You power on a Vblock System 320 and look at the Maps tab of an ESXi server in vCenter's Hosts And Clusters view and see an ESXi server with a red "x" over it.What is causing the ESX server problem?

The server is an unsuitable candidate for migration.

The data store is out of space.

You want to configure vMotion on a virtual switch in a Vblock System 320.Which network configuration is required?

Create a VMkernel port group, assign a unique IP address and subnet number, and select the Use This Port Group For vMotion option box.

Create an uplink port group, assign a unique IP address and subnet number, and select the Use This Port Group For vMotion option box.

Create a VMkernel port group on the network management virtual switch, and assign a unique IP address and subnet number.

Create a VMkernel port group on the virtual machine network, and assign a unique IP address and subnet number.

Create a VMkernel port group, assign a unique IP address and subnet number, and select the Use This Port Group For vMotion option box.

What must you do to enable CLI access to the ESXi host through the DCUI?

Configure the troubleshooting options.

Configure the management network.

Configure the troubleshooting options.

Which statement is correct about using VMware Inventory Services?

It improves administrative user performance and reduces traffic with the vCenter.

It tracks virtual machine locations in the data center.

It improves administrative user performance and reduces traffic with the vCenter.

It tracks data center objects and performs reports.

It improves virtual machine responsiveness.

While upgrading five hosts in a vSphere cluster, the maintenance window ends. The customer does not allow you to extend the window, so now the cluster is running the hosts at different build levels. There are two hosts at the new build version, and three hosts at the previous build version. There are 11 virtual machines protected by VMware Fault Tolerance in the cluster. You now see the following error No suitable host can be found to place the Fault Tolerance Secondary VM for virtual machine SalesVM.What is the cause of this error?

Fault Tolerance requires that the hosts for the primary and secondary virtual machines use the same host build number and patch level.

Fault Tolerance has detected a difference between the primary and secondary virtual machines.

Fault Tolerance will not create a Secondary virtual machine in a cluster with mixed build versions.

VMware HA will not function properly in a cluster with mixed build versions, which prevents Fault Tolerance from creating a secondary virtual machine.

According to the VCE Logical Build Guide, what is the recommended installation location for VMware Update Manager and its database in a Vblock System?

Install the application on a standalone server and the database on a shared SQL server.

Install the application and database on the vCenter server.

Install the application and database on a standalone server.

Install the application on the vCenter server and the database on a dedicated SQL server.

Install the application on a standalone server and the database on a shared SQL server.

You are preparing to upgrade the Vblock System to the latest release certification matrix and have a custom ISO file for the vSphere ESXi build on the vCenter server in the DTemp folder.Which process would you use to build and attach a host upgrade baseline?

Launch vCenter; ensure you have Upload file privileges; open VUM; import the ESXi image; create a baseline image; attach the baseline to the target.

Ensure you have Upload file privileges; launch vCenter; open VUM; import the ESXi image; attach the baseline to the target; create a baseline image.

Launch vCenter; ensure you have Upload file privileges; open VUM; import the ESXi image; create a baseline image; attach the baseline to the target.

Launch vCenter; import the ESXi image; ensure you have Upload file privileges; open VUM; create a baseline image; attach the baseline to the target.

A vApp has been deployed with the wrong IP address information and must be updated. You have logged into the virtual machine, and updated the static IP address from the console, validating connectivity. After a system reboot, users are no longer able to connect to the system.What is the problem?

The IP configuration should take place in the vApp container.

vApps require DHCP assigned addresses instead of static.

The segment ID was incorrectly configured for the VXLAN.

The IP configuration should take place in the vSwitch layer.

Click the Exhibit button. Referring to the exhibit, which two actions would allow powering on the virtual machine? (Choose two.)

Decrease the memory reservation on the virtual machine.

Add more memory to the ESXi host.

Increase the memory reservation on the virtual machine.

Decrease the memory reservation on the virtual machine.

Add more memory to the ESXi host.

Increase the amount of memory allocated to the virtual machine.

You are testing DRS as part of the Vblock System 320 deployment and have placed the ESXi server into Maintenance mode. After several minutes, the ESXi server has not completed the transition into Maintenance mode.Which two actions should you perform? (Choose two.)

Verify that DRS is in fully automatic mode.

Verify vMotion is properly configured because DRS requires it to transition operational VMs.

Manually shut down the VMs when you put an ESXi server into Maintenance mode.

Verify that DRS is in fully automatic mode.

Verify VMware HA is configured because DRS requires it to transition the VMs.

Verify vMotion is properly configured because DRS requires it to transition operational VMs.

You enabled access to the ESXi shell. Administrators now complain that they cannot log in to the ESXi shell although you are still logged on.What would cause this problem?

The ESXi shell timeout setting was increased from the default setting of 0.

The other administrators do not have proper permissions.

The number of connections exceed the limit.

The ESXi shell timeout setting was increased from the default setting of 0.

There is an invalid IP setting on the host.

Your vSphere environment has two virtual machines configured to use the same VLAN and subnet. The hosts in the cluster are set up to use one DV switch. You want to ensure that the VMs communicate properly on the network and with each other regardless which host they use.Which action will accomplish this task?

The vNic DVPort group must be configured to be the correct setting on both virtual machines for the VLAN they are using.

Consult with your network team to ensure that the ESXi hosts use common routers and switches in your data center environment.

Ensure the ESXi hosts load balancing policy is configured to route based on source mac hash.

Ensure the ESXi hosts load balancing policy is configured to route based on the originating virtual port ID.

The vNic DVPort group must be configured to be the correct setting on both virtual machines for the VLAN they are using.

You would like to upgrade Update Manager and keep your current database.What will allow you to meet this requirement?

During the upgrade process, make a backup of the existing Update Manager database.

Upgrade the Update Manager plug-in prior to upgrading the Update Manager Server.

During the upgrade process, a backup of the Update Manager database will be taken automatically.

Within the Update Manager plug-in, backup the existing Update Manager database.

During the upgrade process, make a backup of the existing Update Manager database.

In which document would you find information regarding issues encountered with software revisions?

VCE Vblock Administration Guide

VCE Release Certification Matrix

Which steps should be performed to install PowerPathVE updates to the ESXi host through VMware Update Manager (VUM)?

Enter maintenance mode, import patches, create the baseline, attach the baseline, and remediate host.

Disconnect the ESXi host, import patches, create the baseline, attach the baseline, and remediate host.

Import patches, create the baseline, attach the baseline, and install updates.

Import patches, reboot the ESXi host, create the baseline, attach the baseline, and remediate host.

You upgrade an ESXi 4.x host to an ESXi 5.x host using VMware Update Manager. It appears to complete the installation, but the system does not boot.You decide to roll back the host to the previous build. After using the Shift-R option on boot up, you receive the error "No alternative hypervisor to roll back to".What is causing this error?

There are differences in the boot loaders between the two versions.

The hardware is not supported with the ESXi 5.x.

The ISO file in the baseline is corrupt.

The data store containing the operating system has become corrupt.

There are differences in the boot loaders between the two versions.

According to the VCE Vblock System Upgrade Guide for vSphere 5.1, which two steps would be taken when upgrading vCenter to 5.1? (Choose two.)

Make a full backup of the vCenter Server database on the AMP.

Install Microsoft SQL 2008 SP3 on the Single Sign-On (SSO) virtual machine.

Make a full backup of the vCenter Server database on the AMP.

Make a full backup of the vCenter Inventory Service database on the AMP.

Install Microsoft SQL 2008 SP3 on the Single Sign-On (SSO) virtual machine.

Overnight several virtual machines have triggered alarms for guest memory usage.What are the proper steps to acknowledge the alarms while investigating the cause?

From the Status Bar click the alarm button; select Acknowledge the Alarm.

Locate the relevant alarms and reset them.

Notify your monitoring team to disable all virtual machine monitoring; reboot all affected virtual machines and manually monitor their memory usage for the next 60 minutes.

Place all affected virtual machines into suspend until the alarms clear on their own.

From the Status Bar click the alarm button; select Acknowledge the Alarm.

The CIO of your organization requests an audit of all user logins to vCenter with the vSphere client.Which action will allow you to provide this information?

Connect the vSphere client to vCenter and export events.

Run the event_export.sql script in SQL Management Studio on the vCenter database.

Connect the vSphere client to the syslog virtual machine and export events.

Connect the vSphere client to vCenter and export events.

Use the vm-support command on the ESXi host to generate the log bundle.

Your client wants space required for the virtual disk to be allocated when the virtual disk is created. Also, any data remaining on the physical device should not be erased during creation, but be zeroed out on demand, at a later time, on the first write from the virtual machine.Which storage provision type would you use to meet the client's requirements?

thick LUN provisioning, lazy zeroing

thick LUN provisioning, eager zeroing

thin LUN provisioning, eager zeroing

thin LUN provisioning, lazy zeroing

thick LUN provisioning, lazy zeroing

In a standard Vblock System 300 configuration with two vHBAs, the VNX Storage Processor A (SP-A) has rebooted.How will the hosts be impacted?

Both vHBAs will lose a single path to all storage devices on that VNX.

A single vHBA will lose all paths to some of the storage devices on that VNX.

A single vHBA will lose all paths to all storage devices on that VNX.

Both vHBAs will lose a single path for some of the storage devices on that VNX.

A customer requests a disjointed Layer 2 configuration on their ESXi hosts to segregate DMZ traffic.Which additional component is required in this configuration?

an extra set of physical adapters

an access control list for DMZ VLAN

an extra set of physical adapters

You are asked to perform an in-place upgrade of an ESXi 4 server to an ESXi 5 while maintaining the network settings.What are three ways to accomplish this task? (Choose three.)

using an interactive upgrade from CD, DVD, or USB drive

Which three components are part of the Vblock System Release Certification Matrix? (Choose three.)

VMware vCenter Operations Manager

Which two methods would you use to deploy an ESXi image created with Image Builder CLI? (Choose two.)

burning it to an installation DVD

using the Auto Deploy feature in vCenter Server

burning it to an installation DVD

using the Auto Deploy feature in vCenter Server

An ESXi host is running a licensed version of PowerPathVE. A single path to a PowerPathVE- controlled device is lost.Which two statements are true? (Choose two.)

After the path has been repaired, PowerPathVE will automatically restore the path and resume IO down the path.

The periodic testing of live and dead paths is low priority for PowerPathVE.

The time required to restore a failed path on a heavily loaded system is less than the time required on a lightly loaded system.

After the path has been repaired, PowerPathVE will automatically restore the path and resume IO down the path.

The only way to restore a failed path is with the rpowermt restore CLI command.

The periodic testing of live and dead paths is low priority for PowerPathVE.

A customer questions the VCE recommended security guideline of disabling the ability to shrink a virtual disk from within the virtual machine.Which statement accurately represents the potential outcomes of this guideline?

The repeated use of this ability can cause the virtual disk to become unavailable during the shrink process, effectively causing a denial of service.

The use of this ability can result in the loss of user data inside the virtual machine disk file.

The use of this ability can result in increased host resource utilization, reducing the resources available to other virtual machines.

The repeated use of this ability can cause the virtual disk to become unavailable during the shrink process, effectively causing a denial of service.

Disabling this ability prevents the reclamation of free space on thin-provisioned disk files.

A customer calls complaining that their CDDVD drive is no longer accessible on their virtual server. After investigating, you notice their virtual server is configured for VMware Fault Tolerance enabled.Which condition would cause this situation to occur?

The source ISO is not on shared storage.

The secondary node has Connect at power on disabled.

The secondary node has Use a physical drive selected.

The source ISO is not on shared storage.

The auto detect option is not selected.

A user mentions that they are unable to migrate a virtual machine, but the user is able to power down and power on the virtual machine. The option to migrate is grayed out.When inspecting the user's roles and permissions, which two settings would cause this problem? (Choose two.)

The user does not have administration privileges.

The user's permissions does not allow the privilege to migrate virtual machines.

The user has read-only rights to the virtual machine.

The user is part of a user group that has the privilege to migrate virtual machines.

The user does not have administration privileges.

The user's permissions does not allow the privilege to migrate virtual machines.

You are asked to setup several ESXi hosts so that they boot from SAN. After completing the second host and powering it on, the ESXi image becomes corrupt.What is the cause?

The two hosts were configured to share the same boot LUN.

The shared LUN is out of space.

A port on the Cisco MDS switch was improperly configured.

The two hosts were configured to share the same boot LUN.

VCE 210-015 Practice Test 2 - Free Online Exam Prep & Questions

Question 1 / 40

You want to reset hardware sensors in the vSphere client connected to vCenter.

Which statement describes how to accomplish this task?

From the Hosts and Clusters view select a host, select the Hardware Status tab, and select the Reset sensors button.

From the Hosts and Clusters view select a host, select the Summary tab, select the Reset sensors button.

Select a virtual machine on the host, install the VMware tools, and reboot the host.

Hardware status can only be reset from the command line.

Comment (0)

VCE 210-015 Practice Test 2

Question

VCE 210-015 Practice Tests

Practice Tests