A company has deployed a private cloud solution based on VMware Cloud Foundation (VCF). To support the need to develop Kubernetes-based applications using vSphere with Tanzu within the private cloud, an administrator has been tasked with deploying a new VCF Workload Domain.The administrator has successfully checked that all prerequisites for the new Workload Domain have been completed.Which lifecycle management method should the administrator select when deploying the new Workload Domain?

VMware vSphere Lifecycle Manager Images

VMware vSphere Update Manager Baselines

VMware vSphere Lifecycle Manager Baselines

VMware vSphere Lifecycle Manager Images

VMware Aria Universal Lifecycle Updates

What is the reason to use a custom profile type when deploying an NSX Edge cluster via SDDC Manager?

If the environment requires a Bidirectional Forwarding Detection (BFD) configuration.

If the environment requires the OSPF routing protocol.

If the NSX Edges need to be deployed to a workload domain with Workload Management enabled.

If the environment requires that the NSX Edge's utilize load balancing.

If the environment requires a Bidirectional Forwarding Detection (BFD) configuration.

Which two steps would an administrator complete to upgrade the components of a VMware Cloud Foundation (VCF) aware Aria Suite? (Choose two.)

Upgrade Aria Suite components through Aria Suite Lifecycle

Upgrade Aria Suite Lifecycle through the SDDC Manager

Upgrade Aria Suite components through Aria Suite Lifecycle

Upgrade Aria Suite components directly and then refresh the SDDC Manager repository

Upgrade Aria Suite Lifecycle through the SDDC Manager

Upgrade Aria Suite Lifecycle directly since it is an independent component

Upgrade Aria Suite components through the SDDC Manager

An administrator is planning to upgrade an existing VMware Cloud Foundation (VCF) environment:* 2 VCF instances across 2 sites* NSX Federated environment* 1 VMware Cloud Director instance at each site* Aria suite at each siteWhich three components can be upgraded as part of the VCF automated lifecycle management via SDDC manager? (Choose three.)

VMware Cloud Provider Lifecycle Manager

Which two are valid considerations describing VMware Cloud Gateway in VMware Cloud Foundation+ (VCF+) environment? (Choose two.)

It connects to on-premises SDDC Manager.

It is deployed in VCF Management Domain.

It is deployed in the VCF VI workload domain.

It connects to on-premises SDDC Manager.

It must be configured with dynamically assigned IP address using DHCP

It is deployed in VCF Management Domain.

It connects directly to vCenter Server.

A large research facility has implemented VMware Cloud Foundation (VCF) in their environment. For their R&D VI Workload Domain to host their Virtual Machines, they use DHCP for their NSX Host Overlay Network TEPs, a dedicated vSAN Storage Policy for the cluster, and vSphere Lifecycle Manager images. For better resiliency, the administrator wants to stretch the cluster.What will stop the administrator from creating a stretched cluster?

The cluster uses DHCP for the NSX Host Overlay Network TEPs.

The cluster is enabled for Workload Management.

The cluster uses dedicated vSAN Storage Policy.

The cluster uses vSphere Lifecycle Manager images.

The cluster uses DHCP for the NSX Host Overlay Network TEPs.

A vSphere administrator has changed a VMware Cloud Foundation (VCF) managed password at the component level and wants to update the respective credentials in the SDDC manager.What steps are required to accomplish this?

1. Log in to SDDC manager 2. Go to the password management section 3. Select the component for which the password was changed 4. Select the update option

1. Log into the SDDC manager 2. Go to the workload domain section 3. Select the component for which the password was changed 4. Select the update option

1. Log in to SDDC manager 2. Go to the password management section 3. Select the component user for which the password was changed 4. Select the remediate option

1. Log in to SDDC manager 2. Go to the password management section 3. Select the component for which the password was changed 4. Select the rotate now option

1. Log in to SDDC manager 2. Go to the password management section 3. Select the component for which the password was changed 4. Select the update option

An administrator is tasked with enabling Workload Management on a VMware Cloud Foundation (VCF) Workload Domain. The administrator is concerned about the networking requirements for the Supervisor control plane VMs.Which network considerations should be taken into account?

Control plane VMs connect to the floating IP address on the management network.

Pod control plane communication uses the production network.

Control plane VMs connect to the floating IP address on the production network.

Control plane VMs connect to the floating IP address on the management network.

Pod control plane communication uses the management network.

A new devops team has been created to conduct a Proof of Concept using vSphere with Tanzu for large scale app deployment. The administrator must use SDDC Manager to deploy the Workload Management solution to a newly created workload domain.Which option is required for the Workload Management solution to deploy correctly?

A new Workload Management ready NSX Manager cluster must be deployed to the Workload Domain.

The SDDC Manager must have the vSphere with Tanzu license applied.

A Workload Management ready NSX Edge cluster must be deployed to the Management Domain.

The ESXi Hosts must have the vSphere with Tanzu license applied.

A new Workload Management ready NSX Manager cluster must be deployed to the Workload Domain.

An administrator is tasked with upgrading vCenter Server in the VMware Cloud Foundation (VCF) environment as a new full-release version of vCenter Server has been released, which involves major changes in the software and requires an upgrade from the previous version.What steps should be performed by the administrator to complete the task?

Wait for the new VCF release and perform a normal lifecycle management process

Use Async Patch Tool in online mode to upgrade vCenter Server to the newest version

Use Async Patch Tool in offline mode to upgrade vCenter Server to the newest version

Wait for the new VCF release and perform a normal lifecycle management process

Use vCenter Appliance Management Interface (VAMI) to upgrade vCenter Server to the newest version

Management has asked the cloud administration team to investigate transitioning to the VMware Cloud Foundation+ (VCF+) licensing model. The cloud administration team found there are workload domain limitations.For VMware Cloud Foundation 5.0 + licensing, which maximum Workload Domain deployment architecture is supported?

4 additional Workload Domains beyond the Management Domain

8 additional Workload Domains beyond the Management Domain

4 additional Workload Domains beyond the Management Domain

Which two prerequisites must be met before an NSX Edge cluster can be deployed through SDDC Manager in a VI Workload Domain? (Choose two.)

Host overlay and Edge overlay networks must be routable

The FQDN of the NSX Edge nodes must be resolvable through DNS

Host overlay and Edge overlay networks must be routable

vMotion and Edge overlay networks must be routable

The NSX Edge nodes must be configured through an LDAP provider

SSH must be enabled on the NSX Edge nodes

The FQDN of the NSX Edge nodes must be resolvable through DNS

Which step must be performed before commissioning the hosts for a new Workload Domain that is going to use NFS as the principal storage?

Configure the NFS VMkernel network adapter

Create a new network pool in SDDC Manager

Configure the NFS VMkernel network adapter

Expand the network pool for the Management Domain

Deploy a virtual distributed switch using vSphere Client

What is the correct order of steps required to deploy a new Workload Domain in a VMware Cloud Foundation (VCF) environment?

1. Install the ESXi hypervisor 2. Commission hosts 3. Create a network pool 4. Assign permissions on the newly deployed vCenter Server 5. Deploy Workload Domain

1. Commission hosts 2. Install the ESXi hypervisor 3. Create a network pool 4. Deploy Workload Domain 5. Assign permissions on the newly deployed vCenter Server

1. Install the ESXi hypervisor 2. Create a network pool 3. Commission hosts 4. Deploy Workload Domain 5. Assign permissions on the newly deployed vCenter Server

1. Install the ESXi hypervisor 2. Commission hosts 3. Assign permissions on the newly deployed vCenter Server 4. Create a network pool 5. Deploy Workload Domain

Which two are required components of NSX Federation in VMware Cloud Foundation? (Choose two.)

Universal Distributed Logical Router

Cross-region Application Virtual Networks

A company has recently deployed a new VMware Cloud Foundation (VCF) virtual infrastructure. Maintenance on the virtual infrastructure is scheduled. The administrator is tasked to safely shutdown the VI Workload Domain.What is a prerequisite before shutting down the VI Workload Domain?

Verity that complete backups of all management components are available

Verify that the Management Domain components have been shutdown

Verity that complete snapshots of all management components are available

Verity that the Aria Suite solutions have been shutdown

Verity that complete backups of all management components are available

Which two are functions of a vSphere Namespace in a Tanzu-enabled VMware Cloud Foundation (VCF) Workload Domain? (Choose two.)

Sets a resource boundary for Tanzu Kuberetes Grid clusters within a VCF instance

Provides access control to resources provisioned within the Namespace

Creates an NSX virtual server in an NSX load balancer

Sets a resource boundary for Tanzu Kuberetes Grid clusters within a VCF instance

Centralizes management of Tanzu Kubernetes Grid clusters across multiple VCF instances

Stores ISO images and VMDKs to deploy containerized workloads

Provides access control to resources provisioned within the Namespace

An administrator is tasked with limiting the number of Pods that the developers team can create in their vSphere namespace in the existing VMware Cloud Foundation (VCF) environment.What are the required steps to accomplish this task in the vSphere Client, Workload Management?

1. Select the developers vSphere Namespace 2. Select Configure and select Object Limits 3. Edit vSphere Pods limits

1. Select the developers Tanzu Kubernetes Cluster 2. Select Configure and select Object Limits 3. Edit Tanzu Kubernetes Cluster Pods limits

1. Select the developers Tanzu Kubernetes Cluster 2. Select Configure and select Object Limits 3. Edit vSphere Pods limits

1. Select the developers vSphere Namespace 2. Select Configure and select Object Limits 3. Edit vSphere Pods limits

1. Select the developers vSphere Namespace 2. Select Configure and select Object Limits 3. Edit Tanzu Kubernetes Cluster Pods limits

VMware 5V0-31.23 Practice Test 2 - Free Online Exam Questions 41-70

A VMware Cloud Foundation (VCF) administrator deployed a VI Workload Domain for the purpose of a required vSphere with Tanzu environment. When deploying the NSX Edge cluster, the administrator needs to select an NSX Edge VM form factor.

Which is the minimal NSX Edge VM form factor that the VCF administrator should select?

Become a Premium Member for full access

Unlock Premium Member

VMware 5V0-31.23 Practice Test 2

Question

VMware 5V0-31.23 Practice Tests

Practice Tests