What is Dell's recommendation for scheduling FAST VP relocation?

Before backups or nightly batch processing

During backups or nightly batch processing

After backups or nightly batch processing

Before and After backups or nightly batch processing

An architect is designing a cost-effective PowerStore solution in sizer that is expected to perform in the event of a node failure without impacting the max performance. What must be considered?

Set Max Performance Saturation to 50% while sizing.

Plan and design a disaster recovery site.

Set Performance Growth to 50% while sizing.

Provide a higher model than the sizer-recommended solution.

A technical architect is helping a customer prepare for a data center maintenance window. All applications must failover to the disaster recovery site. The customer also wants to test their disaster recovery plan. What PowerStore Manager replication option should be used to address the customer's need, and from which site should the option be run?

Planned failover from source site

Planned failover from target site

Planned failover from source site

How are SAS ports used by Dell Unity XT storage processors?

To move data to and from the backend drives.

To move data between the data array.

What is a Dell recommendation when connecting ESXi hosts to PowerStore?

Disable DelayedACK when configured using iSCSI.

Use the default 32k host I/O size when using VMware NFS Datastores.

Configure a minimum of two NAS servers when using vVol Datastores.

Configure Round Robin Multipathing with an IOPS limit of 1024.

Disable DelayedACK when configured using iSCSI.

What details are covered in My Work Environmental Reports?

Switch configuration and Host configuration

Interoperability and Migrations readiness

Non-Dell product configurations

Switch configuration and VPLEX configuration

Switch configuration and Host configuration

A customer has a data center with 30 different applications running on 30 volumes presented from PowerStore. They want to design a DR site within 300 km with 15 min RPO using storage-based asynchronous replication. Which protection policy design leads to most stable storage performance?

Create a single protection policy assigned to 30 volumes, each scheduled with a five minute shift from each other.

Create 15 protection policies that are assigned to a pair of volumes, each scheduled with a one minute shift from each other.

Create two protection policies that are assigned to 15 volumes, each scheduled with a five minute shift from each other.

Create a single protection policy assigned to 30 volumes, each scheduled with a five minute shift from each other.

Create 30 protection policies that are assigned to a single volume, each scheduled with a one minute shift from each other.

Which parameters can be defined when sizing a Dell Unity XT solution using the Simple Performance method?

Write size (KB) Initial capacity (TB)

Application workload type Yearly growth rate (%)

Which statement is true about dynamic node affinity?

Maintains relatively consistent utilization, latency, and performance between both nodes.

Automatically moves NAS servers to the peer node to balance the workload.

Trespass affected block volumes between nodes.

What is a Dell Unity XT best practice to provide the highest network availability for NAS?

Configure LACP with multiple active links.

Configure Fail-Safe Networking with a primary link and a standby link.

Combine LACP and Fail-Safe Networking.

Utilize multi-pathing software such as PowerPath.

Which two statements are correct in reference to an NVMe Expansion Enclosure attached to a PowerStore? (Select 2)

Slots for 25 2.5-inch NVMe drives

Supports the use of NVMe SCM Drives

Slots for 25 2.5-inch NVMe drives

Requires v2 embedded module in base enclosure

Not supported on systems that include SAS expansion enclosures

Supports the use of NVMe SCM Drives

A systems administrator has deployed a Dell Unity XT 380F system with 15x 1.92 TB SSD drives, in a RAID 5 dynamic pool. Shortly after deployment, the administrator wants to expand the capacity of the system and use larger drives to increase the density. What will happen if the administrator adds 4x 3.84 TB SSD drives?

The full capacity of the drives will be available.

Only half of the capacity of the new drives will be available.

Three of the drives will be added with a fourth reserved as spare.

The mixing of drive types is not supported, and the operation will fail.

Non-uniform distribution of I/O over storage capacity

Uniform distribution of I/O over storage capacity

Non-uniform distribution of I/O over storage capacity

What action is performed in the 'Create a file import session' during a PowerStore file import?

Options for import are specified.

Destination NAS server resources are created.

Production interfaces are disabled on the source side.

Options for import are specified.

Source import network interface is created.

DELL D-MSS-DS-23 Practice Test 2 - Free Online Exam Questions 41-80

Which two workload parameters are required to proceed with sizing for a PowerStore solution? (Select 2)

Become a Premium Member for full access

Unlock Premium Member

DELL D-MSS-DS-23 Practice Test 2

Question

DELL D-MSS-DS-23 Practice Tests

Practice Tests