An administrator needs to create a custom role in vCenter Server that is part of VMware Cloud Foundation environment to grant specific privileges to a group of users.Which two actions should be taken to create this custom role? (Choose two.)

Choose the privileges required for the custom role.

Navigate to the Roles section in the vSphere Client.

Choose the privileges required for the custom role.

Navigate to the Roles section in the vSphere Client.

Apply the custom role to the root of the vCenter Server inventor.

Assign permissions to the custom role before adding privileges.

Clone an existing role in SDDC Manager to create the custom role.

While deploying a new VMware Cloud Foundation environment, a cloud administrator validates the information entered into the Deployment Parameter Workbook. The validation action results in an error and the VMware Cloud Builder GUI error message does not identify the cause.Which logfile can the administrator use to identify the cause of the validation error?

VMware Cloud Builder appliance - vcf-deployment-debug.log

VMware SDDC Manager appliance - vcf-deployment-debug.log

VMware Cloud Builder appliance - vcf-bringup-debug.log

VMware SDDC Manager appliance - vcf-bringup-debug.log

VMware Cloud Builder appliance - vcf-deployment-debug.log

While preparing to enable Application Virtual Networks (AVNs) and deploying Aria Suite components, an administrator plans to deploy an NSX Edge cluster.What is a requirement for deploying the NSX Edge cluster?

The Edge cluster must be deployed in the management domain.

The Edge transport nodes must be configured with an MTU of 1500.

The Edge cluster must be deployed in the management domain.

The Edge transport nodes must be deployed using the 'large' form factor.

The Edge cluster must be configured for NSX Federation.

An administrator is tasked with performing password rotation for VMware Cloud Foundation components managed by SDDC Manager.Which action must be taken to complete this task?

Access the SDDC Manager UI and navigate to the password management section.

Use the Async Patch CLI Tool to rotate passwords for all components.

Schedule a maintenance window to rotate the passwords to minimize disruption.

Manually update the passwords in vCenter Server and NSX Manager.

Access the SDDC Manager UI and navigate to the password management section.

An organization is planning to manage a diverse set of databases across multiple VMware Cloud Foundation environments.Which three capabilities of Data Services Manager would help in managing these databases efficiently? (Choose three.)

Centralized monitoring and alerting for all managed databases.

Policy-based backup and recovery for databases.

Automated database provisioning and deployment.

Centralized monitoring and alerting for all managed databases.

Policy-based backup and recovery for databases.

Automated VM migration between on-premises and cloud environments.

Automated database provisioning and deployment.

Integration with vSAN for optimized storage management

As part of the preparation for deploying VMware Aria Suite Lifecycle, an administrator needs to create Application Virtual Networks (AVNs).Which three steps are necessary to complete the configuration of AVNs? (Choose three.)

Configure the AVNs in the NSX Manager.

Assign AVNs to specific ESXi hosts.

Define the IP address ranges for the AVNs.

Setup routing policies for AVNs.

Configure the AVNs in the NSX Manager.

Assign AVNs to specific ESXi hosts.

Enable AVNs in the vCenter Server.

Define the IP address ranges for the AVNs.

An administrator is preparing to deploy VMware Aria Suite Lifecycle using SDDC Manager.Which three are prerequisites for deploying Aria Suite Lifecycle? (Choose three.)

Ensure that a custom SSL certificate specifying the FQDN of the appliance is available.

Ensure that the NTP and DNS settings specified in SDDC Manager are valid for all management components.

Ensure the VMware Software Install Bundle for VMware Aria Suite Lifecycle is in the local bundle repository.

Ensure that a custom SSL certificate specifying the FQDN of the appliance is available.

Ensure that the NTP and DNS settings specified in SDDC Manager are valid for all management components.

Verify that the password for the admin(g>local user account meets the complexity requirements.

Ensure that the Application Virtual Networks have been configured.

Ensure the VMware Software Install Bundle for VMware Aria Suite Lifecycle is in the local bundle repository.

A Cloud Administrator has been tasked with verifying all of the prerequisites are in place prior to deploying VMware Aria Suite Lifecycle. The following information has been provided for the Aria Suite Lifecycle implementation:hostname: lcmdomain: vcf.company.comIP address: 10.0.0.150/24IP gateway: 10.0.0.1Which two items must the Cloud Administrator ensure are available prior to deploying VMware Aria Suite Lifecycle? (Choose two.)

A DNS A Record for lcm.vcf.company.com that points to 10.0.0.150

An allocated IP address for the NSX standalone Tier-1 Gateway

An Application Virtual Network is configured in SDDC Manager

A DNS PTR Record for 10.0.0.1 that points to lcm.vcf.company.com

A DNS A Record for lcm.vcf.company.com that points to 10.0.0.150

An allocated IP address for the NSX standalone Tier-1 Gateway

A CA-signed SSL certificate for Aria Suite Lifecycle added to SDDC Manager

What is the first step in downloading the vSphere CLI tools to a developer workstation?

Visit the VMware Downloads page and locate the vSphere CLI tools.

Register the developer workstation with the Active Directory.

Install a compatible version of Java Runtime Environment

Visit the VMware Downloads page and locate the vSphere CLI tools.

Configure the workstation's network settings to connect to the vSphere environment.

An administrator is tasked with troubleshooting an issue where some VMs are not appearing in the vCenter inventory after a recent migration to a new vSphere environment.Which two components should the administrator examine to resolve this issue? (Choose two.)

The compatibility of the VM hardware version with the new vSphere environment.

The registration status of the VMs in the new vSphere environment.

The storage policies applied to the VMs.

The network settings of the new vSphere environment.

The compatibility of the VM hardware version with the new vSphere environment.

The registration status of the VMs in the new vSphere environment.

The vSphere permissions assigned to the VMs.

An administrator needs to delete and re-deploy an NSX Edge cluster that was originally deployed from SDDC Manager and has downloaded the edge cleaner tool.Where should the administrator run the tool to complete this task?

On the Edge cluster node VM(s).

An administrator is troubleshooting a high CPU usage issue in a VMware Cloud Foundation environment running IaaS Control Plane. Several namespaces are reporting degraded performance.What two steps should the administrator take to diagnose and potentially resolve the issue? (Choose two.)

Review the CPU usage of the ESXi hosts to identify any that are overcommitted.

Check the resource limits and reservations set on the Kubernetes namespaces.

Reboot the supervisor cluster to clear any temporary issues.

Reconfigure the DRS settings to be more aggressive in load balancing.

Review the CPU usage of the ESXi hosts to identify any that are overcommitted.

Upgrade the vSphere version to the latest release.

Check the resource limits and reservations set on the Kubernetes namespaces.

An administrator successfully removed a host from a VMware vSphere cluster and decommissioned it in SDDC Manager.What must be done before the host can be recommissioned and added back to the SDDC Manager inventory?

Loq in to the host console and select 'Reset System Configuration' from the ESXi DCUI.

Manually uninstall the NSX VIBs on the host.

From the host console, use the /sbin/qenerate-certifcates command to qenerate a new self-siqned certificate.

An administrator needs to ensure that specific virtual machines within a VMware Cloud Foundation environment use storage that can tolerate at least two host failures. As resources are limited, the configuration should use the available resources as efficiently as possible.Which three steps should be performed to configure a storage policy that meets the requirements? (Choose three.)

Create a new VM Storage Policy in the vSphere Client.

Apply the storage policy to the target VMs.

Set Failures to Tolerate to '2 failures - RAID-6 (Erasure Coding)' in the policy configuration.

Create a new VM Storage Policy in the vSphere Client.

Set Failures to Tolerate to '2 failures - RAID-1 (Mirroring)' in the policy configuration.

Reconfigure the existing Default Storage Policy in the vSphere Client.

Apply the storage policy to the target VMs.

Set Failures to Tolerate to '2 failures - RAID-6 (Erasure Coding)' in the policy configuration.

Configure the policy to use thin provisioning.

An organization wants to centralize its VM templates, ISO images, and scripts to streamline deployment processes across multiple sites using Content Libraries.Which three steps are required to create a new Content Library? (Choose three.)

Choose 'Create a new library' and enter a name and description for the library.

Select 'Local content library' and choose the datastore to store the library contents.

Navigate to the Content Libraries section in the vSphere Client.

Configure the library to automatically sync with the vSphere Update Manaqer.

Choose 'Create a new library' and enter a name and description for the library.

Select 'Local content library' and choose the datastore to store the library contents.

Navigate to the Content Libraries section in the vSphere Client.

Add the necessary permissions to allow users to upload content to the library.

An organization requires a private cloud with robust availability and disaster recovery capabilities.Which three VMware Cloud Foundation components should be considered for integration to meet these requirements? (Choose three.)

NSX for secure and isolated networking.

VMware Live Site Recovery (VLSR) for orchestrated disaster recovery.

vSphere Replication for VM-level data replication.

NSX for secure and isolated networking.

Aria Operations for Logs for enhanced logging and monitoring.

VMware Live Site Recovery (VLSR) for orchestrated disaster recovery.

vSphere Replication for VM-level data replication.

vSAN for hyper-converged storage and downtime avoidance.

When configuring a new port group on a Virtual Distributed Switch (VDS), what is the purpose of setting a VLAN ID?

To segment and isolate network traffic.

To manage storage replication settings

To segment and isolate network traffic.

To automate the creation of VMs within the port group.

To enable load balancing across multiple uplinks.

An organization has experienced performance issues and requires a detailed analysis of infrastructure performance, capacity, utilization, and compliance using VMware Aria components.What three steps should be followed to generate and analyze these reports? (Choose three.)

Create custom dashboards to monitor performance metrics

Use Aria Operations for Logs to correlate log data with performance

Run predefined reports on capacity and utilization

Create custom dashboards to monitor performance metrics

Use Aria Operations for Logs to correlate log data with performance

Access Aria Operations and navigate to the Reports section

Export the reports for further analysis and compliance verification

Run predefined reports on capacity and utilization

What is the primary purpose of configuring VM storage policies in a VMware vSphere environment?

To enforce specific storage requirements such as performance, availability, and redundancy.

To manage network traffic between VMs.

To enforce specific storage requirements such as performance, availability, and redundancy.

To configure CPU and memory reservations for VMs.

To automate the backup of virtual machines.

An administrator is tasked with migrating a set of virtual machines between data centers using HCX.To minimize downtime and ensure data consistency, which two HCX migration options should be considered? (Choose two.)

HCX Replication Assisted vMotion (RAV)

What is the primary purpose of configuring a Virtual Distributed Switch (VDS) in a vSphere environment?

To provide centralized management of network configurations across multiple ESXi hosts.

To automate the deployment of virtual machines.

To provide centralized management of network configurations across multiple ESXi hosts.

To manage storage policies for datastores.

To enable VM snapshots across multiple datastores.

A VMware Cloud Foundation administrator notices that the SDDC Manager dashboard shows an alert indicating that one of the ESXi hosts in their workload domain is in a Not Responding state.What is the first troubleshooting step that should be performed to resolve this issue?

Check the network connectivity between the ESXi host and the SDDC Manager.

Remove and re-add the ESXi host to the workload domain.

Upgrade the ESXi host to the latest version.

Check the network connectivity between the ESXi host and the SDDC Manager.

Reboot the ESXi host from the SDDC Manager interface.

The administrator of a VMware Cloud Foundation environment notices that log data from multiple components, including vSphere, NSX, and vSAN, is not being collected properly in Aria Operations for Logs.What two steps should the administrator perform to resolve this issue? (Choose two.)

Check the network connectivity between the Aria Operations for Logs server and the VMware Cloud Foundation components.

Ensure that the syslog configuration on each ESXi host is pointing to the correct Aria Operations for Logs server.

Check the network connectivity between the Aria Operations for Logs server and the VMware Cloud Foundation components.

Increase the storage capacity of the Aria Operations for Logs server to accommodate more log data.

Reconfigure the log level settings on all vSphere components to ensure detailed logging.

Verify that the Aria Operations for Logs license is still valid and active.

Ensure that the syslog configuration on each ESXi host is pointing to the correct Aria Operations for Logs server.

What are the steps to apply software updates in a VMware Cloud Foundation deployment using the VMware Async Patch CLI Tool?

Download the patch bundle, upload the bundle to SDDC Manager, and then apply the patch.

Upload the patch bundle to SDDC Manager, download the confirmation, and then apply the patch.

Apply the patch directly in the VMware SDDC Manager UI from the Software Depot.

Download the patch bundle, upload the bundle to SDDC Manager, and then apply the patch.

Download the patch bundle, apply the patch directly, and then upload the confirmation to SDDC Manager.

An Administrator is tasked with setting up a new workload domain with VMware Cloud Foundation. The workload domain will have the following configuration:vSphere with Tanzu to support Kubernetes workloadsNSX for container and virtual machine networkingAria Operations will be configured for monitoring of the infrastructureWhich three steps should be taken to complete the installation and configuration of this workload domain? (Choose three.)

Configure NSX segments for Kubernetes namespaces.

Deploy the Supervisor Cluster for IaaS Control Plane.

Enable workload management in vCenter Server.

Install Aria Operations agents on all ESXi hosts.

Integrate IaaS Control Plane with the existing vCenter Server.

Configure NSX segments for Kubernetes namespaces.

Deploy the Supervisor Cluster for IaaS Control Plane.

Enable workload management in vCenter Server.

What is the primary purpose of configuring Role-Based Access Control (RBAC) in vCenter?

To manage user access and permissions within the vCenter environment.

To ensure vCenter runs on multiple operating systems.

To provide a method for vCenter to communicate with ESXi hosts.

To manage user access and permissions within the vCenter environment.

To enable vCenter integration with external storage systems.

An administrator is responsible for monitoring the logs of multiple vSphere components using VMware Aria Operations for Logs. They notice an increase in error logs for a specific ESXi host.Which two steps should be taken to pinpoint the issue? (Choose two.)

Filter the loos by the ESXi host name and error severity.

Check for patterns or repeated error messages over a specific time frame.

Restart the ESXi host to resolve the issue immediately

Filter the loos by the ESXi host name and error severity.

Correlate the error logs with recent configuration changes on the ESXi host.

Check for patterns or repeated error messages over a specific time frame.

Delete all old logs to free up space and generate new logs.

An administrator needs to deploy a Kubernetes cluster on a vSphere IaaS control plane (formerly vSphere with Tanzu) to host a new application.Which three steps should be followed to successfully deploy the Kubernetes cluster? (Choose three.)

Configure a Load Balancer for the Kubernetes control plane nodes.

Configure a vSphere Namespace and assign resource quotas.

Enable Workload Management on the vSphere Cluster.

Configure a Load Balancer for the Kubernetes control plane nodes.

Create a new VM template for the Kubernetes nodes.

Configure a vSphere Namespace and assign resource quotas.

Enable Workload Management on the vSphere Cluster.

Which is the appropriate first action to take to resolve dropped network packets on an ESXi host?

Check physical network switch configuration

Increase the CPU and memory allocation for VMs

Migrate VMs to another data store

An administrator needs to ensure that their VMware Cloud Foundation-based private cloud solution can support multi-tenancy for different departments within their organization.What two configurations and components are necessary to achieve this? (Choose two.)

Use vSphere Resource Pools to allocate resources to different departments.

Use NSX to create isolated network segments for each tenant.

Configure vSAN storage policies for each department.

Use vSphere Resource Pools to allocate resources to different departments.

Deploy Aria Automation to enable self-service provisioning for tenants.

Use NSX to create isolated network segments for each tenant.

An administrator has a requirement to share the contents of a Content Library across multiple vCenter instances.What steps should the administrator perform to meet this requirement?

Create a Local content library on a single vCenter instance and enable publishing

Create a Subscribed content library on a single vCenter instance and perform a synchronization

Create a Subscribed content library on each vCenter instance and enable publishing

Create a Local content library on each vCenter instance and perform a synchronization

Create a Local content library on a single vCenter instance and enable publishing

What are three prerequisites for deploying an NSX Edge cluster in a VMware Cloud Foundation solution? (Choose three.)

Verify that the NSX host overlay VLAN and NSX Edge overlay VLAN are routed to each other.

Create DNS entries for the NSX Edge nodes.

Assign separate VLAN IDs and subnets for the NSX host overlay and NSX Edge overlay networks.

Verify that the NSX host overlay VLAN and NSX Edge overlay VLAN are routed to each other.

Set up vSAN storage policies for the Edge VMs.

Create DNS entries for the NSX Edge nodes.

Install Aria Operations and enable Edge Cluster monitoring.

Assign separate VLAN IDs and subnets for the NSX host overlay and NSX Edge overlay networks.

What is the primary benefit of using VMware vCenter Content Libraries?

They enable centralized management and distribution of VM templates, ISO images, and scripts.

They facilitate the creation of virtual networks.

They allow for the automation of VM snapshots.

They provide enhanced security for vCenter Server.

VMware 2V0-11.25 Practice Test 2 - Free Online Exam Prep & Questions

An administrator needs to add a new cluster to an existing VI workload domain. The existing cluster in the domain is using NFS as its principal storage.

Which principal storage options are available for the new cluster?

Become a Premium Member for full access

Unlock Premium Member

VMware 2V0-11.25 Practice Test 2

Question

VMware 2V0-11.25 Practice Tests

Practice Tests