Which systems support the FS25 enclosure?

DD9800, DD9900, and DD6900 (HA Only)

DD6900 (HA Only), DD9400 (HA Only), and DD9900 (HA Only)

What rule must be followed during an upgrade procedure with the FS25 expansion shelf?

FS25 shelf is cabled on a separate private chain

If ES40 SAS shelves are on the same chain as an FS25, the maximum number of shelves on that chain is five

FS25 shelf must be on the same chain with DS60

For high performance, the connections from a controller to FS25 shelves must be over FC cables

FS25 shelf is cabled on a separate private chain

Which fabric zoning configuration is recommended by Dell Technologies for implementing a DD VTL?

Single initiator; single target

Multiple initiators; single target

Single initiator; multiple targets

Multiple initiators; multiple targets

Single initiator; single target

An administrator is migrating their old cloud tier-enabled Data Domain to a new PowerProtect DD appliance with cloud tier. During migration, the administrator recognizes that file system cleaning on the source system is not possible. What is the most likely cause of this behavior?

Source system is running in restricted mode

Migration will restrict all activities on both systems

Source system is running in restricted mode

Filesystem is disabled on the source system

Migration will restrict all activities on the source system

What is a characteristic of Dell Cloud Tier?

Managed through a single namespace.

NFS, HTTPS, and CIFS are supported for data movement.

The VTL vault cannot be stored in cloud tier storage.

Managed through a single namespace.

Scales to the maximum capacity of the active tier.

What is a use case of BoostFS?

To protect applications that do not support DD Boost

To increase DD Boost throughput

To enable snapshot on DD Boost data

To protect applications that do not support DD Boost

To implement DD Boost over Fibre Channel

A PowerProtect DD administrator wants to enable encryption on one of two existing cloud units. Which statement is true regarding the encryption?

Once data is in the cloud, you cannot change the encryption status

Cloud tier encryption is provided only by the cloud storage

Encryption can be enabled on each cloud unit individually

Encryption license is not required to enable cloud tier encryption

Active tier encryption is required to enable encryption on the cloud tier

Once data is in the cloud, you cannot change the encryption status

Which condition exists for a backup infrastructure based on PowerProtect DD?

Backup clients can write data directly to the PowerProtect DD appliance.

Compressed files must be decompressed before being sent to PowerProtect DD.

Backup clients can write data directly to the PowerProtect DD appliance.

VTL can be used to move physical tapes to a DR location.

SIMULATIONTask4An administrator needs to create a new non-admin user and a storage unit for their Oracle 'abc123'department.Use the simulator to:- Create a new user: 'DDBoostOracle' withpassword: Password123, management role: none,with Password Aging Policy: Minimum Days: 0,Maximum Days: 180, Warn Days: 15 days- Assign the user to the ddboost users.- Create a new storage unit called: SU_Oracle and assign new user to the storage unit.

See the solution in the explanation below

SIMULATIONTask 5Use the simulator to configure a new MTree with a path of /data/col1/oracle. TheMTree size must not be allowed to exceed 200 TiB.When you have finished, continue to the next question.

See the solution in the explanation below

SIMULATIONTask 6A backup administrator finished installing a PowerProtect DD3300. After the installation, they notice disk 1.5 is offline after running the disk fail command in theDDOS CLI.Using the simulator, flash an LED on the hard drive with the issue and return it to operation.When you have finished, continue to the next question.

See the solution in the explanation below

Which are two attributes of PowerProtect DD High Availability? (Select 2)

A single set of shared storage is used.

It is supported only on DD9900 systems.

PowerProtect DD nodes are configured in active/active mode.

A single set of shared storage is used.

PowerProtect DD nodes should have dual heads.

It is supported only on DD9900 systems.

What is the correct practice when creating Fibre Channel zones between PowerProtect DD and the media server?

single-initiator single-target zoning

single-initiator dual-target zoning

dual-initiator dual-target zoning

single-initiator single-target zoning

dual-initiator single-target zoning

What command is used to make a storage unit?

ddboost storage-unit create <storage_unit>

With DSP enabled on a PowerProtect DD appliance, which functions are performed on the backup host?

Segmenting, fingerprinting, and sending the fingerprints

Recording references to previous data and segmenting

Sending the data, segmenting, and compressing

Compressing, segmenting, and fingerprinting

Segmenting, fingerprinting, and sending the fingerprints

A customer's PowerProtect DD system is full. No data can be written or deleted from the system. Which two actions can the customer take to make capacity available on the system? (Select 2)

Remove core and autosupport files.

Which best practice should be followed when implementing a PowerProtect DD VTL?

Limit the number of tapes to the number needed and eventually expand.

Use multiplexing to optimize deduplication in virtual tapes.

Limit the number of tapes to the number needed and eventually expand.

Use fewer higher-capacity tapes rather than more lower-capacity tapes for space reuse.

Limit ISL links to four hops between the storage node and the PowerProtect DD.

SIMULATIONTaskUse the simulator to schedule PowerProtect DD space reclamation to occur every Monday at 4:00AM without impacting system resources for more than 25%.When you have finished, continue to the next question.

See the solution in the explanation below

DELL D-PDD-DY-23 Practice Test 1 - Free Online Exam Prep & Questions

DRAG DROP

Put the steps in correct order to create a mount on a backup server and copy a test file to a PowerProtect DD appliance over NFS.

DELL D-PDD-DY-23 image Question 1 5682740 11012024014528000

Correct answer:

DELL D-PDD-DY-23 image answer Question 1 5682740 11012024014528000

Comment (0)

Explanation:

Create the NFS directory (mount point).

Create a backup directory on the backup server.

Mount the PowerProtect DD directory or MTree on the new mount point.

Create and copy a file from the backup server to the PowerProtect DD appliance to validate functionality.

asked 01/11/2024

Miguel Villanueva

36 questions

DELL D-PDD-DY-23 Practice Test 1

Question

DELL D-PDD-DY-23 Practice Tests

Practice Tests