ExamGecko
Home Home / Avaya / 76940X

Avaya 76940X Practice Test - Questions Answers

Question list
Search
Search

List of questions

Search

A support engineer is tasked with working on an ACP 4200 4.0 system.

Which three pieces of equipment would the engineer expect to find in the rack that will differentiate the system from an earlier release of PodFx 3.X or CPOD 2.X? (Choose three.)

A.
Dell R601 Servers
A.
Dell R601 Servers
Answers
B.
VSP 4824
B.
VSP 4824
Answers
C.
HP Nimble Storage CS1000
C.
HP Nimble Storage CS1000
Answers
D.
HP Proliant DL360 G10 Servers
D.
HP Proliant DL360 G10 Servers
Answers
E.
VSP 7254
E.
VSP 7254
Answers
Suggested answer: B, C, D

Which equipment is standard in a new ACP 4200 4.0?

A.
IP 7254
A.
IP 7254
Answers
B.
VSP 4850C. IP 8284
B.
VSP 4850C. IP 8284
Answers
C.
VSP 7024
C.
VSP 7024
Answers
Suggested answer: B

Explanation:

Reference: https://downloads.avaya.com/css/P8/documents/101054952

Which benefit does the available G450 Gateway provide to the ACP 4200 solution?

A.
IP to H.323 translation
A.
IP to H.323 translation
Answers
B.
SIP to IP transition
B.
SIP to IP transition
Answers
C.
IP to POTS transition
C.
IP to POTS transition
Answers
D.
SIP to SIP negotiation
D.
SIP to SIP negotiation
Answers
Suggested answer: B

A support engineer is assigned to provide maintenance services for an ACP 4200 4.0 system.

Which type of organization could the engineer expect to be assigned to?

A.
Small Business services
A.
Small Business services
Answers
B.
Service Providers
B.
Service Providers
Answers
C.
Large Enterprises
C.
Large Enterprises
Answers
D.
Large Enterprises & Service Providers
D.
Large Enterprises & Service Providers
Answers
Suggested answer: C

To get a visualization of the hardware components, and their positions in the ACP 4200 rack, which management application can an engineer use?

A.
MSC
A.
MSC
Answers
B.
Orchestrator
B.
Orchestrator
Answers
C.
vCenter Client in Flash modeD. vCenter Client in HTML5 mode:
C.
vCenter Client in Flash modeD. vCenter Client in HTML5 mode:
Answers
Suggested answer: B

Explanation:

Reference: https://downloads.avaya.com/css/P8/documents/101054946 (11)

A support engineer logs into the System Manager (SMGR) application on an ACP 4.0 system with the intention of checking VPFM warning messages for the VSP switch. The engineer is unable to see the VPFM link in SMGR.

What could be causing this Problem?

A.
The VPFM link was removed from SMGR as part of the upgrade of the system to ACP 4.0.
A.
The VPFM link was removed from SMGR as part of the upgrade of the system to ACP 4.0.
Answers
B.
The engineer's SMGR account has insufficient access privileges to launch VPFM.
B.
The engineer's SMGR account has insufficient access privileges to launch VPFM.
Answers
C.
The VPFM link has been renamed as Orchestrator in ACP 4.0.
C.
The VPFM link has been renamed as Orchestrator in ACP 4.0.
Answers
D.
The engineer should connect to VPFM directly and not through SMGR.
D.
The engineer should connect to VPFM directly and not through SMGR.
Answers
Suggested answer: B

A support engineer is tasked to power down a VSP switch using the management tools available for the ACP 4200.

Which statement is true about how the engineer would accomplish this task?

A.
Login to Enterprise Device Manager and use the chassis power down option.
A.
Login to Enterprise Device Manager and use the chassis power down option.
Answers
B.
Login to Servertech PDU Web Interface and use the outlet control option.
B.
Login to Servertech PDU Web Interface and use the outlet control option.
Answers
C.
This can only be done if the engineer is on-site to switch off the VSP’s power switch.
C.
This can only be done if the engineer is on-site to switch off the VSP’s power switch.
Answers
D.
This can only be done if the engineer is on-site to remove the VSP’s power cable.
D.
This can only be done if the engineer is on-site to remove the VSP’s power cable.
Answers
Suggested answer: A

What is the primary purpose or function of Enterprise Device Manager (EDM)?

A.
EDM provides an interface for administrator to monitor the health of the Nimble Storage array in a single pane and allows them to make changes to storage, protection, access, and performance configuration.
A.
EDM provides an interface for administrator to monitor the health of the Nimble Storage array in a single pane and allows them to make changes to storage, protection, access, and performance configuration.
Answers
B.
EDM provides access to HP Proliant Servers’ out-of-band management facilities. It allows for control and monitoring of HP servers.
B.
EDM provides access to HP Proliant Servers’ out-of-band management facilities. It allows for control and monitoring of HP servers.
Answers
C.
EDM is the device management software application for Extreme Network's VSP platforms.
C.
EDM is the device management software application for Extreme Network's VSP platforms.
Answers
D.
EDM provides a robust web interface which allows for monitoring of the ServerTech PDU and control of its individual power outlet.
D.
EDM provides a robust web interface which allows for monitoring of the ServerTech PDU and control of its individual power outlet.
Answers
Suggested answer: C

To use the Management Server Console (MSC) as their time source, how would the engineer configure the ESXi hosts?

A.
Login to the MSC, run the time _configuration.bat script.
A.
Login to the MSC, run the time _configuration.bat script.
Answers
B.
Login to the MSC, set Services > Time configuration > NTP Clients = IP addresses of the ESXi hosts.
B.
Login to the MSC, set Services > Time configuration > NTP Clients = IP addresses of the ESXi hosts.
Answers
C.
Login to the ESXi Hosts using the CLI, run the time_configuration.sh script.
C.
Login to the ESXi Hosts using the CLI, run the time_configuration.sh script.
Answers
D.
Login to vCenter server using the Web UI, set host > manage > Time configuration = IP address of the MSC.
D.
Login to vCenter server using the Web UI, set host > manage > Time configuration = IP address of the MSC.
Answers
Suggested answer: B

Explanation:

Reference: https://downloads.avaya.com/css/P8/documents/101054946 (90)

A support engineer is experiencing some difficulty correlating the error messages and logs from different systems in the ACP 4200.

What should the engineer do to fix this problem?

A.
Use the VMware integrated time server to supply time to all systems.
A.
Use the VMware integrated time server to supply time to all systems.
Answers
B.
Manually synchronize the time on all the ACP systems to a correct vCenter.
B.
Manually synchronize the time on all the ACP systems to a correct vCenter.
Answers
C.
Use the MSC NTP service tied to external NTP time servers to synchronize the time on all systems.
C.
Use the MSC NTP service tied to external NTP time servers to synchronize the time on all systems.
Answers
D.
The VSP switches have NTP servers built into them, and all other systems can use NTP to synchronize to them.
D.
The VSP switches have NTP servers built into them, and all other systems can use NTP to synchronize to them.
Answers
Suggested answer: B
Total 56 questions
Go to page: of 6