DELL D-OME-OE-A-24 Practice Test - Questions Answers, Page 3

To meet the storage administrator's requirement for the WWPN (World Wide Port Name) for servers that are in transit, the best approach is to create a profile in advance for each server and assign it once the server is discovered. This method aligns with the use of Virtual Identities on the SAN, which allows for flexibility in case a server needs to be replaced.

Here's how this can be accomplished:

Create Virtual Identity Profiles: Before the servers arrive, create a Virtual Identity profile for each server within the management software that handles SAN configurations.

Assign WWPNs: Within each profile, assign a unique WWPN that will be used by the server's Fibre Channel ports when connecting to the SAN.

Deploy Servers: Once the servers are deployed and discovered by the management system, the pre-created profiles can be assigned to them.

Activate Profiles: Activating the profiles will apply the Virtual Identities, including the WWPNs, to the servers, allowing them to be identified on the SAN.

This proactive approach ensures that the WWPNs are ready to be used as soon as the servers are online, facilitating a smooth integration into the SAN environment. It also adheres to company policy regarding the use of Virtual Identities, providing a seamless process for replacing servers if necessary1.

For more information on managing WWPNs and Virtual Identities in a SAN environment, administrators can refer to documentation and best practices provided by the SAN management software vendors1.

A supported feature of OpenManage Enterprise is:

A . Monitor Dell EMC network devices1.

OpenManage Enterprise provides a comprehensive view of Dell servers, chassis, storage, and network switches, allowing for device discovery, monitoring, and management within the enterprise network1. It is designed to unify and automate IT processes for greater efficiency across a variety of form factors1.

Go to the IP Addresses page.

Select Discovery.

Enter the admin credentials.

Select the target device.

Select Onboarding.

For a Hyper-V deployment of OpenManage Enterprise managing a large number of devices, ensuring adequate resources is crucial for optimal performance. One troubleshooting step to consider is to ensure that a minimum of eight virtual processors are allocated to the OpenManage Enterprise virtual appliance.

Here's why this is important:

Virtual Processors: The number of virtual processors (vCPUs) assigned to a virtual machine (VM) directly affects its ability to handle concurrent tasks. OpenManage Enterprise, when managing thousands of devices, requires sufficient processing power to maintain smooth operation of the UI and backend processes.

Performance: If users are experiencing poor performance, it could be due to the VM not having enough vCPUs to efficiently process the workload. Allocating at least eight vCPUs can provide the necessary computational power to improve UI responsiveness and overall system performance1.

It's also recommended to review the overall resource allocation, including memory and storage, to ensure they meet the requirements for the scale of the deployment. For detailed specifications and performance optimization tips, refer to the official Dell OpenManage Enterprise support resources1.

=========================

Access the Text User Interface.

Accept the EULA.

Set network parameters to the IP of the appliance.

Change the password of the appliance.

The maximum number of static network routes that can be configured in a single-homed OpenManage Enterprise appliance is:

C . 201.

This limitation is specified in the documentation for OpenManage Enterprise, ensuring that administrators are aware of the routing capabilities and limitations when configuring network settings for the appliance1.

The most likely cause for the PER740_V1 template not appearing in the list of available templates when creating a baseline in OpenManage Enterprise is that the PER740_V1 compliance template has not been imported into the system.

Here's a detailed explanation:

Template Availability: For a deployment template to be used for baseline compliance, it must first be imported into OpenManage Enterprise.

Compliance Feature: The Baseline Compliance feature compares the current firmware and settings of servers against a known good baseline (the template) to determine compliance.

Import Process: If the template is not listed, it suggests that the import process was not completed or the template was not designated as a compliance template within the system.

Checking Import Status: Administrators can verify whether a template has been imported by checking the template management section within OpenManage Enterprise.

It's important to note that while other options might seem plausible, they typically would not prevent a template from being listed. For example:

Option A: Even if a template is assigned to a compliance job, it should still appear in the list of available templates.

Option B: Read-only attributes would not affect the listing of the template.

Option C: Systems being already compliant does not remove the template from the list; it would simply show that the systems are compliant with that template.

Therefore, the correct answer is D. PER740_V1 compliance template has not been imported, which aligns with the standard procedures for managing deployment templates and baseline compliance within Dell OpenManage Enterprise1. It is recommended to check the import status and ensure that the template is correctly set up as a compliance template in the system.

The minimum warranty level required for the SupportAssist adapter to effectively monitor the hardware status of a managed server is ProSupport Plus. This level of service provides the most comprehensive support features, including proactive and predictive support capabilities that are essential for hardware monitoring.

Here's the rationale for this answer:

ProSupport Plus: This is the highest level of service offered by Dell, providing 24x7 priority access to ProSupport engineers, repairs for accidental damages, and proactive monitoring with SupportAssist technology1.

SupportAssist Technology: SupportAssist is a proactive monitoring tool that automatically detects hardware and software issues. It requires an active ProSupport or ProSupport Plus warranty to utilize all its features2.

Hardware Monitoring: With ProSupport Plus, SupportAssist can perform detailed hardware monitoring, send alerts, and even initiate automatic case creation for issues3.

While SupportAssist can still function with other warranty levels, ProSupport Plus ensures the full utilization of its capabilities, especially for critical hardware status monitoring and automated support case generation. It's important to have the appropriate level of warranty to ensure that servers are monitored effectively and support is provided promptly when issues are detected.