An Architect is responsible for designing a VMware Cloud Foundation (VCF)-based solution for a customer. During the discovery workshop, the following requirements were stated by the customer:All applications/workloads designated as business critical have a Recovery Point Objective (RPO) of 1 business hour.The infrastructure components of the VCF solution must have a Recovery Time Objective (RTO) of 4 business hours.In the context provided, what does the RTO measure?

It determines the maximum tolerable amount of time allowed before an application/service should be recovered to a usable state.

It determines the minimum amount of data loss that can be tolerated.

It determines the maximum tolerable amount of time allowed before an application/service should be recovered to a usable state.

It determines the minimum tolerable amount of time allowed before an application/service should be recovered to a usable state.

It determines the maximum amount of data loss that can be tolerated.

The following requirements were identified in an architecture workshop for a VMware Cloud Foundation (VCF) design project utilizing vSAN for its primary storage solution:REQ001: Application must maintain a minimum of 1,000 transactions per second (TPS) during business hours excluding disaster recovery (DR) scenarios.REQ002: Automatic DRS and HA must be utilized.REQ003: Planned maintenance must be executed outside of business hours.Which of the following test scenarios should be added and performed to validate these requirements?

Trigger a failure of an ESXi host.

Trigger a Virtual Machine vMotion operation.

Trigger a vCenter Server update.

Trigger a vSAN disk group evacuation.

Trigger a failure of an ESXi host.

An Architect has been tasked with reviewing a VMware Cloud Foundation design document. Observe the following requirements:REQ01: The solution must support the private cloud cybersecurity industry and local standards and controls.REQ02: The solution must ensure that the cloud services are transitioned to operation teams.REQ03: The solution must provide a self-service portal.REQ04: The solution must provide the ability to consume storage based on policies.REQ05: The solution should provide the ability to extend networks between different availability zones.REQ06: The solution should allow only supported versions of management solutions to be deployed.Observe the following design decisions:DD01: There will be a clustered deployment of Aria Automation.DD02: There will be an integration between Aria Automation and multiple geo-located vCenter Servers.DD03: Aria Suite Lifecycle will be deployed to provide lifecycle management of Aria Suite components.Based on the stated requirements, what are the three implications for taking the stated design decisions? (Choose three.)

Aria Automation must have network access to all vCenter Servers.

An external database is required for Aria Automation clustering.

A load balancer is required for Aria Automation high availability.

Aria Automation must have network access to all vCenter Servers.

Aria Suite Lifecycle should be deployed through the SDDC Manager.

An external database is required for Aria Automation clustering.

A load balancer is required for Aria Automation high availability.

The latency between the Aria Automation Appliances must be less than 2ms.

The vCenter Servers must have network access to each other.

Which statement defines the purpose of Technical Requirements?

Technical requirements define how the goals and objectives can be achieved.

Technical requirements define which goals and objectives can be achieved.

Technical requirements define what goals and objectives need to be achieved.

Technical requirements define which audience needs to be involved.

Technical requirements define how the goals and objectives can be achieved.

An architect is tasked with updating the design for an existing VMware Cloud Foundation (VCF) deployment to include four vSAN ESA ready nodes. The existing deployment comprises the following:Four homogenous vSAN ESXi ready nodes in the management domain.Four homogenous ESXi nodes with iSCSI principal storage in workload domain A.What should the architect recommend when including this additional capacity for application workloads?

Create a new vLCM baseline workload domain with the four new nodes.

Commission the four new nodes into the existing workload domain A cluster.

Create a new vLCM image workload domain with the four new nodes.

Create a new vLCM baseline cluster in the existing workload domain with the four new nodes.

Create a new vLCM baseline workload domain with the four new nodes.

The following are a list of design decisions made relating to networking:NSX Distributed Firewall (DFW) rule to block all traffic by default.Implement overlay network technology to scale across data centers.Configure Cisco Discovery Protocol (CDP) - Listen mode on all Distributed Virtual Switches (DVS).Use of 2x 64-port Cisco Nexus 9300 for top-of-rack ESXi host switches.Which design decision would an architect document within the logical design?

Implement overlay network technology to scale across data centers.

Use of 2x 64-port Cisco Nexus 9300 for top-of-rack ESXi host switches.

NSX Distributed Firewall (DFW) rule to block all traffic by default.

Implement overlay network technology to scale across data centers.

Configure Cisco Discovery Protocol (CDP) - Listen mode on all Distributed Virtual Switches (DVS).

An architect is designing a new VCF solution to meet the following requirements:The solution must be deployed across two availability zones.The physical hosts must be installed in a single rack per availability zone.Workloads running in the cluster must be able to run on hosts in either availability zone.The architect has decided that to meet these requirements, the solution will be deployed using the Single Instance - Multiple Availability Zones VCF Topology. When considering the design for the network, what should the architect include in the logical design to meet these requirements?

A single NSX Overlay Transport Zone for all clusters to carry the traffic between the ESXi hosts.

A physical network fabric in a leaf-spine configuration with dual Cisco switches within each availability zone.

A highly available gateway that supports the failure of an entire availability zone.

A 25-GbE port on each Top of Rack (ToR) switch connected to the ESXi host uplinks.

A single NSX Overlay Transport Zone for all clusters to carry the traffic between the ESXi hosts.

The following requirements were identified in an architecture workshop for a VMware Cloud Foundation (VCF) design project using vSAN as the primary storage solution:REQ001: The application must maintain a minimum of 1,000 transactions per second (TPS) during business hours, excluding disaster recovery (DR) scenarios.REQ002: Automatic DRS and HA must be utilized.REQ003: Planned maintenance must be performed outside of business hours.While monitoring the TPS of the application, which of the following is NOT a valid test case to validate these requirements?

Trigger a vCenter upgrade workflow.

Trigger a vSphere High Availability (HA) failover activity.

Trigger a vSAN disk group cache drive failure.

Trigger fully automatic DRS vMotion activity.

Trigger a vCenter upgrade workflow.

A customer has a database cluster running in a VCF cluster with the following characteristics:40/60 Read/Write ratio.High IOPS requirement.No contention on an all-flash OSA vSAN cluster in a VI Workload Domain.Which two vSAN configuration options should be configured for best performance? (Choose two.)

Deduplication and Compression disabled

Deduplication and Compression enabled

When determining the compute capacity for a VMware Cloud Foundation VI Workload Domain, which three elements should be considered when calculating usable resources? (Choose three.)

vSAN space efficiency feature enablement

An architect is working with a service provider to design a VMware Cloud Foundation (VCF) solution that is required to host workloads for multiple tenants. The following requirements were gathered:Each tenant requires full access to their own vCenter.Each tenant will utilize and manage their own identity provider for access.A total of 28 tenants are expected to be onboarded.Each tenant will have their own independent VCF lifecycle maintenance schedule.Which VCF architecture option will meet these requirements?

Two VCF instances consolidated architecture model with 14 tenant clusters each

A single VCF instance consolidated architecture model with 28 tenant clusters

A single VCF instance standard architecture model and 28 isolated SSO domains

Two VCF instances consolidated architecture model with 14 tenant clusters each

Two VCF instances with standard architecture model and 14 isolated SSO domains each

An architect is designing a VMware Cloud Foundation (VCF)-based solution for a customer with the following requirement:The solution must not have any single points of failure.To meet this requirement, the architect has decided to incorporate physical NIC teaming for all vSphere host servers. When documenting this design decision, which consideration should the architect make?

Each NIC team must comprise NICs from different physical NIC cards.

Embedded NICs should be avoided for NIC teaming.

Only 10GbE NICs should be utilized for NIC teaming.

Each NIC team must comprise NICs from the same physical NIC card.

Each NIC team must comprise NICs from different physical NIC cards.

An architect is responsible for updating the design of a VMware Cloud Foundation solution for a pharmaceuticals customer to include the creation of a new cluster that will be used for a new research project. The applications that will be deployed as part of the new project will include a number of applications that are latency-sensitive. The customer has recently completed a right-sizing exercise using VMware Aria Operations that has resulted in a number of ESXi hosts becoming available for use. There is no additional budget for purchasing hardware. Each ESXi host is configured with:2 CPU sockets (each with 10 cores)512 GB RAM divided evenly between socketsThe architect has made the following design decisions with regard to the logical workload design:The maximum supported number of vCPUs per virtual machine size will be 10.The maximum supported amount of RAM (GB) per virtual machine will be 256.What should the architect record as the justification for these decisions in the design document?

The maximum resource configuration will ensure the virtual machines will adhere to a single NUMA node boundary.

The maximum resource configuration will ensure efficient use of RAM by sharing memory pages between virtual machines.

The maximum resource configuration will ensure the virtual machines will cross NUMA node boundaries.

The maximum resource configuration will ensure the virtual machines will adhere to a single NUMA node boundary.

The maximum resource configuration will ensure each virtual machine will exclusively consume a whole CPU socket.

Due to limited budget and hardware, an administrator is constrained to a VMware Cloud Foundation (VCF) consolidated architecture of seven ESXi hosts in a single cluster. An application that consists of two virtual machines hosted on this infrastructure requires minimal disruption to storage I/O during business hours. Which two options would be most effective in mitigating this risk without reducing availability? (Choose two.)

Implement FTT=1 Mirror for this application virtual machine

Perform all host maintenance operations outside of business hours

Apply 100% CPU and memory reservations on these virtual machines

Implement FTT=1 Mirror for this application virtual machine

Replace the vSAN shared storage exclusively with an All-Flash Fibre Channel shared storage solution

Perform all host maintenance operations outside of business hours

Enable fully automatic Distributed Resource Scheduling (DRS) policies on the cluster

A VMware Cloud Foundation multi-AZ (Availability Zone) design mandates that:All availability zones must operate independently of each other.The availability SLA must adhere to no less than 99.9%.What would be the three design decisions that would help satisfy those requirements? (Choose three.)

Configure array-based replication between the selected AZ(s) for the management domain

Make sure all configuration backups are replicated between the selected AZ(s)

Configure a non-routable separate recovery VLAN for the infrastructure management components within each AZ

Configure array-based replication between the selected AZ(s) for the management domain

Make sure all configuration backups are replicated between the selected AZ(s)

Make sure the recovery VLAN for the infrastructure management components has access to both AZ(s)

Choose two distant AZ(s) and consider each AZ the DR for the other

Choose two close proximity AZ(s) and configure a stretched management workload domain

Configure a non-routable separate recovery VLAN for the infrastructure management components within each AZ

An architect is documenting the design for a new VMware Cloud Foundation solution. Which statement would be an example of a conceptual model for this solution?

A high-level diagram of the VMware Cloud Foundation solution showing the workload domains with the number of physical hosts per cluster

A detailed description of the VMware Cloud Foundation solution configuration, including host names and IP addresses

A detailed diagram of the interfaces of the NSX Edge components within the management domain in the data center

A high-level diagram of the VMware Cloud Foundation solution showing the workload domains with the number of physical hosts per cluster

A high-level overview of the solution, including risks, assumptions, and constraints

As part of a VMware Cloud Foundation (VCF) design, an architect is responsible for planning for the migration of existing workloads using HCX to a new VCF environment. Which two prerequisites would the architect require to complete the objective? (Choose two.)

Service accounts for the applicable appliances.

Active Directory configured as an authentication source.

Extended IP spaces for all moving workloads.

DRS enabled within the VCF instance.

Service accounts for the applicable appliances.

NSX Federation implemented between the VCF instances.

Active Directory configured as an authentication source.

An architect is designing a new VMware Cloud Foundation (VCF) solution. During the discovery workshops, the customer explained that the solution will initially be used to host a single business application and some internal management tooling. The customer provided the following background information:The business application consists of two virtual machines.The business application is sensitive to changes in its storage I/O.The business application must be available during the company's business hours of 9 AM - 5 PM on weekdays.The architect has made the following design decisions in response to the customer's requirements and the additional information provided during discovery:The solution will use the VCF consolidated architecture model.A single cluster will be created, consisting of six ESXi hosts.Which design decision should the architect include in the design to mitigate the risk of impacting the business application?

Perform ESXi host maintenance activities outside of the stated business hours.

Use resource pools to apply CPU and memory reservations on the business application virtual machines.

Implement FTT=6 for the business application virtual machines.

Perform ESXi host maintenance activities outside of the stated business hours.

Replace the vSAN shared storage exclusively with an All-Flash Fibre Channel shared storage solution.

Use Anti-Affinity Distributed Resource Scheduler (DRS) rules on the business application virtual machines.

An administrator is designing a new VMware Cloud Foundation instance that has to support management, VDI, DB, and general workloads. The DB workloads will stay the same in terms of resources over time. However, the general workloads and VDI environments are expected to grow over the next 3 years. What should the architect include in the documentation?

An assumption that the DB workload resource requirements will remain static.

A constraint of including the management, DB, and VDI environments.

A requirement consisting of the growth of the general workloads and VDI environment.

A risk that the VCF instance may not have enough capacity for growth.

An architect is documenting the design for a new VMware Cloud Foundation-based solution. Following the requirements gathering workshops held with customer stakeholders, the architect has made the following assumptions:The customer will provide sufficient licensing for the scale of the new solution.The existing storage array that is to be used for the user workloads has sufficient capacity to meet the demands of the new solution.The data center offers sufficient power, cooling, and rack space for the physical hosts required by the new solution.The physical network infrastructure within the data center will not exceed the maximum latency requirements of the new solution.Which two risks must the architect include as a part of the design document because of these assumptions? (Choose two.)

The physical network infrastructure may not provide sufficient bandwidth to support the user workloads.

The customer may not have licensing that covers all of the physical cores the design requires.

The physical network infrastructure may not provide sufficient bandwidth to support the user workloads.

The customer may not have sufficient data center power, cooling, and physical rack space available.

The customer may not have licensing that covers all of the physical cores the design requires.

The assumptions may not be approved by a majority of the customer stakeholders before the solution is deployed.

An architect is collaborating with a client to design a VMware Cloud Foundation (VCF) solution required for a highly secure infrastructure project that must remain isolated from all other virtual infrastructures. The client has already acquired six high-density vSAN-ready nodes, and there is no budget to add additional nodes throughout the expected lifespan of this project. Assuming capacity is appropriately sized, which VCF architecture model and topology should the architect suggest?

Single Instance - Single Availability Zone Standard architecture model

Single Instance - Multiple Availability Zone Standard architecture model

Single Instance Consolidated architecture model

Single Instance - Single Availability Zone Standard architecture model

Multiple Instance - Single Availability Zone Standard architecture model

An architect is planning the deployment of Aria components in a VMware Cloud Foundation environment using SDDC Manager and must prepare a logical diagram with networking connections for particular Aria products. Which are two valid Application Virtual Networks for Aria Operations deployment using SDDC Manager? (Choose two.)

Region-A - Overlay backed segment

X-Region - Overlay backed segment

A VMware Cloud Foundation (VCF) platform has been commissioned, and lines of business are requesting approved virtual machine applications via the platform's integrated automation portal. The platform was built following all provided company security guidelines and has been assessed against Sarbanes-Oxley Act of 2002 (SOX) regulations. The platform has the following characteristics:One Management Domain with a single cluster, supporting all management services with all network traffic handled by a single Distributed Virtual Switch (DVS).A dedicated VI Workload Domain with a single cluster for all line of business applications.A dedicated VI Workload Domain with a single cluster for Virtual Desktop Infrastructure (VDI).Aria Operations is being used to monitor all clusters.VI Workload Domains are using a shared NSX instance.An application owner has asked for approval to install a new service that must be protected as per the Payment Card Industry (PCI) Data Security Standard, which is going to be verified by a third-party organization. To support the new service, which additional non-functional requirement should be added to the design?

The VCF platform and all PCI application virtual machines must be monitored using the Aria Operations Compliance Pack for Payment Card Industry.

The VCF platform and all PCI application virtual machines must be assessed for SOX compliance.

The VCF platform and all PCI application virtual machine network traffic must be routed via NSX.

The VCF platform and all PCI application virtual machines must be assessed against Payment Card Industry Data Security Standard (PCI DSS) compliance.

An architect is working on a leaf-spine design requirement for NSX Federation in VMware Cloud Foundation. Which recommendation should the architect document?

Jumbo frames on the components of the physical network between the VMware Cloud Foundation instances.

Use a physical network that is configured for EIGRP routing adjacency.

Layer 3 device that supports OSPF.

Ensure that the latency between VMware Cloud Foundation instances that are connected in an NSX Federation is less than 1500 ms.

Jumbo frames on the components of the physical network between the VMware Cloud Foundation instances.

VMware 2V0-13.24 Practice Test 2 - Free Online Exam Questions 41-80

An architect is designing a VMware Cloud Foundation (VCF)-based private cloud solution for a customer that will include two physical locations. The customer has stated the following requirement:

All management tooling must be resilient at the component level within a single site.

When considering the design decisions for VMware Aria Suite components, what should the Architect document to meet the stated requirement?

Become a Premium Member for full access

Unlock Premium Member

VMware 2V0-13.24 Practice Test 2

Question

VMware 2V0-13.24 Practice Tests

Practice Tests