LAB 1You plan to deploy a firewall to subnetl-2. The firewall will have an IP address of 10.1.2.4.You need to ensure that traffic from subnetl-1 to the IP address range of 192.168.10.0/24 is routed through the firewall that will be deployed to subnetl-2. The solution must be achieved without using dynamic routing protocols.

See the Explanation below for step by step instructions

LAB 2You need to create an Azure Firewall instance named FW1 that meets the following requirements:* Has an IP address from the address range of 10.1.255.0/24* Uses a new Premium firewall policy named FW-pohcy1* Routes traffic directly to the internet

See the Explanation below for step by step instructions

LAB 3You plan to implement an Azure application gateway in the East US Azure region. The application gateway will have Web Application Firewall (WAF) enabled.You need to create a policy that can be linked to the planned application gateway. The policy must block connections from IP addresses in the 131.107.150.0/24 range. You do NOT need to provision the application gateway to complete this task.

See the Explanation below for step by step instructions

LAB 4You need to ensure that connections to the storage34280945 storage account can be made by using an IP address in the 10.1.1.0/24 range and the name storage34280945.pnvatelinlcblob.core.windows.net.

See the Explanation below for step by step instructions

LAB 5You need to ensure that requests for wwwjelecloud.com from any of your Azure virtual networks resolve to frontdoor1.azurefd.net.

See the Explanation below for step by step instructions

LAB 6You need to ensure that all hosts deployed to subnet3-2 connect to the internet by using the same static public IP address. The solution must minimize administrative effort when adding hosts to the subnet.

See the Explanation below for step by step instructions

LAB 7You need to ensure that hosts on VNET2 can access hosts on both VNET1 and VNET3. The solution must prevent hosts on VNET1 and VNET3 from communicating through VNET2.

See the Explanation below for step by step instructions

LAB 8You need to ensure that the storage34280945 storage account will only accept connections from hosts on VNET1

See the Explanation below for step by step instructions

LAB 9You need to ensure that subnet4-3 can accommodate 507 hosts.

See the Explanation below for step by step instructions

LAB 10You need to configure VNET1 to log all events and metrics. The solution must ensure that you can query the events and metrics directly from the Azure portal by using KQL.

See the Explanation below for step by step instructions

LAB 11You are preparing to connect your on-premises network to VNET4 by using a Site-to-Site VPN. The on-premises endpoint of the VPN will be created on a firewall named Firewall 1.The on-premises network has the following configurations:* Internal address range: 10.10.0.0/16.* Firewall 1 internal IP address: 10.10.1.1.* Firewall1 public IP address: 131.107.50.60.BGP is NOT used.You need to create the object that will provide the IP addressing configuration of the on-premises network to the Site-to-Site VPN. You do NOT need to create a virtual network gateway to complete this task.

See the Explanation below for step by step instructions

You have an Azure subscription that contains a virtual network named VNet1. VNet1 contains a subnet named Subnet1You deploy an instance of Azure Application Gateway v2 named AppGw1 to Subnet1. You create a network security group (NSG) named NSG1 and link NSG1 to Subnet1.You need to ensure that AppGw1 will only load balance traffic that originates from VNet1. The solution must minimize the impact on the functionality of AppGw1.What should you add to NSG1?

an inbound rule that has a priority of 4096 and blocks all internet traffic

an outbound rule that has a priority 100 and blocks all internet traffic

an outbound rule that has a priority of 4096 and blocks all internet traffic

an inbound rule that has a priority of 4096 and blocks all internet traffic

an inbound rule that has a priority of 100 and blocks all internet traffic

You have an Azure subscription that contains an Azure Front Door named FD1. FD1 is configured as shown in the following exhibit. You need to enable Azure Private Link for FD1.What should you do first?

Change Pricing Tier to Azure Front Door Premium.

You have an Azure Private Link service named PL1 that uses an Azure load balancer named LB1. You need to ensure that PL1 can support a higher volume of outbound traffic. What should you do?

Increase the number of NAT IP addresses assigned to PL1.

Redeploy LB1 with a different SKU.

Increase the number of NAT IP addresses assigned to PL1.

Deploy an Azure Application Gateway v2 instance to the source NAT subnet.

Increase the number of frontend IP configurations for LB1.

Microsoft AZ-700 Practice Test 5 - Free Online Exam Prep & Questions

DRAG DROP

You have an Azure subscription that contains the resources shown in the following table.

Microsoft AZ-700 image Question 147 88003 10022024015514000000

You need to associate Gateway 1 with Subnet1. The solution must minimize downtime on VM1.

Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Become a Premium Member for full access

Unlock Premium Member

Microsoft AZ-700 Practice Test 5

Question

Microsoft AZ-700 Practice Tests

Practice Tests