Your Vblock® System 720 was set up with a FAST VP policy of 100% EFD, 100% FC, with 100% SATA, and then applied the policy to all the storage groups. You have allocated all thin LUNs from the Fibre Channel pool and would like to ensure that all but 10% of the EFD drives can be used by the FAST policy.Which setting would you use to accomplish this task?

Adjust the Pool Reserved Capacity to 10.

Adjust the compression rate to 10.

Adjust the Data Movement Mode to 10.

Adjust the Relocation Rate to 10.

You are asked to add a new ESXi host to an existing VMware cluster. You identify an available blade with the same specifications.Which statement is a VCE recommendation?

Hosts in a VMware cluster should always belong to the same service profile template.

Hosts in a VMware cluster should each belong to a different VSAN.

Service profiles in a VMware cluster should be kept on as few chassis as possible.

Service profiles in a VMware cluster should be spread out over as many Vblock® Systems as possible.

Hosts in a VMware cluster should always belong to the same service profile template.

You have added physical disks to your Vblock® System 720 to a physical disk group and then created data devices.What must you do to see the new capacity?

Add the devices to the thin pool and enable them.

Add the devices to the masking group.

Map the devices to the front end ports.

Add the devices to the thin pool and enable them.

Add the devices to the FAST VP policy.

Click the Exhibit button.-- Exhibit -- -- Exhibit --You are adding a new VM within vCenter when the error shown in the exhibit occurs.What does this error indicate?

The Nexus 1000V switch has run out of ports.

The Standard vSwitch has run out of ports.

The Standard vSwitch has run out of port licenses.

The Nexus 1000V switch has run out of port licenses.

The Nexus 1000V switch has run out of ports.

You have a single storage pool that has been dedicated for quality assurance and development purposes. Both groups have submitted requests for LUNs, but the total LUN capacity requested exceeds the total available capacity of the pool by several terabytes.What would you do to satisfy both groups' requests?

Use thin provisioned LUNs to oversubscribe capacity.

Split the total pool capacity equally between both groups.

Use thin provisioned LUNs to oversubscribe capacity.

Provide network file space to offset the difference.

You are using expandable resource pools in your VMware cluster to ensure each environment is allocated the appropriate resources. There is a resource pool for your development environment that has a reservation of 5 GHz CPU and 12 GB of memory. There is a child resource pool of the development resource pool named Sandbox that has a reservation of 1 GHz CPU and 4 GB of memory. You create four new virtual machines with 4 GB of memory in the Sandbox environment.In this scenario, which statement is true?

All new virtual machines will power on.

Only one of the new virtual machines will power on.

All new virtual machines will power on.

Only three of the new virtual machines will power on.

No new virtual machines will power on.

You attempt to activate a port on an MDS using the port-license acquire command and the switch returns the message "port activation license not available".How would you determine if you have sufficient licenses?

Run the show port-license command to display the available port activation licenses.

Run the show license command to display the available license information.

Run the show run command to see the license configuration.

Run the show port-resources module command to display the available port resources in a module.

Run the show port-license command to display the available port activation licenses.

While monitoring your PowerPath/VE licensing, you notice that some of your hosts are no longer licensed.In this scenario, which statement is correct?

PowerPath will continue to route traffic but will lose some management features.

PowerPath will continue to function but will not allow more devices to be configured.

PowerPath will route all traffic down one path, disabling the alternative path.

PowerPath will switch to round robin mode but will not allow more devices to be configured.

PowerPath will continue to route traffic but will lose some management features.

How do you create a log bundle for the Nexus 1000V virtual switch module (VSM)?

Run the show tech-support svs > bootflash:techsupport.log command from the VSM shell.

Use the vCenter client to generate a VMware support bundle.

Execute the vem-support all command from the shell on each ESXi host.

Run the show tech-support svs > bootflash:techsupport.log command from the VSM shell.

Use the Java-based Nexus 1000V log bundle creator on the element manager.

While troubleshooting a VCE VisionTM Intelligent Operations problem, you notice that the rsyslog file was empty.Which action should you perform first?

Start an SSH session to the VCE Vision software system library and verify the service status.

Start an SSH session to the VCE VisionTM software system library and verify the FMagent status.

Log on to the vSphere Web Client and verify that the VCE Vision software system library was installed.

Start an SSH session to the VCE Vision software system library and verify the service status.

Log on to the Vision GUI, and run a compliance report.

A physical server in the Vblock® System 200 is experiencing intermittent problems.What does VCE recommend to log the events?

Add an SNMP server using Cisco Integrated Management Controller.

Add a network time protocol (NTP) server to the Cisco UCS instance.

Use VCE VisionTM Intelligent Operations to monitor and alert all connectivity issues.

Use SNMP and e-mail all severity one alerts.

Add an SNMP server using Cisco Integrated Management Controller.

You have a problem with a Vblock® System 340 VNX array. While talking with support, they request that you generate an SP Collect and send it to them.How do you collect this data?

Log into USM, click on Diagnostics and Capture Diagnostics Data.

Log into USM and send diagnostics data to VCE VisionTM Intelligent Operations.

Log into USM, click on Diagnostics and Capture Diagnostics Data.

Log into USM, generate SP Collect, and get SP Collect for each SP.

Log into USM, Capture Diagnostic Data, and get capture diagnostic data.

By not deleting their snapshots, a customer filled a data store to 100% capacity preventing other VMs sharing the same data store from starting or restarting.Which vCenter operation would have helped identify this problem?

Use the vCenter alarm set to trigger a reporting action once the data store reached capacity.

Use the vCenter VCE VisionTM Intelligent Operations monitoring plugin.

Use the vCenter alarm set to trigger a reporting action once the data store reached capacity.

Use the vCenter thin to thick vmdks to force a static quota.

Use vCenter Orchestrator to create a new data store and migrate when needed.

An application can no longer access its allocated storage on a Vblock® System 340.According to Cisco MDS troubleshooting guidelines, which action would be used to investigate the problem?

Determine if the host recognizes any LUNs in the VNX storage system.

Use Unisphere to view fabric problems.

Determine if the host has ever been able to see VNX storage.

Determine if the host recognizes any LUNs in the VNX storage system.

Which two components are part of the Vblock® System infrastructure? (Choose two)

Production application software

You are making some changes in connectivity in your network layer and are concerned about the port licensing on your Fabric Interconnect.If you disable a port, which statement is true?

The licenses are dynamically added back to the license pool.

You must log into the Fabric Interconnect to de-authorize the license assigned to that port.

You must edit the license file on the Fabric Interconnect to specify which license is now free.

The licenses are dynamically added back to the license pool.

You must force a license rescan on your UCS to recapture the license.

You are working with VCE Support and are asked to send the complete support log bundle for your MDS switch.Which statement describes what you should do?

Connect to the MDS switch and run the show tech-support detail command.

Connect to the MDS switch and run the show accounting log command.

Connect to the MDS switch and run the show flogi command.

Connect to the MDS switch and run the show tech-support detail command.

Connect to the MDS switch and run the show zone analysis vsan command.

You need to reconfigure storage on your VNX and you do not want to disrupt your ESXi host. This activity will require rebuilding some of the LUNs that are currently presented to ESXi hosts.Which action must be performed on vCenter to meet this requirement?

Unmount data stores associated with LUNs that will be reconfigured.

Rename data stores associated with LUNs that will be reconfigured.

Enable storage I/O control on data stores associated with LUNs that will be reconfigured.

Upgrade the data store to VMFS5.

You are asked to permanently shrink a vSphere cluster from five nodes to four nodes. You confirm that all five ESXi hosts are at less than 20%utilization. You also confirm that VMware DRS is properly configured and running on the cluster.Which procedure should be followed to shrink the cluster?

In vCenter, put the ESXi host into maintenance mode, remove the host from the cluster; in UCSM, stop the server then delete the service profile.

In UCSM, stop the server then delete the service profile; in vCenter, delete the host.

In vCenter, put the ESXi host into maintenance mode, remove the host from the cluster; in UCSM, stop the server then delete the service profile.

In vCenter, put the ESXi host into maintenance mode, remove the host from the cluster; in UCSM, stop the server then disconnect the service profile.

In UCSM, stop the server then delete the service profile; in vCenter, put the ESXi host into maintenance mode, remove the host from the cluster.

You need to clean up your UCS environment. You discover that you have old UCS software bundles in your UCS system. You want to delete these bundles from the system, but not create faults.Which action should you perform prior to deletion?

Delete any host firmware packages that use those bundles.

Change your reboot policy to User Ack.

Ensure that there are no pending activities.

Ensure that no components have this firmware in their backup versions.

You are managing a Vblock® System and have been asked to prove the Vblock® System is using the most recent firmware version across all components in their environment.Which VCE VisionTM Intelligent Operations feature would you use to accomplish this task?

Adapter for vCenter Operations Manager

An existing customer wants to add external IP addresses to its management pool.Which element manager would you recommend?

VCE VisionTM Intelligent Operations

Your company wants to change a new host firmware package in a service profile.What must you consider before completing this task?

Host firmware package changes might cause the blade to reboot.

Host firmware packages do not have adapter settings.

Host firmware packages can only be used in one service profile.

Host firmware package settings can change network settings.

Host firmware package changes might cause the blade to reboot.

You provisioned a new LUN in your Vblock® System 340 that needs to be added to a VM as an RDM.Which operation should be performed first to accomplish this task?

Rescan the HBAs on all of the ESXi servers in your Vblock® System.

Select Physical Compatibility so that all SCSI commands will be passed from the guest OS.

Select VMDirectPath I/O passthrough and choose a multi-root I/O device on the host so that all SCSI commands will be passed from the guest OS.

Rescan the SCSI bus on the guest operating system to make the RDM devices visible.

Rescan the HBAs on all of the ESXi servers in your Vblock® System.

You are using the default settings for VCE VisionTM Intelligent Operations. Three minutes after an event is reported in UCSM, it is still not reported in Vision.Which statement is correct?

VCE Vision software is operating as expected.

Verify the network connection between the system library virtual machine to the UCSM's virtual IP address.

VCE VisionTM software login credentials on vCenter may be incorrect.

Verify your HTTP settings in UCSM.

VCE Vision software is operating as expected.

VCE 220-010 Practice Test 2 - Free Online Exam Questions 41-80

You are working on latency problems with a storage pool in your Vblock® System 340. After investigation, you decide that the FAST Cache must be expanded on the VNX.

What is required to accomplish this task?

Become a Premium Member for full access

Unlock Premium Member

VCE 220-010 Practice Test 2

Question

Drag and Drop

Hot Area

VCE 220-010 Practice Tests

Practice Tests