What needs to be configured before the VxRail Market can be accessed via the VxRail Plugin?

An active Dell Technologies support account must be linked to VxRail Manager

Connectivity through Secure Connect Gateway must be enabled.

The deployment must be joined to the VMware Customer Experience Improvement Program

VxRail Cluster Health Monitoring must be enabled for all clusters

SIMULATIONTaskAn administrator is working with the VxRail Dell Support team and as part of the troubleshooting, the admin has been instructed to temporarily remove the node with a serial number of 'V0730040000000' from the cluster.User credentials are Username of'administrator@vsphere.local'Password 'VMw@r3!123'.Using the simulator, identify the correct node and remove it from the cluster.

See the step by step solution in the Explanation below

SIMULATIONDuring a maintenance task on a VxRail Appliance, the system LED on vcluster730-esx03.edu.local is required to be enabled so the node can be correctly identified in the physical rack.Use the simulator to enable the System LED for the node.

See the step by step solution in the Explanation below

An environment has two VxRail clusters In vCenter there is only one vSphere Distributed Switch object for both clusters Which deployment architecture was used for these clusters?

External vCenter Server with external DNS

External vCenter Server with internal DNS

Internal vCenter Server with external DNS

Internal vCenter Server with internal DNS

When the VxRail cluster is deployed, what vSAN storage policy settings are applied to the VxRail Manager VIVP

Failures to Tolerate: 1 failure - RAID 1 (Mirroring) Object space reservation: Thin provisioning

Failures to Tolerate: 1 failure - RAID 5 (Erasure Coding) Object space reservation. Thin provisioning

Failures to Tolerate: 1 failure - RAID 5 (Erasure Coding) Object space reservation Thick provisioning

Failures to Tolerate: 1 failure - RAID 1 (Mirroring) Object space reservation. Thick provisioning

An administrator must shut down a VxRail cluster However the validation process has failed and cannot be completedWhat action must be taken to correct the issue?

Turn oft cluster health monitoring

Put all nodes are in maintenance mode.

Disconnect all nodes from external storage

An administrator wants to get information about a specific host and runs this code:GET/v1/hosts/{sn}An API code 404 is returnedWhat is the reason for the error code?

The provided {sn} was not valid

The administrator was not authenticated

The provided {sn} was not valid

The API is designed to return all hosts in a cluster

Which command is used to unlock the mystic account on the VxRail Manager VM?

pam_tally2 --user=mystic --reset

What is the default load-balancing policy for VxRail Port Groups for a system deployed with a predefined network profile1?

Route based on originating virtual port.

Route based on physical NIC load

Route based on originating virtual port.

VxRail nodes have been purchased to add additional capacity The new nodes are based on AMD Chipset, the current cluster is based on Intel ChipsetWhat should be the next step?

Enable VMware EVC Mode and then add the new nodes.

A Add the new nodes to the existing cluster

Enable VMware EVC Mode and then add the new nodes.

Create an additional Cluster with the new nodes

What is a consideration when scaling a VxRail cluster?

Mixing VxRail nodes with different base network speeds is not permitted

A Mixing of all-flash and NVMe nodes is not allowed

A maximum of 10 nodes is supported when 1 Gbps networking is used.

Mixing VxRail nodes with different base network speeds is not permitted

The first two nodes in a standard cluster must be identical.

A VxRail Cluster has been deployed with four VxRail E560 nodes each using tour integrated NIC ports and the default network profile.Which vmnics carry the VxRail management traffic, and in what teaming and failover configuration?

vmnic0 and vmnid actrve/standby pair with no link aggregation

vmnic0 and vmnid active/active pair with link aggregation

vmnict and vmnic2 active/standby pair with link aggregation

vmnic0 and vmnid actrve/standby pair with no link aggregation

vmnic0 and vmnic3 active/active pair with no link aggregation

Using the VxRail plug-in. where can iDRAC settings be configured?

Host > Configure > VxRail > iDRAC Configuration

Cluster > Configure > VxRail > iDRAC Configuration

Host > Configure > Hardware > iDRAC Configuration

Cluster > Configure > VxRail > Networking

Host > Configure > VxRail > iDRAC Configuration

What is a benefit when using VCF on VxRail architectures'?

Automation of full stack lifecycle management

Minimizes the risk from new deployments and operations

Automation of full stack lifecycle management

Optimized infrastructure performance

Simplified deployment and lifecycle management

What is required to setup vSAN HCI Mesh?

Latency of 10 milliseconds and bandwidth of 10 Gbps

Latency of 5 milliseconds and network redundancy

vSAN Enterprise License and 1 Gbps Networking

Latency of 10 milliseconds and bandwidth of 10 Gbps

vSAN Advanced License and bandwidth of 25 Gbps

Which three data protection options are included with VxRail? (Select 3)

Data Protection Suite for VMware

Which VxRail networks support link aggregation1?

Private Management and VxRail Management

An administrator needs to place a node in maintenance mode They want to ensure vSAN does not start rebuilding absent components during the time it takes for maintenance to be completedWhat would allow the administrator to achieve this?

Increase vSAN Object repair timer

Temporarily disable components ^synchronization.

Temporarily set FTT=0 in vSAN Storage Policy.

Increase vSAN Object repair timer

Increase durability component lifetime.

DELL D-VXR-OE-23 Practice Test 1 - Free Online Exam Prep & Questions

Where are the VxRail Manager backup files located after they are created?

Local Datastore

vSAN Datastore

VxRail Manager VM Backup Folder

Comment (0)

DELL D-VXR-OE-23 Practice Test 1

Question

DELL D-VXR-OE-23 Practice Tests

Practice Tests