ExamGecko
Home Home / Citrix / 1Y0-403

Citrix 1Y0-403 Practice Test - Questions Answers, Page 4

Question list
Search
Search

List of questions

Search

Related questions











Scenario: Eight hundred users from a newly acquired company based in another continent will immediately require access to several Citrix applications being added to a zone within the Citrix Virtual Apps Site. Approximately 40 Citrix servers are being deployed in that zone. Management informs a Citrix Architect that the new company has an unused Citrix ADC MPX 24xxx series applies that should be used to address Citrix Gateway requirements. The design must support updating the Citrix ADC firmware without user interruption.

What should the architect do to ensure that the Citrix ADC MPX 24000-series appliance addresses these requirements?

A.
Install a Premium license on the appliance and deploy 2 extended access control lists (ACLs)
A.
Install a Premium license on the appliance and deploy 2 extended access control lists (ACLs)
Answers
B.
Deploy Citrix Gateway into 2 admin partitions.
B.
Deploy Citrix Gateway into 2 admin partitions.
Answers
C.
Convert to Citrix SDX, install an add-on pack license on the appliance, and deploy Citrix Gateway VPX instances in a cluster.
C.
Convert to Citrix SDX, install an add-on pack license on the appliance, and deploy Citrix Gateway VPX instances in a cluster.
Answers
D.
Install a Premium license on the appliance and deploy Citrix Gateway instances in a cluster.
D.
Install a Premium license on the appliance and deploy Citrix Gateway instances in a cluster.
Answers
Suggested answer: C

Scenario: A customer who installed all applications locally on managed laptops and desktops is willing to evaluate other application delivery methods as part of a new design created by a Citrix Architect. The environment will be standardized on Windows 10 and Windows Server 2016 for the Virtual Delivery Agent (VDA) machines.

As part of an application analysis performed earlier in the project, the information shown in the exhibit was collected regarding 1 of the required applications.

Click the Exhibit button to view the information.

Additionally, the customer has 3 objectives:

Minimize the amount of additional infrastructure components.

Utilize thin clients as endpoints in order to reduce costs.

Prohibit direct user access to the thin client operating system.

How should the architect install the application?

A.
Install it directly on a VDA machine image and access it through 2 virtual desktop session.
A.
Install it directly on a VDA machine image and access it through 2 virtual desktop session.
Answers
B.
Install it directly on endpoint devices, and include it in a virtual desktop session using the Local App Access feature.
B.
Install it directly on endpoint devices, and include it in a virtual desktop session using the Local App Access feature.
Answers
C.
Stream it to a VDA machine using Microsoft App-V and access it through a virtual desktop session.
C.
Stream it to a VDA machine using Microsoft App-V and access it through a virtual desktop session.
Answers
D.
Install it on an Application Layer using Citrix App Layering, then present it to assigned users as an Elastic Layer during a virtual desktop.
D.
Install it on an Application Layer using Citrix App Layering, then present it to assigned users as an Elastic Layer during a virtual desktop.
Answers
E.
Install it on an Application Layer using Citrix App Layering and include it in a layered image, and access it through a virtual desktop session.
E.
Install it on an Application Layer using Citrix App Layering and include it in a layered image, and access it through a virtual desktop session.
Answers
Suggested answer: D

Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. Currently, the environment is configured with 2 locations with identical Citrix Virtual Desktops Sites. Each Site has 2 Delivery Controllers, 2 StoreFront servers, and 1 Citrix ADC high-availability pair. The same applications have been published from both Sites for all users. Two zones (Zone A and Zone B) are configured in each Site with 1 Delivery Controller in each zone. The Microsoft Exchange server is only accessible from Virtual Delivery Agent (VDA) machines in Zone A in each Site.

Six access requirements have been identified:

Users should have a single URL when accessing resources from different Sites.

Users should always connect to the data center closest to their location.

Applications added to Favorites within the Citrix Workspace app should be retained when accessed from different Sites.

Launched applications and desktops should always connect through a local Citrix ADC.

No duplication of applications published from different Sites.

Microsoft Outlook should always launch in Zone A.

What should the architect recommend to ensure that Microsoft Outlook always launches from Zone A for every user?

A.
Configure zone preference based on user location.
A.
Configure zone preference based on user location.
Answers
B.
Configure Zone A as the application Home Zone for Microsoft Outlook.
B.
Configure Zone A as the application Home Zone for Microsoft Outlook.
Answers
C.
Move a Delivery Controller from Zone B to Zone A.
C.
Move a Delivery Controller from Zone B to Zone A.
Answers
D.
Designate Zone A as the Home Zone for all users.
D.
Designate Zone A as the Home Zone for all users.
Answers
Suggested answer: B


Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. The architect has identified the Resource Layer requirements shown in the exhibit.

Click the Exhibit button to view the requirements.

Which feature of Citrix Profile Management could help the architect address the Graphic Designers Group requirements?

A.
Active write back
A.
Active write back
Answers
B.
NTUser.dat backup
B.
NTUser.dat backup
Answers
C.
Profile streaming
C.
Profile streaming
Answers
D.
Profile caching
D.
Profile caching
Answers
Suggested answer: A

Explanation:

Reference: https://support.citrix.com/article/CTX224498

Scenario: A Citrix Architect is developing a Citrix Provisioning (PVS) design for a healthcare organization. The initial design places all PVS farm components in the primary data center of the organization. The customer asks if the vDisk can be streamed from PVS servers in the primary data center to target devices located in a secondary data center in another region, while still maintaining good performance. The data centers are connected with a 10 GB link with approximately 20 ms of latency.

The architect recommends against the organization pursuing this approach.

Which statement is a relevant reason for this recommendation?

A.
This configuration would introduce excessive latency in streaming traffic.
A.
This configuration would introduce excessive latency in streaming traffic.
Answers
B.
This configuration does NOT provide sufficient connectivity between PVS servers and the farm database.
B.
This configuration does NOT provide sufficient connectivity between PVS servers and the farm database.
Answers
C.
This configuration prevents the Subnet Affinity feature from being implemented.
C.
This configuration prevents the Subnet Affinity feature from being implemented.
Answers
D.
This configuration does NOT provide sufficient bandwidth for streaming traffic.
D.
This configuration does NOT provide sufficient bandwidth for streaming traffic.
Answers
Suggested answer: A

Explanation:

Reference: https://support.citrix.com/article/CTX220651

Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. As part of graphics-mode design considerations, the architect discovered that one User Group requires a graphics mode that provides both good performance and high image quality. Which graphics mode should the architect recommend be configured for this specific group?

A.
Visual quality = Build to Lossless
A.
Visual quality = Build to Lossless
Answers
B.
Visual quality = Always Lossless
B.
Visual quality = Always Lossless
Answers
C.
Optimize for 3D graphics workload = Disabled
C.
Optimize for 3D graphics workload = Disabled
Answers
D.
Optimize for 3D graphics workload = Enabled
D.
Optimize for 3D graphics workload = Enabled
Answers
Suggested answer: D

Scenario: A Citrix Architect needs to manage the disaster recovery (DR) process for a Citrix Virtual Apps and Desktops environment. The environment currently consists of an active data center typically accessed by users, and a DR data center used in the event that a disaster impacts the primary data center. Each data center hosts a separate Citrix Virtual Apps and Desktops Site. The overall environment has been designed to actively replicate user data and application data from the primary data center to the DR data center using Microsoft Distributed File System Replication (DFSR). Management has made it a priority to minimize the loss of data when failing over between data centers.

The primary data center suffers an outage that affects multiple components. As a result, management decides to fail over to the DR data center. The architect has blocked access to the primary data center to prevent new attempts to connect to its Citrix Virtual Apps and Desktops Site. Which two actions must the architect perform to meet company priorities before enabling access to the DR data center? (Choose two.)

A.
Drain existing sessions from the primary data center.
A.
Drain existing sessions from the primary data center.
Answers
B.
Complete data replication from the primary data center to the DR data center.
B.
Complete data replication from the primary data center to the DR data center.
Answers
C.
Replicate the Site's SQL database backups to the DR data center.
C.
Replicate the Site's SQL database backups to the DR data center.
Answers
D.
Evaluate the condition of the Citrix Virtual Apps and Desktops environment in the primary data center.
D.
Evaluate the condition of the Citrix Virtual Apps and Desktops environment in the primary data center.
Answers
E.
Transport backup data repositories to the DR data center.
E.
Transport backup data repositories to the DR data center.
Answers
Suggested answer: A, B

Scenario: A Citrix Architect needs to implement Citrix Virtual Apps and Desktops. Based on the assessment and early stages of the design, the requirements in the exhibit have been identified.

Click the Exhibit button to view the requirements.

Which tier of storage should the architect consider implementing, based on the requirement?

A.
DAS
A.
DAS
Answers
B.
Local
B.
Local
Answers
C.
NAS
C.
NAS
Answers
D.
SAN
D.
SAN
Answers
Suggested answer: D

Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. While performing a capabilities assessment of the existing infrastructure, it was discovered that there are issues with load balancing users, and that the existing load-balancing hardware is outdated. Which capability risk will the architect need to investigate to address these issues?

A.
Windows Server and Active Directory (AD) environments.
A.
Windows Server and Active Directory (AD) environments.
Answers
B.
Citrix Virtual Apps and Desktops environments
B.
Citrix Virtual Apps and Desktops environments
Answers
C.
Network architecture
C.
Network architecture
Answers
D.
Access infrastructure
D.
Access infrastructure
Answers
Suggested answer: C

Scenario: A Citrix Architect is designing a new Citrix Virtual Apps and Desktops environment. The design will require 2 different StoreFront stores share a subscription datastore, and 2 corresponding Citrix Workspace app for Web sites. The solution should remain supported by Citrix. The architect has already installed StoreFront on a server.

How can the architect achieve the desired design while keeping cost and maintenance requirements to a minimum?

A.
Point 1 store to the subscription service endpoint of the other store.
A.
Point 1 store to the subscription service endpoint of the other store.
Answers
B.
Deploy a separate virtual server, install StoreFront on the new virtual server, and update the web.config file.
B.
Deploy a separate virtual server, install StoreFront on the new virtual server, and update the web.config file.
Answers
C.
Make the web.config files of both stores identical.
C.
Make the web.config files of both stores identical.
Answers
D.
Point 1 store to the Citrix Credential Wallet Service endpoint of the other store.
D.
Point 1 store to the Citrix Credential Wallet Service endpoint of the other store.
Answers
Suggested answer: C
Total 99 questions
Go to page: of 10