Which three Avaya Aura® components can be deployed as virtual machines?(Choose three.)

Avaya Aura® Media Server (AAMS)

Avaya Aura® Session Manager (SM)

Avaya Aura® Communication Manager (CM)

Avaya Aura® Media Server (AAMS)

Avaya Aura® Session Manager (SM)

Avaya Virtual Services Platform (VSP) 7200 series

Avaya Aura® Communication Manager (CM)

When deploying applications on Application Virtualization Platform (AVP), to allow network, connectivity through the services port on each AVP host server, which additional application must be also deployed?

Secure Access Link (SAL) Gateway

Avaya Aura® System Manager (SMGR)

Which three features does Utility Services (US) provide?(Choose three.)

Delivers certificates to IP endpoints

Engagement Development Platform

Which event triggers the activation of Avaya Aura® Communication Manager (CM) Survivable Server so it can accept H.323 registrations and/or make IP trunks active?

the first H.323 Registration Request the CM Survivable Server receives from any H.323 Endpoint, after the Endpoint loses contract with the Main CM Server

a broadcast message from the Main CM Server right before it goes in failure

the first H.323 Registration Request the CM Survivable Server receives from any H.323 Endpoint, after the Endpoint loses contract with the Main CM Server

the interruption in the RAS keep alive link between CM Main and CM Survivable Servers

the availability of DSP Resources in the CM Survivable Server, the registration of either a Media Gateway or an Avaya Aura® Media Server with that CM Survivable Server.

In a survivable Aura® core solution, for Avaya Aura® Communication Manager (CM) Main Core to successfully send its translations to the Survivable Remote Server, which three actions need to be performed? (Choose three.)

The File Synchronization Address(s) must be configured in SMI of the survivable server to point to Core CM.

The survivable CM server must register with Processor Ethernet or CLAN of Main Core.

The survivable server and Core CM must have different Module IDs (MID).

The File Synchronization Address(s) must be configured in SMI of the survivable server to point to Core CM.

The survivable server and Core CM(s) must have same “Server ID”.

The survivable CM server must register with Processor Ethernet or CLAN of Main Core.

The survivable server and Core CM must have different Module IDs (MID).

How do H.323 Endpoints know which Survivable Server to contact for registration in failover mode?

The Node-Name of the Survivable Server must be entered in the IP-Network-Region SAT form for the H.323 endpoints within that Network Region.

The IP address of the Survivable Server must be manually entered in each H.323 endpoint client device.

The IP address of the Survivable Server must be manually entered in the Station SAT form for each Endpoint in Avaya Aura® Communication Manager (CM).

The Survivable Server broadcast its own IP address through the entire network so the Endpoints learn about the Survivable Server automatically.

To make an Avaya Aura® Communication Manager (CM) Survivable Server work successfully, which two interfaces must be configured? (Choose two.)

the Processor Ethernet or C-Lan board (in legacy installations) for RAS Keep-alive registration with the Main CM Server

the individual IP address of the two CM Main Servers in a Cluster (or the only Main CM Server if Simplex) for ACP Translations-file Synchronization.

the IP address of the FTP Backup Server that holds the latest Backup copy of the CM Main Server

the IP Address of the Media Gateways and Avaya Aura® media Servers that will register with it during failover mode

the Processor Ethernet or C-Lan board (in legacy installations) for RAS Keep-alive registration with the Main CM Server

the IP address of all Endpoints that will register with it upon an outrage

the individual IP address of the two CM Main Servers in a Cluster (or the only Main CM Server if Simplex) for ACP Translations-file Synchronization.

Which protocol is used for sending Feature Buttons and Dial Plan information to an Avaya Aura® Communication Manager controlled SIP Endpoint, also known as Avaya SIP Telephone (AST)?

Personal Profile Management (PPM)

Session Description Protocol (SDP)

A large Enterprise is using an Avaya Aura® Core. An Avaya SIP Endpoint, one-X® Communicator, controlled by Avaya Aura® Communication Manager (CM), has been configured with three feature buttons, but none of the buttons appear on the telephone interface. The telephone shows successful registration with Avaya Aura® Session Manager (SM) at the SIP Level.What is the cause of this problem?

The Application Sequence for CM has not been selected for that extension in SM.

The SIP Signaling Group between SM and CM is down.

The telephone is pointing to CM instead of SM for registration.

CM has no DSP Resources available.

The Application Sequence for CM has not been selected for that extension in SM.

You need to convert a one-X® Communicator from H.323 mode to SIP. You have accessed the settings menu and checked the SIP radio button. You need to enter the SIP domain, but the SIP domain field is not being displayed.Why is this happening?

The softphone needs to restart to offer the correct menu.

The SIP TLS certificate needs to be installed.

You need to Enable SIP in the Preferences menu.

This version of one-X® Communicator only supports H.323.

The softphone needs to restart to offer the correct menu.

When you attempt to login your one-X® Communicator using TLS it fails displaying a Login Error: “The security certificate required for login is not installed. Please contact your support team.”What must be done to fix this error?

Install the Certificate Authority certificate that signed Avaya Aura® Session Manager’s (SM) Identity certificate into the Trusted Root Certificate Authorities on the PC.

Install the SM Identity certificate into the Trusted Root Certificate Authorities on CM.

Install the Certificate Authority certificate that signed Avaya Aura® Session Manager’s (SM) Identity certificate into the Trusted Root Certificate Authorities on the PC.

Import the Identity Certificate from the Security menu of the one-X® Communicator.

Export the identity certificate from Avaya Aura® Session Manager and Import it into the PC using copy and paste.

To make up the Avaya Aura® Core, which three link or relationships are the minimum that must be built? (Choose three.)

a trust relationship between Avaya Aura® System Manager (SMGR) and Avaya Aura® Session Manager (SM)

a CM managed element to Avaya Aura® System Manager (SMGR)

a SIP Trunk between Avaya Aura® Session Manager (SM) and Avaya Aura® Communication Manager (CM)

an LDAP link from Avaya Aura® System Manager (SMGR) to the corporate Directory Server

a trust relationship between Avaya Aura® System Manager (SMGR) and Avaya Aura® Session Manager (SM)

a SIP Trunk between Avaya Aura® Communication Manager (CM) and Avaya Aura® System Manager (SMGR)

a CM managed element to Avaya Aura® System Manager (SMGR)

a SIP Trunk between Avaya Aura® Session Manager (SM) and Avaya Aura® Communication Manager (CM)

What is the Avaya Aura® Media Server?

It is a software-based media server, providing soft DSP/media channel resources.

It is a multi-media conferencing engine with web-scheduling capabilities.

It is a software-based media server, providing soft DSP/media channel resources.

It is a hardware-based multi-processor providing routing capabilities to the Branch Office.

It is a Social Media platform that hosts shared videos in a cloud.

After deploying an Avaya Aura® Communication Manager (CM) Duplex pair, and configuring the cluster in SMI to form an HA System, you decide to start configuring the system using SAT. On entering SAT, on the active server you discover the “Add” option is missing from the list of commands available when you press F5.Which action would you take to solve this problem?

Execute save translations and then reset system 4.

Install the CM license on WebLM and point CM to the WebLM IP address.

Install the CM authentication file.

Reboot both Active and Standby servers.

You have performed the following tasks to check Communication Manager (CM) is ready for service:-CM Server Web Communication Interface access.-CM SAT Application Configuration Interface access.-Install the authentication file.-Verify that CM is using the right Licensing Server and license is installed. -VerifyCM Version.You try to register an H.323 telephone but it is being rejected by CM.What is causing the problem?

No DSPs have been configured yet, so it is normal for the registration to be rejected.

No Signaling Group or Trunk Group has been configured to Avaya Aura® Session Manager (SM).

The COR of the station needs to be changed to allow registration.

The H.323 telephone needs firmware upgrading.

You have configured a TLS link between Avaya Aura® Communication Manager (CM) and Avaya Aura® Session Manager (SM). SM is using Identity certificates that have been signed by Avaya Aura® System Manager (SMGR) Certificate Authority (CA).Which three tasks must be completed for the signaling link between CM and Avaya Aura® Session Manager (SM) to come into service? (Choose three.)

Download “binary/to IE” from Avaya Aura® System Manager (SMGR).

Download “PEM file” from Avaya Aura® System Manager (SMGR).

Add the CA certificate to CM using “Security/ Trusted Certificates”.

Download “binary/to IE” from Avaya Aura® System Manager (SMGR).

Upload CA certificate to CM using “Miscellaneous/Download files” on SMI screen.

Download “PEM file” from Avaya Aura® System Manager (SMGR).

Add the CA certificate to CM using “Security/ Trusted Certificates”.

Export SM Identity certificate from SMGR and import it into CM suing “Security/Trusted Certificates”.

Which statement about making Avaya Aura® Communication Manager (CM) work successfully as a feature server for CM SIP Endpoints (AST Endpoints) is true?

CM must be added as an Application, in an Application Sequence for Avaya Aura® Session Manager (SM).

CM does not support SIP Endpoints in Aura® 7.x.

A SIP Trunk between CM and Avaya Aura® Session Manager (SM) is enough, no further administration is required.

CM must be added as an Application, in an Application Sequence for Avaya Aura® Session Manager (SM).

Endpoint must register directly with CM.

Which two options represent a function of a Digital Signal Processor (DSP)? (Choose two.)

Convert between two different Codecs.

Convert between Analogue speech & Digital Audio.

Convert from Signaling to Audio.

Convert between two different Codecs.

Analyze and route SIP Signaling.

Convert between Analogue speech & Digital Audio.

How many servers does the Avaya Aura® Communication Manager (CM) High Availability Duplex Cluster have?

4 servers (2 Active+ 2 Standby)

What are the three key roles and functions of Avaya Aura® System Manager?(Choose three.)

Certificate Authority (CA) enabling secured network

Event and alarm Monitoring SNMP

Single sign-on to central management interface

Certificate Authority (CA) enabling secured network

Event and alarm Monitoring SNMP

Single sign-on to central management interface

In Avaya Aura® System Manager (SMGR), the option “Services/Events/Alarms” is used to perform which three functions? (Choose three.)

Get the dashboard information of Avaya Aura® Session Manager.

Which statement regarding the Avaya Aura® System Manager (SMGR) Log and Alarm exporting capabilities is true?

Both Alarms and Logs can be exported form their respective viewers.

Logs and Alarms are exported using the Log Harvester.

Both Alarms and Logs can be exported form their respective viewers.

Alarms can be exported but logs cannot.

Alarms and logs can be exported but logs need to harvested first.

How would you deploy Avaya Aura® System Manager (SMGR) onto an Appliance Virtualization Platform (AVP)?

Use Solution Deployment Manager (SDM) client installed on a PC.

Run the SMGRInstaller from AVP command line.

Use Solution Deployment Manager (SDM) client installed on a PC.

You have performed the following tasks to check Communication Manager (CM) is ready for service:-CM Server Web Configuration Interface access.-CM SAT Application Configuration Interface access.-Install the authentication file.-Verify that CM is using the right Licensing Server and license is installed. -VerifyCM Version.You try to register an H.323 telephone but it is being rejected by CM.What is causing the problem?

No DSP resources are available since the Media GW is not registered or AMS is not in service to provide DSP.

No Signaling Group or Trunk Group has been configured to Avaya Aura® Session Manager (SM).

The COR of the station needs to be changed to allow registration.

The H.323 telephone needs firmware upgrading.

Which statement about the Avaya Aura® Session Manager (SM) license is true?

The SM license will install on System Manager, and the Server Host ID is the Server ID of the embedded WebLM Server in System Manager.

The Session Manager does not need a license.

The SM license Server HOST ID is the MAC ID of Session Manager.

The SM license will install on Session Manager, and the Server Host ID is the Server ID of Avaya Aura® System Manager.

The SM license will install on System Manager, and the Server Host ID is the Server ID of the embedded WebLM Server in System Manager.

Which three statements about Solution Deployment Manager (SDM) are true?(Choose three.)

SDM comes as part of Avaya Aura® System Manger 7.x.

SDM can install Avaya Aura® Session Manager (SM) on an Avaya Virtualized Platform (AVP) host.

SDM can be installed as client on your laptop.

SDM can be installed on Macintosh.

SDM can be downloaded as an Android application on a tablet.

SDM comes as part of Avaya Aura® System Manger 7.x.

SDM can install Avaya Aura® Session Manager (SM) on an Avaya Virtualized Platform (AVP) host.

SDM can be installed as client on your laptop.

What new technologies did Avaya introduce with Avaya Aura® 7.x to host virtual machines?

Avaya Virtualization Platform (AVP)

How does an Avaya Aura® Branch Session Manager and its Survivable Communication Manager communicate?

By using the SIP Entity & Entity Link manually created between the Branch Session Manager and the Survivable Communication Manager

By using the synchronization process B.By using the Replication process

By using the SIP Entity & Entity Link manually created between the Branch Session Manager and the Survivable Communication Manager

By using a link that is automatically created after you built the Entity link between your Branch Session Manager and Main Communication Manager

To ensure that your Survivable Communication Manager (CM) is updated daily with the latest translation date from your Main CM, which form should you update?

system-parameters customer-options

Which three components must be administered during the implementation of a Branch Session Manager? (Choose three.)

Branch Session Manager Instance

Entity Link between Branch Session Manager and Survivable CM

Branch Session Manager Instance

Entity Link between Branch Session Manager and Survivable CM

Entity Link between Branch Session Manager and Main CM

Which Avaya product provides Centralized SIP Routing across the network?

Avaya Aura® Session Manager (SM)

Avaya Aura® Media Server (AAMS)

Avaya Aura® Session Manager (SM)

Avaya Aura® Communication Manager (CM)

Avaya Aura® System Manager (SMGR)

Avaya 7120X Practice Test 2 - Free Online Exam Prep & Questions

Which two Virtualization Models are supported by

Avaya? (Choose two.)

A.

Combined Application model

B.

Virtualization Platform Model

C.

Solution Module

D.

Appliance Model

E.

Virtualized Environment Model

Avaya 7120X Practice Test 2

Question

Avaya 7120X Practice Tests

Practice Tests