources to users within their sessions. The engineer has recently added a network printer to WEM under the Actions node, using the New Network Printer dialog tab, and wants to limit this printer usage to internal Citrix users, as shown below:Internal users utilize Windows 10 onlyExternal users Windows 10 and Windows 2016 machinesThe server network IP address range is from 192.168.10.1 to 192.168.10.200Citrix LAN users are all within IP address scope of 192.168.20.50 to 192.168.20.90The external users are on a public domainThe Everyone group has already been added to the Assignments node within the WEM consoleThe engineer needs to create a Condition based on ______________ from within the Filters node and ______________ the Matching Result field within WEM to complete this task.

Client IP Address Match; add the IP address range 192.168.20.50 to 192.168.20.90 to

OS Platform type; select Windows 10 from

Client IP Address Match; add the IP address range 192.168.20.50 to 192.168.20.90 to

IP Address Match; add the IP address range 192.168.10.1 to 192.168.10.200 to

Client OS; select Windows 10 from

Scenario: A Citrix Engineer recently changed the XML port in the Citrix Virtual Apps and Desktops site. After the change, the engineer observed that there is an XML communication port mismatch. The engineer immediately identified that the port was only changed on the Delivery Controller and no change was performed on the StoreFront server.What are the two ways the engineer can change the port on the StoreFront server to match the changes made on the Delivery Controller? (Choose two.)

Make changes in the web.config file on the StoreFront server

Run a PowerShell command on the StoreFront server

Run a PowerShell command on the Delivery Controller to change the port on the StoreFront server

Make changes in the web.config file on the StoreFront server

Run a PowerShell command on the StoreFront server

Make changes in the StoreFront settings using the StoreFront console

Scenario: A Citrix Engineer is working on a Citrix Virtual Apps and Desktops deployment.The current setup has the following characteristics:Three data centers (A, B, and C), each with a large user base.Network latency between these datacenters is more than 300 ms RTT because they are located at geographically far distances. Which design should the engineer choose to ensure optimum performance?

A Multi-zone site with three zones (one primary and two secondary), with a site database in the Primary zone

A Multi-zone site with three zones (one primary and two secondary), with a site database in each of the three zones

A Multi-zone site with three zones (one primary and two secondary), with a site database in the Primary zone

One site for each data center with a common site database deployed at the largest site

One site for each data center with a separate site database for each site

A Citrix Engineer is in the process of updating application layers.Which three layer integrity messages must the engineer address before finalizing the application layer? (Choose three.)

A restart is pending to update drivers on the boot disk

A post-installation restart is pending

An MSI install operation is in progress

User profile updates are in progress

A restart is pending to update drivers on the boot disk

Additional users are logged on to the machine

A post-installation restart is pending

An MSI install operation is in progress

Which two actions should a Citrix Engineer take when upgrading a Workspace Environment Management (WEM) environment? (Choose two.)

Ensure that a valid database backup is created before launching the upgrade process

Run the database upgrade utility under an identity that has sysadmin permissions

Ensure that a valid database backup is created before launching the upgrade process

Leave the WEM database in the Always On availability group

Run the database upgrade utility under an identity that has sysadmin permissions

Specify the SQL Server SA credentials during the upgrade wizard

Run the WEM database management utility on all the WEM brokers

How can a Citrix Engineer restrict end user access to an ICA file?

Disable unneeded HDX channels and redirections

Place the StoreFront URL in the Intranet zone

Restrict Control Panel access and functionality

▪ Scenario: A Citrix Engineer manages a Citrix Virtual Apps and Desktops on-premises environment, which includes the following Citrix infrastructure servers running in the datacenter: Two Citrix Gateway servers▪ Two StoreFront servers▪ Two Delivery Controllers▪ One Citrix Director server▪ One Citrix License Server▪ Two SQL serversThe engineer needs to move the Control Layer to Citrix Cloud as part of the business goals for this year. Which statement is true regarding Citrix Gateway for this environment?

Citrix Gateway must be moved to Citrix Cloud

The Citrix Cloud Connector acts as a Secure Ticket Authority (STA) server on the Citrix Gateway

Citrix Gateway must be moved to Citrix Cloud

Citrix StoreFront must be moved to Citrix Cloud

The Delivery Controllers act as Secure Ticket Authority (STA) servers on the Citrix Gateway

A Citrix Engineer is taking over the management of an environment in which non-persistent machines were deployed with Workspace Environment Management (WEM) Agent.Which two statements are true for this environment? (Choose two.)

The Agent would need to contact the Infrastructure Service after restart to gather cache data again

The cache is lost at each restart without a persistent disk

The Agent would need to contact the Infrastructure Service after restart to gather cache data again

The cache is lost at each restart without a persistent disk

The environment is NOT supported because the usage of a persistent disk is mandatory when using WEM

The WEM Agent applies real time updates only when the persistent disk is used

A Citrix Engineer is looking for ways to secure the Virtual Delivery Agent (VDA) in the Citrix Virtual Apps and Desktops environment. Which three steps should the engineer follow to secure the VDA? (Choose three.)

Add the certificate on Citrix Gateway

Add the certificate on the StoreFront server

Add the certificate on Citrix Gateway

Enable TLS on the Delivery Controllers

Add the certificate on the StoreFront server

Which two considerations are accurate regarding the Process Management feature of Workspace Environment Management (WEM)? (Choose two.)

When WhiteList is enabled, any process NOT added to the WhiteList will be automatically blacklisted

When adding application processes to either the BlackList or the WhiteList, they need to be designated by the full executable name

When WhiteList is enabled, any process NOT added to the BlackList will be automatically whitelisted

When using exclusions for either Local Administrators or Specified Groups, it is available for Process Blacklist, but NOT for Process WhiteList

When WhiteList is enabled, any process NOT added to the WhiteList will be automatically blacklisted

When adding application processes to either the BlackList or the WhiteList, they need to be designated by the full executable name

Scenario: A Citrix Engineer recently took over a multi-zone environment with one Primary zone in New York and two Secondary zones in San Francisco and Orlando respectively. The New York zone has two Delivery Controllers, San Francisco has one Delivery Controller, and the Orlando zone has two Delivery Controllers. The engineer received alerts that the Orlando zone Delivery Controllers were down.Where will the Orlando zone Virtual Delivery Agent (VDA) machines register?

San Francisco Delivery Controllers

New York and Orlando Delivery Controllers

New York and San Francisco Delivery Controller

Which three components will be available during a SQL Server outage? (Choose three.)

Hosted Windows and Browser Applications

Remote PC Desktop (for Automatic enrollment)

What is the first step that the Enterprise Layer Manager (ELM) server takes when creating application layers?

Once the process to create a layer is initiated from the Layering Management Console, the ELM server then uses a connector to build a packaging machine

Once the engineer manually creates the packaging machine, the ELM server initiates a connection to the packaging machine

Once a packaging machine is created, the next step is to finalize the targeted installation, using the application layering finalization software

Once the process to create a layer is initiated from the Layering Management Console, the ELM server then uses a connector to build a packaging machine

Once the packaging machine is finalized, any application installation or configuration should be performed and completed

Scenario: A Citrix Engineer has two datacenters: Site A, the main datacenter and Site B, the secondary datacenter. Both datacenters have Citrix App Layering 4.3 installed.How can the engineer ensure that all layers are available in Site A and Site B?

Reconfigure ELM Site A and ELM Site B to use DFSR for all layers

Configure layer synchronization directly between ELM Site A and ELM Site B using the Citrix App Layering console

Export all the Standard Layers directly from ELM Site A to ELM Site B and export all other layers to a Windows Share, then import them to Site B

Export all layers from ELM Site A to a Windows Share, then import them to Site B

How can a Citrix Engineer setup synchronization of subscription data between server groups using a replication schedule?

Make changes in the subscription file on the StoreFront server

Execute a Windows PowerShell command on the StoreFront server

Make changes in the subscription file on the StoreFront server

Make changes in the web.config file on the StoreFront server

Scenario: A Citrix Engineer configured two Sites: Production and Disaster Recovery. During an outage in the Production Site, the Virtual Delivery Agent (VDA) registration in the Disaster Recovery Site has failed.What are two possible causes for this issue? (Choose two.)

TCP port 443 is NOT open between the VDA and Delivery Controllers on the Disaster Recovery Site

The Delivery Controllers in the Disaster Recovery Site were NOT able to contact the Delivery Controllers in the Production Site to complete the registration process

TCP port 443 is NOT open between the VDA and Delivery Controllers on the Disaster Recovery Site

The VDA is configured with a GPO to register with the Delivery Controllers from the Production Site

The Delivery Controllers were set manually during VDA configuration and point to the Production Site

The Delivery Controllers in the Disaster Recovery Site were NOT able to contact the Delivery Controllers in the Production Site to complete the registration process

Scenario: A Citrix Engineer is configuring a User Layer for Windows 10 VDI users. The engineer needs to store only users' Microsoft Outlook data and settings in the User Layer.Which User Layer requires the least amount of administrative effort to meet this requirement?

Citrix Profile Management with Full

In which location is the resulting .VHD file stored by the Enterprise Layer Manager (ELM), when creating layers or layered images with Citrix App Layering?

On the Repository located on the local storage of the Enterprise Layer Manager (ELM)

On a Common Internet File System (CIFS) share location on the local domain file share server

On the Repository located on the local storage of the Enterprise Layer Manager (ELM)

On the Server Message Block (SMB) file share configured from the Citrix App Layering management console

On local storage attached to the hypervisor platform being used to create the images

Scenario: A Citrix Engineer is managing a large Citrix Virtual Apps and Desktops environment. Recently, the users are complaining about slow sessions on random days. The engineer wants to use a Citrix tool in order to have a baseline comparison of the users' performance on a daily basis. Which tool can the engineer use to accomplish this?

Citrix Diagnostic Facility (CDF) Control

Which statement is valid regarding back-up of StoreFront Configuration?

Configuration exports can be imported on other machines with StoreFront installed.

Only a partial configuration of StoreFront can be exported.

Configuration on a StoreFront server will NOT be overwritten completely by the imported settings.

Configuration exports can be imported on other machines with StoreFront installed.

StoreFront configuration exports can include only single server deployments and NOT server group configurations.

Scenario: A Citrix Engineer is maintaining a Citrix Virtual Apps and Desktops environment. The engineer has deployed Workspace Environment Management (WEM) within the infrastructure. The engineer has recently noticed that the two most commonly used applications are consuming excessive disk contention and causing bottlenecks on the servers.Which WEM System Optimization does the engineer need to use to address this issue?

Session-Based Computing/Hosted Virtual Desktop (SBC/HVD) Tuning

What are two valid options to manage antivirus definition updates in a Citrix App Layering deployment? (Choose two.)

Disable auto-updates and redeploy the layer for each update on a schedule approved by the security team.

Enable auto-updates and store updates in the user's User Layer.

Enable auto-updates and store updates in the Elastic Layer assigned to each user.

Disable auto-updates and redeploy the layer for each update on a schedule approved by the security team.

Enable auto-updates and store updates in the user's User Layer.

Disable auto-updates and clear the checkbox for "Reinstall the layer" when redeploying the layers.

Scenario: A Citrix Engineer has been hired to work on daily troubleshooting issues like session hang, Virtual Delivery Agent (VDA) registration issues, and non- responsive application issues. The engineer will also need recent trends to prepare health check reports. Which component/console should the engineer consider using?

Citrix Diagnostic Facility (CDF) Tracing

Scenario: A Citrix Engineer needs to configure passthrough for user authentication on the Workspace front. The engineer confirmed that Single Sign-on process is running on the user machine and all the other settings are in place on the machine.Which two steps should the engineer follow to make passthrough authentication work for the users? (Choose two.)

Configure Optimal Gateway Routing on the StoreFront server.

Configure Any Domain setting under Trusted domains in StoreFront.

Set the TrustManagedAnonymousXmlServiceRequests to true on the Delivery Controllers.

Configure Optimal Gateway Routing on the StoreFront server.

Set the TrustRequestsSentToTheXmlServicePort to true on the Delivery Controllers.

Which two statements are true regarding Publishing Platform Layer? (Choose two.)

It can be updated directly using the Citrix App Layering Management console.

Its purpose is to create a template that outputs to a virtual machine (VM) or a virtual disk.

It can be updated directly using the Citrix App Layering Management console.

Its purpose is to create a template that outputs to a virtual machine (VM) or a virtual disk.

It has limited use-case scenarios, such as making minor updates to an App Layer.

It is used every time changes are made, and a Platform Layer is being published.

Which statement is correct regarding Citrix App Layering templates and layered images?

Templates are NOT supported for use with physical machine imaging platforms.

Templates are NOT required when creating a VHD file for a Citrix Provisioning deployment.

To minimize management effort, use the same template to generate layered images for each hypervisor platform used.

Templates are NOT supported for use with physical machine imaging platforms.

After machines are provisioned from a layered image, delete that layered image to reduce storage consumption.

Which two statements are valid for Enterprise Layer Manager (ELM) storage? (Choose two.)

When installing the appliance, it comes equipped with an additional 300GB data disk.

This storage is used to store all OS, Platform and App Layers, and versions.

The appliance local storage size is fixed.

When installing the appliance, it comes equipped with an additional 300GB data disk.

This storage also stores Elastic Layers and their .JSON files.

This storage is used to store all OS, Platform and App Layers, and versions.

Which three statements are true about building multiple Elastic Layers? (Choose three.)

They are usually built to perform the majority of the application layer workload for users.

They greatly reduce the number of golden images required to be managed by Citrix App Layering.

They are primarily for applications with compatibility issues for specific users or groups.

There is no limit on how many Elastic Layers can be built as long as there is adequate SMB storage space and network bandwidth.

They are usually built to perform the majority of the application layer workload for users.

They appear identical to other application layers from a user perspective

They greatly reduce the number of golden images required to be managed by Citrix App Layering.

They are primarily for applications with compatibility issues for specific users or groups.

A Citrix Engineer configured two Workspace Environment Management (WEM) brokers that are load-balanced by Citrix ADC. How do the WEM brokers synchronize their information?

The WEM brokers alternatively synchronize with each other on a set schedule.

The secondary WEM broker periodically checks in with the primary WEM broker to get the latest settings.

The WEM brokers alternatively synchronize with each other on a set schedule.

The WEM brokers individually connect to the WEM database to keep their settings updated.

The WEM brokers share their Local Host Cache information

The main transformer setting within Workspace Environment Management (WEM) changes the WEM Agent machine so that it __________.

only runs white-listed applications

can be accessed remotely using HDX

intelligently adjusts RAM, CPU, and I/O resources

Scenario: A Citrix Engineer is managing a Citrix Virtual Apps and Desktops environment. The engineer has initiated a failover in the environment and wants to redirect the users to a different StoreFront server.How can the engineer accomplish this task?

Provide users with default ICA files.

Redirect the StoreFront URL to a different web page.

Copy the web.config file to the Disaster Recovery StoreFront server.

Provide users with custom ICA files.

After a Citrix Engineer configured FAS and SAML in a Citrix Virtual Apps and Desktops site, the Virtual Delivery Agent (VDA) machine requests the ________ from ________ in order to complete the VDA Windows logon process.

User's Certificate; Federated Authentication Service

Server's Certificate; Active Directory Certification Services

User's Certificate; Federated Authentication Service

Server's Certificate; Delivery Controller

User's Certificate; Active Directory Certification Services

Scenario: A Citrix Engineer is maintaining a Citrix Virtual Apps and Desktops environment. The engineer recently deployed Citrix App Layering for improved image management with Machine Creation Services (MCS). The infrastructure requires various 32-bit and 64-bit operating system platforms. Which three considerations does the engineer need to be aware of when creating various OS Layers for the company infrastructure? (Choose three.)

Application and Platform Layers are directly tied to the operating system layer on which they were created.

Before an OS version or layer can be deleted from the Citrix App Layering Management console, it must first NOT be in use by an existing template.

The engineer does NOT need to create a unique OS Layer for 32-bit and 64-bit versions of the same OS type.

Application and Platform Layers are directly tied to the operating system layer on which they were created.

The ELM Repository storage maintains a maximum limit of 10 OS Layers that can be built and maintained on it at any given time.

Before an OS version or layer can be deleted from the Citrix App Layering Management console, it must first NOT be in use by an existing template.

The engineer needs a unique layer for each OS build created.

The engineer does NOT need to create a unique OS Layer for 32-bit and 64-bit versions of the same OS type.

When preparing the OS Layer, the engineer should NOT include any hypervisor tools or utilities within the OS Layer.

Citrix 1Y0-312 Practice Test 3 - Free Online Exam Prep & Questions

Which two components should be managed by the customer as per Citrix recommendations, in order to move an existing on-premises Citrix Virtual Apps and Desktops environment to Citrix Cloud? (Choose two.)

Become a Premium Member for full access

Unlock Premium Member

Citrix 1Y0-312 Practice Test 3

Question

Citrix 1Y0-312 Practice Tests

Practice Tests