An engineering implementation team has been asked to install an ACP 4200.Which task related to the Avaya Orchestrator is completed during the installation by the implementation team?

Deploy the Rack and Device Dashboards.

Run the ACP Configuration Wizard.

Power on the Avaya Orchestrator virtual machine.

Which three examples of hardware equipment redundancy are built into the ACP 4200?(Choose three.)

Redundant iLO connections to each HP server.

Redundant hot swap switch CPU modules.

Redundant pairs of Power Distribution Units.

Redundant iLO connections to each HP server.

Redundant storage processors in the storage arrays.

Redundant hot swap switch CPU modules.

Redundant power supplies in all hardware components.

Redundant pairs of Power Distribution Units.

Which three are found in the E:\ ACP_SW_4.0 folder of the Management Server Console (MSC)?(Choose three.)

Firmware for Extreme Networks VSP Switches

Software and Patches for Avaya Orchestrator and Avaya Aura® applications

Software and Patches for VMware ESXi and vCenter

Firmware for Extreme Networks VSP Switches

Software and Patches for Avaya Orchestrator and Avaya Aura® applications

Installation files for the vCenter client application

Software and Patches for VMware ESXi and vCenter

A copy of the Lifecycle workbook

Which statement about the factory default configuration of the Avaya Session Border Controller for Enterprise (ASBCE) in ACP 4200 is true?

The A1 LAN interface of the SBC is connected to the Application 3 VLAN of the ACP 4200. B.The A1 LAN interface of the SBC is connected to the Application 1 VLAN of the ACP 4200.

The B1 LAN interface of the SBC is connected to the Application 2 VLAN of the ACP 4200.

The M1 LAN interface of the SBC is connected to the Application 3 VLAN of the ACP 4200.

A customer requires the Avaya Session Border Controller for Enterprise (ASBCE) be part of their ACP 4200 deployment.Which statement regarding an ASBCE High Availability configuration in ACP 4200 is true?

Only the VM deployment option is available for the ASBCE High Availability configuration in the on ACP 4200.

Only the Appliance deployment option is available for the ASBCE High Availability configuration in the ACP 4200.

The High Availability configuration consists of two Session Border Controllers (SBC) either in VM or appliance deployments.

The High Availability configuration consists of two Session Border Controllers (SBC) either In VM or appliance deployments, plus a Element Management System (EMS) VM.

Only the VM deployment option is available for the ASBCE High Availability configuration in the on ACP 4200.

What is the role of Avaya Aura® System Manager in an ACP 4200 4.0 system?

It manages the license for Avaya Orchestrator.

It provides a Single-Sign On functionality to Avaya Orchestrator.

It manages the license for Avaya Orchestrator.

It provides the application launch point for Avaya Orchestrator.

It is a component of the Avaya Aura® deployment.

Which statement about System Manager (SMGR) and ACP 4200 is true?

SMGR is a management tool for the Hardware Infrastructure within the ACP 4200.

SMGR is used to manage licensing, user account, and device credential management for Avaya Orchestrator.

SMGR is a management tool for the VM’s within the ACP 4200.

SMGR is a management tool for the Hardware Infrastructure within the ACP 4200.

SMGR is used to manage the Avaya Aura® Applications within the ACP 4200.

What is a benefit of using Virtual Router Redundancy Protocol (VRRP) on the VSP switches in the ACP 4200?

It allows the end systems to automatically change their gateway IP address in the event of a fall-over.

It creates virtual Layer 2 connections for the VMs.

It allows you to connect to the switches for management access.

It ensures the end systems do not need to change their gateway IP address in the event of a fail-over.

It allows the end systems to automatically change their gateway IP address in the event of a fall-over.

Refer to the exhibit. What is the purpose of the “SMRule” DRS rule that states the two Avaya Aura® Session Managers must run off different ESXi hosts?

To preserve seamless failover/recovery across primary and secondary Session Managers

To improve the latency of DRS load-balancing

To prevent a single ESXi host from being overloaded with SIP traffic

To preserve seamless failover/recovery across primary and secondary Session Managers

To reduce the memory and CPU load on a single ESXi host

Using VMware networking in ACP 4200, how are Virtual NICs mapped to physical NICs?

Via Virtual Switches and Port Groups

Which statement about all hosts in the cluster describes a system requirement for VMware vMotion in ACP 4200?

They must have matching CPU types.

They must be the same server type.

They must have matching Memory capacity.

They must have matching CPU types.

They must have matching VMware network settings.

Refer to the exhibit. Why is the usage measurement of CPU2 (in Purple) shown in the chart highlighted in the table?

Because the CPU2 has been selected in the table under the chart.

Because the CPU2 has been nominated as the primary CPU in this Virtual Machine.

Because the CPU2 has been highlighted with an active alarm.

Because the CPU2 usage is closest to the average usage of all the CPUs.

Because the CPU2 has been selected in the table under the chart.

Which two are valid levels of VMware performance monitoring?(Choose two.)

Visualization Performance and Fault Manager (VPFM)

Why does enabling VMware Enhanced vMotion Compatibility (EVC) prevent vMotion migrations from falling?

Because of incompatible CPUs across the cluster

Because of incompatible DRS rules across the cluster

Because of incompatible HA rules across the cluster

Because of insufficient memory across the cluster

Because of incompatible CPUs across the cluster

The customer's networking team is considering connectivity options to the ACP 4200.For which customers would an ACP 4200 Layer 2-only networking topology be deployed, and why?

Customers who wish to upgrade their Data Center to Fabric Connect. The ACP will use Fabric Extend to integrate with the customer's Data Center switches.

Customers who have a Layer 2 Data Center. The ACP will provide Layer 3 routing for the customer.

Customers who wish to retain existing VLANs, subnets, and IP subnets. The ACP will extend VLANs out to the Data Center routers which will provide Layer 3 routing.

Customers who do not use Dynamic routing protocols. The ACP will use static routes for connectivity to the Data Center.

Customers who wish to upgrade their Data Center to Fabric Connect. The ACP will use Fabric Extend to integrate with the customer's Data Center switches.

When a Layer 2-only networking topology is deployed, what is the behavior of the ACP 4200?

It will extend VLANs out to the Data Center routers which will provide Layer 3 routing.

It will support only a single management VLAN.

It will extend VLANs out to the Data Center routers which will provide Layer 3 routing.

It will support only a single application VLAN.

It will have 802.1Q tagging enabled on all ports of the VSP switches.

Refer to the exhibit. What does the IP address 10.1.1.1 represent?

The VRRP IP address of the two VSP 7200 switches

The IP address of the EMC storage

The SMLT IP address of the two VSP 7200 switches

The Virtual IST IP address of the two VSP 7200 switches

The VRRP IP address of the two VSP 7200 switches

Which statement describes a feature of VMware HA?

It detects host failures and starts applications on other hosts in the cluster.

It adds VPFM as a SNMP management server.

It detects host failures and starts applications on other hosts in the cluster.

It monitors the memory and CPU load on the host servers and balances them by moving VMs between the hosts.

It moves a running VM from one host to another.

Avaya 75940X Practice Test 2 - Free Online Exam Prep & Questions

Which application can a technician use to remotely connect to the Management Server Console on an ACP 4200?

Become a Premium Member for full access

Unlock Premium Member

Avaya 75940X Practice Test 2

Question

Avaya 75940X Practice Tests

Practice Tests